BWT Cosmy The Bot 250 Robotic Pool Cleaner Instruction Manual

1. تعارف

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. حفاظتی معلومات

چوٹ یا نقصان کے خطرے کو کم کرنے کے لیے ہمیشہ درج ذیل حفاظتی تدابیر پر عمل کریں:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• جب کلینر چل رہا ہو تو بچوں اور پالتو جانوروں کو پول کے علاقے سے دور رکھیں۔
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. مصنوعات کے اجزاء

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• مین یونٹ: The robotic cleaner body, housing the motor and filtration system.
• فلٹر ٹوکری: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• بجلی کی فراہمی یونٹ: Converts AC power to safe DC power for the cleaner.

تصویر 3.1: سامنے view of the cleaner, highlighting the cleaning brushes and intake area.

تصویر 3.2: نیچے view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

تصویر 3.3: اندرونی view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. سیٹ اپ

1. کلینر کو کھولیں: Carefully remove the cleaner and all accessories from the packaging.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. پول میں جگہ: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. پلگ ان: Plug the power supply unit into a grounded electrical outlet.

5. آپریٹنگ ہدایات

1. صفائی سائیکل شروع کریں: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. سکشن پاور کو ایڈجسٹ کریں: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. مانیٹر صفائی: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. پول سے ہٹائیں: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6 دیکھ بھال

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Cleaning the Filter Basket

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. پاور منقطع کریں: Always unplug the power supply unit from the electrical outlet before cleaning.
2. فلٹر کمپارٹمنٹ کھولیں: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. فلٹر ٹوکری کو ہٹا دیں: Grasp the handle of the filter basket and lift it out of the cleaner.
4. کللا فلٹر: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Reinsert Filter: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. ڑککن بند کریں: Close the filter compartment lid securely.

تصویر 6.1: اوپر view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2 عمومی صفائی اور ذخیرہ

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
• Coil the floating cable loosely to prevent kinks or damage.

7 خرابیوں کا سراغ لگانا

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

اگر ان حلوں کو آزمانے کے بعد بھی مسئلہ برقرار رہتا ہے، تو براہ کرم کسٹمر سپورٹ سے رابطہ کریں۔

8. وضاحتیں

9. وارنٹی اور سپورٹ

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

مینوفیکچرر: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.