IMEX GTN047/NG NÁPOLES Thermostatic Built-in Shower Set

تعارف

Thank you for choosing the IMEX GTN047/NG NÁPOLES Thermostatic Built-in Shower Set. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions carefully before installation and retain them for future reference.

This thermostatic shower set is designed for built-in installation, offering a sleek and modern aesthetic. It features a main rain shower head, a hand shower, and a thermostatic mixer for precise temperature control.

حفاظتی معلومات

• پیشہ ورانہ تنصیب کی سفارش کی جاتی ہے: Installation should be performed by a qualified plumber in accordance with local plumbing and building codes.
• پانی کی فراہمی: Ensure the main water supply is turned off before beginning any installation work.
• پانی کا دباؤ: Verify that your home's water pressure is within the recommended range for optimal performance.
• گرم پانی کی حفاظت: The thermostatic mixer is designed to prevent scalding, but always test water temperature before use, especially for children or individuals with sensitive skin.
• اجزاء کی ہینڈلنگ: Handle all components with care to avoid damage to finishes or internal mechanisms.

پیکیج کے مشمولات

براہ کرم انسٹال کرنے سے پہلے چیک کریں کہ تمام اجزاء موجود ہیں اور بغیر کسی نقصان کے:

• Thermostatic Mixer Valve (Built-in)
• Control Plate and Handles
• بارش شاور سر
• Shower Arm (Wall-mounted)
• ہینڈ شاور
• شاور نلی
• Wall Outlet / Hand Shower Holder
• Mounting Hardware (screws, anchors, seals)

تصویر: ختمview of the main components included in the IMEX GTN047/NG shower set.

سیٹ اپ اور انسٹالیشن

This section provides general guidelines for the installation of your built-in shower set. Due to the complexity of built-in plumbing, professional installation is strongly recommended.

1. پری انسٹالیشن چیک

1. اجزاء کا معائنہ کریں: اس بات کو یقینی بنائیں کہ تمام پرزے موجود ہیں اور بغیر کسی نقصان کے۔
2. پانی کی فراہمی: باتھ روم کو پانی کی مین سپلائی بند کر دیں۔
3. دیوار کی تیاری: Prepare the wall cavity according to the dimensions provided in the technical diagram for the built-in mixer and piping.
4. پانی کے کنکشن: Identify hot and cold water lines. Hot water is typically on the left, cold on the right.

2. Mixer Valve Installation

1. Mount the built-in thermostatic mixer valve securely within the wall cavity, ensuring it is level and at the correct depth relative to the finished wall surface.
2. Connect the hot and cold water supply lines to the designated inlets on the mixer valve.
3. Connect the outlets from the mixer valve to the pipes leading to the rain shower head and the hand shower wall outlet.
4. دیوار کو بند کرنے سے پہلے لیک ٹیسٹ کروائیں۔

3. Shower Head and Hand Shower Installation

1. Install the wall-mounted shower arm for the rain shower head, ensuring it is securely fastened and sealed. Attach the rain shower head to the arm.
2. Install the wall outlet/hand shower holder at a convenient height. Connect the shower hose to the wall outlet and the hand shower.

4. فائنل اسمبلی

1. Once the wall is finished, install the decorative control plate and handles onto the thermostatic mixer valve.
2. مین واٹر سپلائی کو آن کریں اور چیک کریں کہ کوئی رساو ہے۔

Image: Technical diagram showing dimensions and installation details for the shower set components.

آپریٹنگ ہدایات

The IMEX GTN047/NG shower set features a single thermostatic mixer with two control functions:

• درجہ حرارت کنٹرول: The lower handle controls the water temperature. Rotate it to adjust the temperature. A safety stop is typically present at 38°C (100°F) to prevent accidental scalding. To exceed this temperature, press the safety button and continue rotating the handle.
• Flow and Diverter Control: The upper handle controls the water flow and diverts water between the main rain shower head and the hand shower. Rotate it to increase or decrease flow, and turn it to select the desired shower outlet.

Image: The complete IMEX GTN047/NG shower set, illustrating the main components and control panel.

دیکھ بھال

Proper care and maintenance will ensure the longevity and appearance of your IMEX shower set.

ختم کی صفائی

• Clean the matte black finish regularly with a soft cloth and mild soap and water.
• مت کرو use abrasive cleaners, scouring pads, or chemical cleaners containing ammonia, bleach, or alcohol, as these can damage the finish.
• پانی کے دھبوں کو روکنے کے لیے صاف پانی سے اچھی طرح دھو لیں اور نرم کپڑے سے خشک کریں۔

Shower Head Maintenance

• The nozzles on the rain shower head and hand shower are designed to be easy to clean. Periodically rub the silicone nozzles to dislodge any limescale buildup.
• For more stubborn limescale, a solution of white vinegar and water can be used. Soak the shower head (if removable) or apply the solution with a cloth, then rinse thoroughly.

خرابی کا سراغ لگانا

If you encounter issues with your shower set, refer to the following common problems and solutions:

• پانی کا بہاؤ یا کم دباؤ:
  • چیک کریں کہ آیا مین واٹر سپلائی پوری طرح کھلی ہوئی ہے۔
  • Inspect for blockages in the shower head nozzles or hose.
  • Verify that the mixer valve is fully open.
• پانی کا متضاد درجہ حرارت:
  • Ensure hot and cold water supplies are connected correctly.
  • Check the thermostatic cartridge for limescale buildup (may require professional cleaning or replacement).
  • Verify stable hot water supply from your water heater.
• کنکشنز سے لیکس:
  • پانی کی سپلائی فوری طور پر بند کر دیں۔
  • Check all connections for proper tightening and ensure seals/washers are correctly seated and not damaged.

For persistent issues, please contact a qualified plumber or IMEX customer support.

وضاحتیں

وارنٹی اور سپورٹ

For warranty information, please refer to the documentation provided at the time of purchase or visit the official IMEX webسائٹ کسی بھی وارنٹی دعووں کے لیے اپنی خریداری کا ثبوت رکھیں۔

If you require technical assistance or have questions not covered in this manual, please contact IMEX customer support through their official channels.