پروجیکٹا 12V 8.0A 8-Stagای خودکار بیٹری چارجر صارف دستی

1. تعارف

Thank you for choosing the Projecta PJ-AC080-2 12V 8.0A 8-Stage Automatic Battery Charger. This charger is designed for automotive and marine lead acid batteries, offering a fully automatic, spark-free, and polarity-protected charging and maintenance solution. Its advanced 8-stage charging process ensures optimal battery health and longevity. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

2. اہم حفاظتی معلومات

Please read and understand all safety warnings and instructions before using this battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• وینٹیلیشن: Always use the charger in a well-ventilated area. Batteries can produce explosive gases.
• آنکھ اور جلد کی حفاظت: Wear appropriate eye protection and clothing when working near batteries. Battery acid is corrosive.
• Spark-Free Connections: Ensure connections are made and broken in a spark-free manner. The charger is designed to be spark-free, but caution is always advised.
• قطبیت: مثبت (+) چارجر cl کو جوڑیں۔amp to the positive (+) battery terminal and the negative (-) charger clamp to the negative (-) battery terminal. The charger is polarity protected.
• پاور منقطع کریں: بیٹری کو منسلک کرنے یا منقطع کرنے سے پہلے ہمیشہ AC پاور کو چارجر سے منقطع کریں۔amps.
• بچے اور پالتو جانور: چارجر اور بیٹری کو بچوں اور پالتو جانوروں کی پہنچ سے دور رکھیں۔
• تباہ شدہ سامان: اگر چارجر کو کسی بھی طرح سے نقصان پہنچا ہے تو اسے نہ چلائیں۔
• اندرونی استعمال: This charger is designed for indoor use. Do not expose to rain or excessive moisture.

3. پروڈکٹ ختمview اور خصوصیات

Figure 3.1: Projecta 12V 8.0A 8-Stage Automatic Battery Charger with power cord and battery clamps.

اہم خصوصیات:

• مکمل طور پر خودکار: Simply connect and forget without the risk of overcharging.
• آٹھ ایسtages: Once connected, the charger will do the rest whether you're charging or maintaining the battery to keep it ready for use.
• Spark-Free and Polarity Protected: Safe to use while the battery is still in the vehicle.
• Fused Wiring Harness: Quick connect fused wiring harness for permanent installation (BCWH).
• All Included: Comes with harness, battery clamps, and 9.84 ft (3m) extension cable.

4. باکس میں کیا ہے۔

Figure 4.1: All components included with the Projecta Battery Charger.

Your Projecta PJ-AC080-2 Battery Charger package should contain the following items:

• پروجیکٹا 12V 8.0A 8-Stage Automatic Battery Charger Unit
• بیٹری کلamps (مثبت کے لیے سرخ، منفی کے لیے سیاہ)
• Fused Wiring Harness with Ring Terminals (for permanent installation)
• 9.84 ft (3m) Extension Cable
• صارف دستی (یہ دستاویز)

5. سیٹ اپ اور کنکشن

Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Always connect the charger to the battery before plugging it into the AC power outlet.

1. بیٹری تیار کریں: If the battery is in a vehicle, ensure the vehicle's ignition is off and all accessories are turned off. For marine applications, ensure the vessel is securely moored.
2. بیٹری CL کو جوڑیں۔amps:
   • مربوط کریں۔ سرخ مثبت (+) بیٹری clamp کو مثبت (+) بیٹری ٹرمینل
   • مربوط کریں۔ سیاہ منفی (-) بیٹری clamp کو منفی (-) بیٹری ٹرمینل
   

   شکل 5.1: گاڑی کی بیٹری سے چارجر کا مناسب کنکشن۔
   

   شکل 5.2: تفصیلی view of the positive (red) and negative (black) battery clamps.

3. Optional Fused Wiring Harness: For permanent installation, connect the ring terminals of the fused wiring harness to the battery terminals (red to positive, black to negative). This allows for quick connection/disconnection of the charger unit.
   

   Figure 5.3: The included fused wiring harness for permanent battery connection.

4. AC پاور سے جڑیں: Once the battery connections are secure, plug the charger's AC power cord into a standard 120V AC wall outlet.

6. آپریٹنگ ہدایات

The Projecta PJ-AC080-2 is a fully automatic 8-stage charger. Once connected to the battery and power, it will automatically detect the battery type and condition, then proceed through the optimal charging cycle.

8-ایسtagای چارج کرنے کا عمل:

The charger employs a sophisticated 8-stage charging algorithm to ensure efficient and safe charging, extending battery life. The stagاس میں عام طور پر شامل ہیں:

1. ڈیسلفیشن: Recovers sulphated batteries by applying pulse current.
2. نرم آغاز: Gently introduces current to the battery to prevent damage, especially for deeply discharged batteries.
3. بلک چارج: Charges the battery at its maximum rate (8.0A) until it reaches approximately 80% capacity.
4. جذب: Charges the battery at a decreasing current to 100% capacity.
5. تجزیہ: Tests the battery to determine if it can hold a charge.
6. بحالی: Applies a controlled overcharge to recondition and equalize the battery cells (if needed).
7. فلوٹ: بیٹری کو مستقل والیوم پر برقرار رکھتا ہے۔tage, ready for use.
8. Pulse Maintenance: Periodically pulses the battery to keep it optimally charged during long-term storage.

The charger's display will indicate the current voltage and charging status. No manual intervention is required during the charging process.

چارجر کو منقطع کرنا:

چارجر کو منقطع کرنے کے لیے:

1. وال آؤٹ لیٹ سے AC پاور کورڈ کو ان پلگ کریں۔
2. Disconnect the negative (-) black clamp بیٹری ٹرمینل سے
3. Disconnect the positive (+) red clamp بیٹری ٹرمینل سے

7 دیکھ بھال

Proper maintenance ensures the longevity and optimal performance of your Projecta battery charger.

• صفائی: Disconnect the charger from all power sources before cleaning. Wipe the casinجی ایک نرم کے ساتھ، ڈیamp کپڑا سخت کیمیکل یا کھرچنے والے کلینر کا استعمال نہ کریں۔
• کیبل معائنہ: Regularly inspect the power cord, battery clamps, and all cables for any signs of damage, fraying, or corrosion. Do not use the charger if any cables are damaged.
• ذخیرہ: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, excessive heat, and moisture.
• بیٹری ٹرمینلز: Ensure battery terminals are clean and free of corrosion before connecting the charger.

8 خرابیوں کا سراغ لگانا

If you encounter issues with your Projecta battery charger, refer to the following common problems and solutions:

9. وضاحتیں

10. وارنٹی اور سپورٹ

Projecta products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included with your product or visit the official Projecta webسائٹ

If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Projecta Customer Support. Contact information can typically be found on the Projecta webسائٹ یا مصنوعات کی پیکیجنگ پر۔

آن لائن وسائل: For the latest information, FAQs, and product updates, please visit the official Projecta webسائٹ: www.projecta.com.au (نوٹ: یہ پلیس ہولڈر ہے۔ URL, please refer to actual product documentation for correct webسائٹ)۔