1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. پیکیج کے مشمولات
براہ کرم تصدیق کریں کہ تمام اشیاء آپ کے پیکیج میں موجود ہیں:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- تھرمل پیڈ
- صارف دستی (یہ دستاویز)
3. وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل | M.2 SATA/NVME Enclosure |
| انٹرفیس | USB 3.2 Gen 2 Type-C |
| ڈیٹا کی منتقلی کی شرح | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| تعاون یافتہ SSD اقسام | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| تعاون یافتہ SSD سائز | 2230، 2242، 2260، 2280 |
| زیادہ سے زیادہ صلاحیت | 4 ٹی بی |
| چپ سیٹ | RTL9210B (Supports UASP, Trim) |
| مواد | ایلومینیم کھوٹ |
| طول و عرض | تقریباً 4.92 x 2.83 x 0.67 انچ |
| وزن | تقریباً 60 گرام (2.12 اونس) |
| OS مطابقت | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| ڈیوائس کی مطابقت | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. سیٹ اپ گائیڈ
4.1 SSD انسٹالیشن
اپنے M.2 SSD کو انکلوژر میں انسٹال کرنے کے لیے ان اقدامات پر عمل کریں:
- انکلوژر کھولیں: Push the switch on the side of the enclosure and slide out the inner frame.
- SSD داخل کریں: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- محفوظ ایس ایس ڈی: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- تھرمل پیڈ لگائیں: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- بند کریں: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.

4.2 ڈیوائس سے جڑنا
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.

نوٹ: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. آپریٹنگ ہدایات
5.1 ڈیٹا کی منتقلی
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files، یا اپنے سسٹم کا استعمال کریں۔ file management tools to transfer data.
- NVMe SSD: Supports transfer rates up to 10Gbps.
- SATA SSD: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.

5.2 SSD مطابقت
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- سائز: 2230, 2242, 2260, and 2280 form factors.

6 دیکھ بھال
6.1 حرارت کی کھپت
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.

6.2 صفائی
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7 خرابیوں کا سراغ لگانا
- Enclosure not detected:
- یقینی بنائیں کہ SSD صحیح طریقے سے نصب ہے اور دیوار کے اندر محفوظ ہے۔
- Try connecting the enclosure to a different USB port on your device.
- اگر دستیاب ہو تو مختلف USB کیبل سے ٹیسٹ کریں۔
- Verify that the SSD itself is functional by testing it in another compatible device if possible.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- سست منتقلی کی رفتار:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Close other applications that might be consuming system resources or disk I/O.
- Check the health of your SSD.
- دیوار گرم ہو جاتی ہے:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8 آفیشل پروڈکٹ ویڈیوز
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. وارنٹی کی معلومات
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. سپورٹ
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webسائٹ یا مصنوعات کی پیکیجنگ پر۔