ہدایت نامہ

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the IXITAB KWS-AC301/KWS-AC300 Digital AC Power Energy Meter. This device is designed to accurately measure and display AC voltage, current, active power, energy (kWh), and temperature. It is suitable for monitoring electrical parameters in various AC circuits.

2. حفاظتی معلومات

انتباہ: Electrical shock hazard. Installation and servicing should only be performed by qualified personnel. Failure to follow these instructions may result in serious injury or death.

• Ensure the power supply is disconnected before installation or wiring.
• مخصوص والیوم سے تجاوز نہ کریں۔tage and current ratings (AC 50-300V, 100A).
• آلے کو گیلے یا ڈی میں نہ چلائیں۔amp حالات
• آلے کو آتش گیر مواد سے دور رکھیں۔
• پاور لگانے سے پہلے تصدیق کریں کہ تمام کنکشن محفوظ اور درست ہیں۔

3. پروڈکٹ ختمview

The KWS-AC301/KWS-AC300 meter features a clear digital display for simultaneous monitoring of multiple electrical parameters. It is compact and designed for easy integration into electrical panels or systems.

Figure 3.1: Product image placeholder. This image indicates that a specific product image is not available. The actual product is a compact digital meter designed for AC electrical measurements.

اہم خصوصیات میں شامل ہیں:

• Real-time measurement of AC Voltage (V), Current (A), Active Power (W), and Energy (kWh).
• درجہ حرارت کا ڈسپلے۔
• High accuracy and stability.
• پڑھنے میں آسان ڈیجیٹل ڈسپلے۔

4. سیٹ اپ اور وائرنگ

آگے بڑھنے سے پہلے، یقینی بنائیں کہ مین پاور سپلائی بند ہے۔

1. چڑھنا: Choose a suitable location for the meter, typically within an electrical panel or enclosure, ensuring adequate ventilation.
2. والیومtage Input (L/N): AC والیوم کو جوڑیں۔tage input wires to the designated L (Live) and N (Neutral) terminals on the meter. Ensure the voltage 50-300V AC رینج کے اندر ہے۔
3. موجودہ ٹرانسفارمر (CT) کنکشن:
   • Pass the load wire (the wire carrying the current you wish to measure) through the hole of the external current transformer (CT).
   • Connect the two small wires from the CT to the dedicated CT input terminals on the meter. Pay attention to polarity if indicated, though many simple CTs are non-polar for measurement.
4. لوڈ کنکشن: Ensure the load is correctly connected to the circuit being monitored.
5. پاور آن: After all connections are verified and secure, restore power to the circuit. The meter should power on and display readings.

Note: The CT must be connected before applying power to the meter to avoid damage. Do not disconnect the CT while power is applied to the meter.

5. آپریٹنگ ہدایات

Once powered on, the KWS-AC301/KWS-AC300 meter will automatically begin displaying the measured parameters. The display typically cycles through or shows simultaneously:

• والیومtage (V): Displays the current AC voltage.
• موجودہ (A): Displays the current AC amperage flowing through the monitored circuit.
• فعال طاقت (W): Displays the instantaneous active power consumed by the load.
• Energy (kWh): Accumulates the total energy consumed over time. This value is typically non-volatile and retained even after power loss.
• درجہ حرارت (°C/°F): Displays the ambient temperature measured by the device.

Some models may include a button for resetting the energy (kWh) reading. If present, press and hold the button for approximately 5 seconds to clear the accumulated energy data. Refer to specific product markings for button functionality.

6 دیکھ بھال

The KWS-AC301/KWS-AC300 meter requires minimal maintenance.

• صفائی: ڈسپلے کو صاف کرنے کے لیے نرم، خشک کپڑا استعمال کریں اور casinجی کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• معائنہ: وقفے وقفے سے وائرنگ کنکشنز کا معائنہ کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ محفوظ ہیں۔
• ذخیرہ: If storing the device for an extended period, keep it in a dry, cool environment, away from direct sunlight and extreme temperatures.

7 خرابیوں کا سراغ لگانا

8. وضاحتیں

9. وارنٹی اور سپورٹ

This product is manufactured by IXITAB. For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased. Please have your purchase details and product model number (KWS-AC301/KWS-AC300) ready when contacting support.

For further assistance, you may refer to the product listing on Amazon.com.