1. تعارف اور حفاظتی معلومات
Thank you for choosing the Wolf 25.4CC Petrol Chainsaw. This manual provides essential information for the safe and effective operation, maintenance, and care of your chainsaw. Please read and understand all instructions before operating the machine. Keep this manual for future reference.
1.1 عمومی حفاظتی انتباہات
- ہمیشہ مناسب ذاتی حفاظتی سامان (پی پی ای) پہنیں including a safety helmet, eye protection, hearing protection, heavy-duty gloves, safety trousers, and safety boots.
- Never operate the chainsaw when fatigued, under the influence of alcohol, drugs, or medication.
- Keep children, bystanders, and animals at a safe distance (at least 10 meters) from the work area.
- Inspect the chainsaw before each use for loose parts, damage, or wear. Do not operate a damaged chainsaw.
- مناسب وینٹیلیشن کو یقینی بنائیں when operating the chainsaw, as exhaust fumes are toxic.
- Handle fuel with extreme care. Fuel is highly flammable. Refuel in a well-ventilated area with the engine off and cool.
- Be aware of kickback. Kickback can occur when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut.
2. پروڈکٹ ختمview
The Wolf 25.4CC Petrol Chainsaw is designed for domestic tree pruning and cutting tasks. It features a lightweight design and a powerful 0.8KW engine.
2.1 شامل اجزاء
- 1 x Wolf 25.4CC Petrol Chainsaw unit
- گائیڈ بار
- سو چین
- گائیڈ بار کور
- ٹول کٹ
- فیول مکسنگ بوتل
Image 1: The Wolf 25.4CC Petrol Chainsaw, accompanied by a fuel mixing bottle and a toolkit, as typically included in the package.
تصویر 2: سائیڈ view of the Wolf 25.4CC Petrol Chainsaw, showing the assembled guide bar and saw chain.
3. سیٹ اپ اور اسمبلی
3.1 Assembling the Guide Bar and Chain
- Ensure the engine is off and the spark plug cap is disconnected for safety.
- دونوں گری دار میوے کو ڈھیلا کرکے چین بریک کور کو ہٹا دیں۔
- Place the guide bar onto the studs, ensuring the chain tension pin aligns with the hole in the guide bar.
- Carefully fit the saw chain around the sprocket and into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction.
- چین بریک کور کو تبدیل کریں اور گری دار میوے کو ہاتھ سے سخت کریں۔
- Adjust the chain tension using the tensioning screw. The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the guide bar.
- Fully tighten the nuts to secure the chain brake cover and guide bar.
3.2 Fueling the Chainsaw
This chainsaw uses a 2-stroke petrol engine and requires a specific fuel mixture. Never use pure petrol.
- ایندھن کی قسم: Use unleaded petrol with an octane rating of 90 or higher.
- تیل کی قسم: خاص طور پر ایئر کولڈ انجنوں کے لیے ڈیزائن کیا گیا اعلیٰ معیار کا 2-اسٹروک انجن آئل استعمال کریں۔
- اختلاط کا تناسب: Refer to the chainsaw's label or manufacturer's recommendation for the exact petrol-to-oil ratio (e.g., 25:1 or 50:1). Use the provided fuel mixing bottle for accurate measurement.
- طریقہ کار: Mix the fuel and oil thoroughly in a separate, approved fuel container. Pour the mixture into the chainsaw's fuel tank. Do not overfill.
- چین کا تیل: Fill the chain oil reservoir with good quality chain lubricant. This is crucial for chain and bar longevity.
4. Chainsaw آپریٹنگ
4.1 انجن شروع کرنا
- Place the chainsaw on a firm, flat surface. Ensure the chain brake is engaged (pushed forward).
- Set the choke lever to the 'closed' (cold start) position.
- پرائمر بلب کو کئی بار دبائیں جب تک کہ ایندھن نظر نہ آئے۔
- Pull the starter cord firmly and steadily until the engine fires briefly (usually 1-3 pulls).
- Once it fires, move the choke lever to the 'open' (run) position.
- سٹارٹر کی ہڈی کو دوبارہ کھینچیں جب تک کہ انجن شروع نہ ہو اور آسانی سے چلتا ہو۔
- Allow the engine to warm up for a few moments.
- Disengage the chain brake (pull back towards the handle) before cutting.
4.2 Cutting Techniques and Safety
- Maintain a firm grip on both handles with both hands.
- Stand with good balance and a wide stance.
- Avoid cutting with the tip of the guide bar to prevent kickback.
- Always be aware of falling branches and the direction of the cut.
- کندھے کی اونچائی سے اوپر نہ کاٹیں۔
- Clear the work area of obstacles and debris.
- چینسا کو کبھی بھی ایک ہاتھ سے نہ چلائیں۔
5 دیکھ بھال
باقاعدگی سے دیکھ بھال بہترین کارکردگی کو یقینی بناتی ہے اور آپ کے چینسا کی زندگی کو بڑھاتی ہے۔
5.1 روزانہ دیکھ بھال
- ایئر فلٹر کو صاف کریں: Remove and clean the air filter. Replace if damaged.
- Check chain tension: اگر ضروری ہو تو ایڈجسٹ کریں۔
- Inspect guide bar: Check for wear, burrs, and ensure the oil hole is clear.
- Sharpen chain: A sharp chain cuts efficiently and safely. Use a round file of the correct diameter for your chain.
- Clean the chainsaw: Remove sawdust and debris from the engine fins and chain brake mechanism.
5.2 متواتر دیکھ بھال
- چنگاری پلگ: چنگاری پلگ کا معائنہ اور صاف کریں۔ اگر پہنا ہوا ہو یا خراب ہو تو بدل دیں۔
- ایندھن فلٹر: Check and replace the fuel filter if clogged.
- کاربوریٹر ایڈجسٹمنٹ: If the engine runs poorly, consult a qualified service technician.
5.3 اسٹوریج
- Empty the fuel tank and run the engine until it stops to clear the carburetor.
- چینسا کو اچھی طرح صاف کریں۔
- Apply a light coat of oil to the guide bar and chain to prevent rust.
- Store the chainsaw in a dry, well-ventilated area, out of reach of children.
6 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| انجن شروع نہیں ہوتا | No fuel, incorrect choke setting, fouled spark plug, flooded engine | Check fuel level, adjust choke, clean/replace spark plug, clear flooded engine (refer to manual) |
| انجن خراب چلتا ہے / طاقت کی کمی ہے۔ | Dirty air filter, incorrect fuel mixture, dull chain, carburetor needs adjustment | Clean air filter, use correct fuel mixture, sharpen chain, consult service technician |
| زنجیر نہیں ہلتی | چین بریک لگا ہوا، زنجیر کا غلط تناؤ، خراب کلچ | Disengage chain brake, adjust chain tension, consult service technician |
| ضرورت سے زیادہ کمپن | Loose components, damaged chain/bar | Check all fasteners, inspect chain and bar for damage, replace if necessary |
7. وضاحتیں
- ماڈل: W25.4CC
- انجن کی نقل مکانی: 25.4CC
- شرح پیداوار: 0.8KW
- طاقت کا منبع: Fuel Powered (Petrol)
- پروڈکٹ کے طول و عرض (L x W x H): 30 سینٹی میٹر x 60 سینٹی میٹر x 23.5 سینٹی میٹر
- وزن (تقریباً): 4.5 kg (Package weight)
- بلیڈ مواد: مرکب سٹیل
- رنگ: سرخ/پیلا
- خصوصی خصوصیت: ہلکا پھلکا
8. وارنٹی اور سپورٹ
Wolf products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or spare parts inquiries, please contact the authorized Wolf service center in your region. Keep your proof of purchase for any warranty claims.
Image 3: The official Wolf Garten logo.