1. تعارف
The Ortis Hi-Lo Sump Pump Switch Controller KJ-033 is an electronic adjustable float switch designed for automatic water level management in various applications such as sewage pits, fish tanks, and water tanks. It features stainless steel anti-corrosion dual sensors and supports both 220V and 110V AC power inputs. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. حفاظتی معلومات
براہ کرم تنصیب اور آپریشن سے پہلے تمام حفاظتی ہدایات کو احتیاط سے پڑھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں بجلی کا جھٹکا لگ سکتا ہے، آگ لگ سکتی ہے یا شدید چوٹ لگ سکتی ہے۔
- برقی خطرہ: اس بات کو یقینی بنائیں کہ کسی بھی تنصیب، دیکھ بھال، یا خرابیوں کا سراغ لگانے سے پہلے بجلی کی فراہمی منقطع ہے۔
- والیومtagای مطابقت: تصدیق کریں کہ پاور سپلائی والیومtage matches the controller's specifications (220V/110V AC).
- مناسب گراؤنڈنگ: Always connect the device to a properly grounded outlet.
- پانی کی نمائش: Do not immerse the controller unit in water. The controller unit is designed to be mounted above the water level.
- قابل عملہ: Installation and electrical connections should be performed by qualified personnel if you are unsure.
- ماحولیاتی حالات: Do not operate the device in explosive atmospheres or where flammable liquids or gases are present.
3. مصنوعات کی خصوصیات
The Ortis KJ-033 controller offers several features for reliable water level management:
- Dual Stainless Steel Sensors: Anti-corrosion sensors for accurate water level detection.
- Adjustable Sensor Range: Sensors can be adjusted from 1/2 inch to 20 inches to define high and low water levels.
- ایک سے زیادہ آپریٹنگ طریقوں: Supports Drain Mode (for emptying) and Water Mode (for filling).
- ایل ای ڈی اشارے: Visual feedback for power, load status, and alarm conditions.
- اوورلوڈ تحفظ: Integrated protection for connected pumps.
- خاموش فنکشن: Allows silencing of the alarm.
- وسیع درخواست: Suitable for sewage pits, fish tanks, water tanks, and other water management systems.
تصویر 3.1: Ortis Water Level Controller Overview with Key Features.
تصویر 3.2: Various Application Scenarios for the Controller.
4. سیٹ اپ اور انسٹالیشن
Proper installation is crucial for the reliable operation of the controller.
4.1 Controller Mounting
The controller unit should be mounted in a dry location, above the maximum water level, and within reach of a grounded power outlet.
- سکرو ماؤنٹنگ: Use appropriate screws and anchors to secure the controller to a wall or stable surface through the mounting tabs.
- سکشن کپ بڑھتے ہوئے: For temporary or non-permanent installations, a suction cup can be used to attach the controller to a smooth, clean surface.
تصویر 4.1: Controller Installation Methods.
4.2 Sensor Installation and Adjustment
The dual sensors detect the high and low water levels. Their position determines the operating range of your pump.
- سینسر کی جگہ کا تعین: Position the sensors vertically in the water, ensuring they are securely fastened and will not move. The lower sensor defines the 'low' water level, and the upper sensor defines the 'high' water level.
- سایڈست رینج: The sensors can be adjusted along their cables to set the desired water level range, from 1/2 inch to 20 inches apart. Ensure both sensors are submerged at the desired 'on' level and the lower sensor is exposed at the desired 'off' level for drain mode, or vice versa for water mode.
- کیبل مینجمنٹ: Route sensor cables to prevent entanglement or damage.
تصویر 4.2: Adjustable Sensor Installation.
4.3 الیکٹریکل کنکشن
- پاور پلگ: Plug the controller's power cord into a grounded 220V or 110V AC outlet.
- پمپ کنکشن: Plug your sump pump or other load device into the outlet on the front of the controller. Ensure the pump's power requirements do not exceed the controller's output capacity (15A, up to 2HP).
تصویر 4.3: Example Sump Pit Installation.
5. آپریٹنگ ہدایات
The controller features a simple interface for selecting operating modes and managing alarms.
تصویر 5.1: کنٹرول پینل ختم۔view.
5.1 موڈ کا انتخاب
Use the 'Drain' and 'Water' buttons to select the desired operating mode:
- ڈرین موڈ: (LED indicator 'Drain' illuminates) In this mode, the controller activates the pump when the water level reaches the upper (high) sensor and deactivates it when the water level drops below the lower (low) sensor. This mode is typically used for emptying sewage pits or sumps.
- واٹر موڈ: (LED indicator 'Water' illuminates) In this mode, the controller activates the pump when the water level drops below the lower (low) sensor and deactivates it when the water level reaches the upper (high) sensor. This mode is typically used for replenishing water in fish tanks or water tanks.
5.2 Power and Operation Switch
The main switch controls the power and operational state of the connected load:
- آٹو: (LED indicator 'AUTO' illuminates) The controller operates automatically based on the selected mode (Drain or Water) and sensor readings.
- بند: (LED indicator 'OFF' illuminates) The connected pump is turned off, regardless of water levels.
- آن: (LED indicator 'ON' illuminates) The connected pump is continuously turned on, regardless of water levels. Use this for manual override or continuous operation.
5.3 خاموش فنکشن
Press the 'Mute' button to silence any active alarms. The 'DisAlarm' LED will illuminate when the alarm is muted.
تصویر 5.2: Operational Logic in Drain Mode (Sewage Pit Exampلی).
6 دیکھ بھال
Regular maintenance ensures the longevity and reliable operation of your Ortis controller.
- سینسر کی صفائی: Periodically inspect and clean the stainless steel sensors to remove any buildup of debris, algae, or mineral deposits that could affect their accuracy. Disconnect power before cleaning.
- کیبل معائنہ: Check all cables and connections for signs of wear, damage, or corrosion. Replace any damaged components immediately.
- کنٹرولر یونٹ: Keep the controller unit clean and dry. Avoid exposing it to direct sunlight or extreme temperatures.
- ٹیسٹ آپریشن: Periodically test the controller's operation by manually raising or lowering water levels to ensure the pump activates and deactivates as expected in the selected mode.
7 خرابیوں کا سراغ لگانا
عام مسائل اور ان کے حل کے لیے نیچے دیے گئے جدول کو دیکھیں۔
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| Pump does not turn on/off automatically. | 1. Controller not in AUTO mode. 2. Sensors are dirty or improperly positioned. 3. Pump is not plugged in or is faulty. | 1. Ensure the switch is set to 'AUTO'. 2. Clean sensors and verify their high/low positions. 3. Check pump connection and functionality. |
| الارم کثرت سے بجتا ہے۔ | 1. Water level not reaching desired sensor within expected time. 2. سینسر کی خرابی 3. Alarm sensitivity setting (if applicable, check product documentation). | 1. Check pump operation and water flow. Adjust sensor positions if needed. 2. Inspect sensors for damage or debris. Replace if faulty. 3. Use the 'Mute' button temporarily. Consult manufacturer for alarm logic details. |
| کنٹرولر کے پاس کوئی طاقت نہیں ہے۔ | 1. پاور کورڈ ان پلگ۔ 2. آؤٹ لیٹ میں کوئی طاقت نہیں ہے۔ 3. اندرونی فیوز اڑا دیا گیا۔ | 1. Ensure power cord is securely plugged in. 2. Test the outlet with another device. Check circuit breaker. 3. مدد کے لیے کسٹمر سپورٹ سے رابطہ کریں۔ |
| Pump runs continuously in AUTO mode. | 1. Sensor stuck in 'on' position (e.g., upper sensor always wet in Drain Mode). 2. Controller malfunction. | 1. Clean and reposition sensors. Ensure they can freely detect water level changes. 2. Disconnect power and reconnect. If issue persists, contact support. |
8. وضاحتیں
تصویر 8.1: Controller Dimensions.
| فیچر | تفصیلات |
|---|---|
| ماڈل | KJ-033 |
| برانڈ | اورٹیس |
| ان پٹ جلدtage | 220V / 110V AC |
| آؤٹ پٹ کرنٹ | 15A |
| زیادہ سے زیادہ لوڈ پاور | 2 HP تک |
| سینسر مواد | سٹینلیس سٹیل |
| Adjustable Sensor Range | 1/2 انچ سے 20 انچ |
| کارخانہ دار | FJKJ INC. |
9. وارنٹی اور سپورٹ
For warranty information and technical support, please refer to the product packaging or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.
مینوفیکچرر: FJKJ INC.