Winees WiFi Water Leak Detector S1 Lite Instruction Manual

1. پروڈکٹ ختمview

The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.

Image: Winees S1 Lite Water Leak Detector Hub and Sensor.

• ریموٹ مانیٹرنگ: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
• Wide Transmission Range: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
• فوری اطلاعات: Receive alerts via the app, email, and SMS when a water leak is detected.
• سایڈست الارم: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
• Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
• IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.

2. باکس میں کیا ہے۔

Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:

• 1 x Wi-Fi Hub
• 1 x Water Leak Sensor
• 1 x CR2450 Battery (pre-installed in sensor)
• 1 x Battery Cover Tool
• 1 ایکس کوئیک اسٹارٹ گائیڈ

Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.

3. سیٹ اپ ہدایات

3.1 Download the AiDot App

1. تلاش کریں۔ "AiDot" in your smartphone's app store (iOS or Android).
2. ایپلیکیشن ڈاؤن لوڈ اور انسٹال کریں۔
3. Create an account and follow the in-app instructions to confirm your email.

3.2 Activate the Sensor Battery

Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. Remove the plastic insulation tab covering the CR2450 battery.
3. بیٹری کور کو تبدیل کریں، اس بات کو یقینی بناتے ہوئے کہ یہ محفوظ طریقے سے بند ہے۔

Image: Activating the sensor battery by removing the plastic tab.

3.3 Plug in the Wi-Fi Hub

Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.

3.4 Add Devices to the App

The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:

1. Open the AiDot app and navigate to "My Home".
2. Tap "Add Device" or the '+' icon.
3. Scan the QR code located on the back of each sensor.
4. Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.

Image: Direct pre-pairing between the hub and sensor for simplified setup.

4. آپریٹنگ ہدایات

4.1 سینسر کی جگہ کا تعین

Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:

• سنک کے نیچے (باورچی خانہ، باتھ روم)
• Near washing machines or dishwashers
• In basements or utility rooms
• Near water heaters or sump pumps

Image: The 1.8mm thin sensor can be placed discreetly in any corner.

Image: Connect multiple sensors throughout your home for comprehensive coverage.

4.2 الرٹس وصول کرنا

When a water leak is detected, the system will trigger multiple alert modes:

• سمعی الارم: The hub will sound a 100dB alarm.
• ایپ کی اطلاعات: Receive instant push notifications on your smartphone via the AiDot app.
• Email & SMS: Configured email addresses and phone numbers will receive alerts.

Image: Multiple notification methods ensure you are always informed of a leak.

4.3 الارم کنٹرول

• حجم کو ایڈجسٹ کریں: The hub has buttons to adjust the alarm volume (high/medium/low).
• الارم خاموش کریں: Press any button on the hub or use the AiDot app to instantly mute the alarm.
• الارم کا دورانیہ: Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.

Image: Adjustable volume settings for the hub alarm.

Image: One-key function to turn off the alarm.

4.4 آفیشل پروڈکٹ ویڈیو

Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.

5 دیکھ بھال

5.1 بیٹری کی تبدیلی

The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. پرانی CR2450 بیٹری کو ہٹا دیں۔
3. ایک نئی CR2450 بیٹری داخل کریں جس کا مثبت (+) رخ اوپر ہو۔
4. بیٹری کور کو تبدیل کریں، اس بات کو یقینی بناتے ہوئے کہ یہ محفوظ طریقے سے بند ہے۔

6 خرابیوں کا سراغ لگانا

If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:

• کوئی انتباہات نہیں: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
• غلط الارم: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
• رابطے کے مسائل: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
• سینسر جواب نہیں دے رہا ہے: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.

For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.

7. وضاحتیں

8. وارنٹی اور سپورٹ

Winees is committed to providing high-quality products and customer satisfaction.

• 30 دن کی واپسی کی پالیسی: Enjoy a 30-day return window with no questions asked.
• 24-Month Unconditional Replacement: Products are eligible for unconditional replacement within 24 months of purchase.
• لائف ٹائم وارنٹی: Winees provides permanent service and technical support for its products.
• 24 گھنٹے فوری جواب: 24 گھنٹوں کے اندر اپنی پوچھ گچھ کے فوری جواب کی توقع کریں۔

For support, please visit the official Winees webسائٹ یا ان کی کسٹمر سروس ٹیم سے براہ راست رابطہ کریں۔