TONSTAD Cabinet with Doors (82x47x90 cm, Oak Veneer)

تعارف

This instruction manual provides important information for the safe assembly, operation, and maintenance of your new TONSTAD cabinet with doors. Please read this manual thoroughly before beginning assembly and keep it for future reference. The TONSTAD series furniture is designed for versatile use, either as a standalone piece or combined with other items from the series.

اہم حفاظتی معلومات

• دو رکنی اسمبلی: For safety and ease, it is recommended that two adults assemble this cabinet.
• وزن کی حد: Do not exceed the maximum load of 22 kg per shelf. Overloading can cause the cabinet to become unstable or damage the shelves.
• وال اینکرنگ: To prevent tip-over accidents, it is strongly recommended to secure the cabinet to the wall using appropriate wall anchoring devices. Wall materials vary, so screws for wall attachment are not included. Consult a professional if you are unsure about the type of fastening device to use for your walls.
• آلے کا استعمال: Use only the recommended tools and follow all instructions carefully. Incorrect assembly can lead to injury or damage to the product.
• جگہ کا تعین: Place the cabinet on a level, stable surface to ensure stability.

حصوں کی فہرست

Before beginning assembly, unpack all components and verify that all parts are present and undamaged. Refer to the diagram below for a visual representation of the cabinet's dimensions and main components.

Figure 1: Cabinet Dimensions. This diagram illustrates the overall width, height, and depth of the TONSTAD cabinet, along with internal measurements for door and shelf placement.

While a detailed hardware list is typically included with the product packaging, common components for this type of cabinet include:

• سائیڈ پینلز (2)
• ٹاپ پینل (1)
• نیچے کا پینل (1)
• بیک پینل (1)
• دروازے (2)
• سایڈست شیلف (1)
• Hinges and Mounting Hardware
• دروازے کے ہینڈل / نوبس
• Assembly Screws, Dowels, and Cam Locks
• Wall Anchoring Hardware (Note: Wall screws not included, choose according to wall material)

اسمبلی کی ہدایات

اوزار کی ضرورت ہے:

• فلپس ہیڈ سکریو ڈرایور
• ہتھوڑا (ڈاؤلز اور بیک پینل کیلوں کے لیے)
• ماپنے والا ٹیپ
• سطح
• Drill (for wall anchoring, if applicable)

مرحلہ وار اسمبلی:

1. ورک اسپیس تیار کریں: ایک کشادہ جگہ صاف کریں اور خروںچ کو روکنے کے لیے تمام حصوں کو نرم، صاف سطح پر رکھیں۔
2. بیس فریم کو جمع کریں: Attach the side panels to the bottom panel using the provided screws and dowels. Ensure cam locks are tightened securely.
3. ٹاپ پینل منسلک کریں: Secure the top panel to the side panels using the appropriate hardware.
4. بیک پینل انسٹال کریں: Slide or nail the back panel into the grooves or onto the back of the assembled frame. Ensure it is square to add stability.
5. Insert Shelf Supports and Shelf: Place the shelf supports at the desired height. Insert the adjustable shelf onto the supports.
6. Attach Hinges to Doors: Mount the hinges to the doors according to the pre-drilled holes.
7. کابینہ کے دروازے ماؤنٹ کریں: Attach the doors to the cabinet frame using the hinges. Adjust the hinges to ensure proper door alignment and gap.
8. Install Door Handles/Knobs: Secure the handles or knobs to the doors.
9. Position and Anchor: Carefully move the assembled cabinet to its final desired location. Use a level to ensure it stands evenly. Crucially, secure the cabinet to the wall using appropriate wall anchoring hardware to prevent tip-over.

Figure 2: Cabinet Interior. This image shows the inside of the cabinet, highlighting the adjustable shelf and the hinge mechanism for the doors.

آپریٹنگ ہدایات

The TONSTAD cabinet is designed for general storage and display. To operate:

• دروازے کھولنا / بند کرنا: Gently pull the door handles to open the doors. Push them closed until they are flush with the cabinet frame.
• شیلف کو ایڈجسٹ کرنا: The cabinet includes one adjustable shelf. To change its height, carefully remove any items, lift the shelf, reposition the shelf supports to the desired holes, and then place the shelf back onto the supports.
• تجویز کردہ استعمال: This cabinet is suitable for storing decorative items, collectibles, documents, and other valuables. Ensure items are distributed evenly on the shelf and do not exceed the maximum weight limit.

دیکھ بھال اور دیکھ بھال

Proper care will extend the life and appearance of your TONSTAD cabinet.

• صفائی: اشتہار کے ساتھ صاف کریں۔amp cloth and a mild cleaner. Dry immediately with a clean cloth.
• سخت کیمیکلز سے بچیں: Do not use abrasive cleaners, strong solvents, or polishes that may damage the oak veneer finish.
• ہارڈ ویئر چیک: Periodically check all assembly fittings and retighten them if necessary to ensure the cabinet remains stable.
• ماحولیاتی حالات: Avoid placing the cabinet in direct sunlight or near heat sources, as this can cause the wood veneer to fade or warp. Maintain a stable room temperature and humidity.

Figure 3: Oak Veneer Detail. This close-up highlights the natural wood grain and finish of the cabinet, emphasizing the material for care instructions.

خرابی کا سراغ لگانا

مصنوعات کی وضاحتیں

Figure 4: Assembled TONSTAD Cabinet. This image displays the fully assembled cabinet in a typical home environment, showcasing اس کا ڈیزائن اور فعالیت۔

وارنٹی اور سپورٹ

For information regarding warranty coverage, replacement parts, or technical support, please refer to the documentation included with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.