Firecore HV-5G 5-Line Green Laser Level Instruction Manual

1. پروڈکٹ ختمview

The Firecore HV-5G is a high-precision 5-line green laser level designed for various construction, DIY, and measurement tasks. It features advanced technology for accuracy, durability, and ease of use.

Image: Firecore HV-5G Green Laser Level in operation, projecting clear green lines for precise alignment.

اہم خصوصیات:

• High Visibility Green Laser: Equipped with a 520nm direct green laser diode unit, offering superior visibility indoors and reduced eye strain during prolonged use.
• Durable and Shock-Resistant: The main unit features an IP54 dustproof and waterproof design, ensuring reliable performance in harsh work environments. Its robust internal structure, supported by three high-quality aluminum aviation bases, allows it to withstand 1-meter drops and impacts.
• Line Fixing Mode & Automatic Correction: Utilizes a magnetic damping system for stable and temperature-resistant operation. In line fixing mode, the laser projects non-blinking lines for inclined applications like stair handrail installation. When unlocked, the device automatically corrects itself within ±3°. If tilted beyond this range, the laser lines will blink as a warning. Laser safety standard: Class 2, Output: Less than 1mW.
• Pulse Mode Capability: Easily switch to pulse mode for use with a dedicated laser receiver (sold separately), extending the detection range up to 50-60 meters for outdoor work.
• 5-Line Configuration: Provides four horizontal lines and one vertical line, including a ground point, allowing for comprehensive 360-degree alignment without repositioning the unit.
• توسیعی آپریشن: Powered by 4 alkaline batteries, offering approximately 10 hours of continuous operation when all lines are projected, enhancing work efficiency.

2. سیٹ اپ

2.1 بیٹری کی تنصیب

Before initial use, ensure the battery is correctly installed. The Firecore HV-5G can use either the provided rechargeable lithium-ion battery pack or 4 AA alkaline batteries (sold separately).

1. یونٹ کے پچھلے حصے میں بیٹری کے ٹوکرے کو تلاش کریں۔
2. Ensure the locking knob is in the "open" position (unlocked).
3. Insert the battery pack or 4 AA alkaline batteries, observing the correct polarity (+/-).
4. Close the battery compartment and turn the locking knob to the "closed" position (locked) to secure the battery.

2.2 آلہ بڑھتے ہوئے

The HV-5G can be placed on a flat surface or mounted on a tripod for stable operation.

• For tripod mounting, screw the device onto a compatible tripod using the threaded mount at the bottom.
• Ensure the tripod is stable and on a level surface to facilitate accurate self-leveling.

3. آپریٹنگ ہدایات

3.1 پاور آن/آف اور موڈ کا انتخاب

To power on the device, slide the main switch to the "ON" position. The device will automatically enter self-leveling mode. To power off, slide the switch to "OFF".

Image: The Firecore HV-5G Laser Level showing its main body and control panel.

• سیلف لیولنگ موڈ: When powered on, the device automatically levels itself within ±3°. If the tilt exceeds this range, the laser lines will blink to indicate an out-of-level condition.
• Line Fixing (Manual) Mode: To project inclined lines, press and hold the mode button (often indicated by a padlock icon or 'M') for a few seconds until the laser lines stop blinking and remain solid. This disables the self-leveling function.
• پلس موڈ: For outdoor use or when using a laser receiver, activate pulse mode by pressing the dedicated pulse mode button. This enhances the laser's visibility for the receiver.
• Line Selection: Press the horizontal (H) or vertical (V) buttons to toggle specific laser lines on or off, allowing you to customize the projection based on your task.

3.2 عمدہ ایڈجسٹمنٹ

The 360° fine-tuning knob allows for precise adjustments of the laser lines without moving the entire unit, ensuring accurate alignment.

Image: The Firecore HV-5G laser level showing the 360-degree fine adjustment knob at the base, used for precise alignment of laser lines.

• Rotate the fine-tuning knob clockwise or counter-clockwise to make small, precise adjustments to the horizontal or vertical laser lines.

4 دیکھ بھال

• Keep the laser level clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• طویل عرصے تک آلہ کو انتہائی درجہ حرارت یا براہ راست سورج کی روشنی کے سامنے لانے سے گریز کریں۔
• نقصان کو روکنے کے لیے جب استعمال میں نہ ہو تو آلہ کو اس کے حفاظتی کیس میں اسٹور کریں۔
• Remove batteries if the device will not be used for a long period to prevent leakage.

5 خرابیوں کا سراغ لگانا

عام مسائل اور حل:

• Laser lines are blinking:
  • In self-leveling mode, this indicates the device is tilted beyond its ±3° auto-correction range. Adjust the device's position until the lines become solid.
  • Ensure the main switch is fully in the "ON" position.
• کوئی لیزر لائنیں نہیں:
  • Check if the device is powered on and the battery is charged or correctly installed.
  • Ensure the selected lines (H/V) are activated.
• لیزر لائنیں مدھم ہیں:
  • Check battery level; low battery can affect laser brightness.
  • Ensure you are not in pulse mode without a receiver, as lines may appear dimmer to the naked eye.

6. وضاحتیں

7. وارنٹی اور سپورٹ

For warranty information, technical support, or service inquiries, please refer to the official product documentation included with your purchase or contact Firecore customer service directly.

کسی بھی وارنٹی دعووں کے لیے براہ کرم اپنے خریداری کا ثبوت اپنے پاس رکھیں۔