Reliablit Satin Nickel Electronic Deadbolt with Keypad & Passage Door Handle User Manual

تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Reliablit Satin Nickel Electronic Deadbolt with Keypad and Passage Door Handle. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

تصویر: سامنے view of the Reliablit electronic deadbolt and the accompanying passage door handle in satin nickel finish.

حفاظتی معلومات

• تنصیب کے دوران ہمیشہ مقامی بلڈنگ کوڈز اور ضوابط پر عمل کریں۔
• Do not use abrasive cleaners or solvents on the lock's finish. Use a soft, damp صفائی کے لئے کپڑا.
• Ensure batteries are inserted with correct polarity. Replace all batteries at the same time.
• چابیاں تالا سے دور کسی محفوظ جگہ پر رکھیں۔
• Avoid exposing the electronic components to excessive moisture or extreme temperatures.

پیکیج کے مشمولات

Before beginning installation, verify that all parts are present:

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Passage Door Handle Assembly
• ڈیڈبولٹ لیچ
• ہڑتال کی پلیٹ
• بڑھتے ہوئے پیچ
• Keys (for deadbolt)
• صارف دستی
• 1 x 9V Battery (may be included or sold separately, check packaging)
• Screwdriver (may be included or sold separately, check packaging)

سیٹ اپ اور انسٹالیشن

The Reliablit electronic deadbolt and passage handle are designed for easy installation, typically requiring only a screwdriver. Ensure your door thickness is between 1-3/8 inches and 1-3/4 inches.

1. دروازہ تیار کریں۔

Ensure the door is properly prepped with standard bore holes for both the deadbolt and the passage handle. If replacing an existing lock, remove the old hardware.

2. Install the Deadbolt Latch

Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.

تصویر: کلوز اپ view of the electronic keypad deadbolt, showing the numerical buttons and keyhole.

3. Install the Exterior Keypad Assembly

Feed the cable from the exterior keypad through the cross bore hole. Align the keypad assembly with the deadbolt latch and secure it to the door.

تصویر: سائیڈ view of the electronic deadbolt and passage handle installed on a door, demonstrating how the components fit together.

4. Install the Interior Unit

Connect the cable from the exterior keypad to the interior unit. Mount the interior unit onto the door, ensuring the deadbolt spindle engages correctly with the latch mechanism. Secure with mounting screws.

5. بیٹریاں انسٹال کریں

Open the battery cover on the interior unit. Insert one 9V battery, ensuring correct polarity. Close the battery cover. The lock will perform a self-check.

6. Install Passage Door Handle

Follow the manufacturer's instructions for installing the passage door handle below the deadbolt. This typically involves inserting the spindle through the door and securing the interior and exterior levers.

تصویر: کلوز اپ view of the passage door handle in satin nickel finish.

آپریٹنگ ہدایات

بغیر چابی کے اندراج

To unlock the deadbolt using the keypad:

1. Enter your programmed user code (4-8 digits).
2. Press the "Lock/Unlock" button (often represented by a padlock icon).
3. The deadbolt will retract, allowing the door to be opened.

ون ٹچ لاکنگ

To lock the deadbolt from the outside:

• Simply press the "Lock/Unlock" button on the keypad. The deadbolt will extend.

دستی آپریشن

• باہر سے: Use the provided key to manually lock or unlock the deadbolt.
• اندر سے: Use the turn button on the interior unit to manually lock or unlock the deadbolt.

پروگرامنگ یوزر کوڈز

The lock supports up to 30 unique user codes. Refer to the specific programming instructions included with your lock for detailed steps on adding, deleting, or modifying user codes. This typically involves using a master code to enter programming mode.

دیکھ بھال

• بیٹری کی تبدیلی: The 9V battery typically lasts up to 3 years. Replace the battery when the low battery indicator activates (if applicable) or if the lock's operation becomes sluggish. Always replace with a new, high-quality 9V alkaline battery.
• صفائی: Clean the lock's exterior with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used. Avoid harsh chemicals, abrasive cleaners, or polishes as they can damage the finish and electronic components.
• چکنا: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the keypad or electronic components.

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی اور سپورٹ

RELIABILT provides a comprehensive warranty for this product:

• مکینیکل اور ختم وارنٹی: لائف ٹائم وارنٹی۔
• الیکٹرانکس وارنٹی: 1 سال کی وارنٹی۔

For full details regarding warranty coverage, terms, and conditions, please refer to the official RELIABILT warranty documentation or visit the RELIABILT website. For technical support, troubleshooting assistance, or warranty claims, please contact RELIABILT customer service directly.