1. تعارف
The Einhell TC-MT 150 E is a versatile grinding and engraving tool designed for a wide range of applications, including engraving, polishing, milling, grinding, cutting, and brushing. This tool features a 150 W motor and a 6-level electronic speed control, allowing for flexible adjustment of the rotational speed from 10,000 to 35,000 revolutions per minute (rpm) to suit various materials and tasks. The integrated spindle lock system facilitates quick and easy accessory changes. For detailed and intricate work, a 100 cm flexible shaft is included, equipped with a slim, soft-grip engraving tip for optimal handling and precise results. The device comes with a practical stand that provides storage for the flexible shaft and tip, as well as a tray for frequently used accessories. The stand can be wall-mounted or positioned stably on a workbench using its rubber feet. A cable winding device is integrated into the stand for neat storage. A comprehensive kit of 117 accessories is supplied, offering extensive possibilities for diverse applications.
2. حفاظتی ہدایات
Always observe the following safety precautions when operating the Einhell TC-MT 150 E tool:
- پورا دستی پڑھیں: Before use, thoroughly read and understand all instructions and safety warnings.
- ذاتی حفاظتی سامان (پی پی ای) پہنیں: Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling accessories and workpieces.
- محفوظ ورک پیس: یقینی بنائیں کہ ورک پیس مضبوطی سے cl ہے۔ampآپریشن کے دوران نقل و حرکت کو روکنے کے لیے ایڈ یا محفوظ۔
- کام کی جگہ کو صاف رکھیں: Keep your workspace tidy and well-lit. Cluttered or dark areas invite accidents.
- حادثاتی طور پر شروع ہونے سے بچیں: Ensure the switch is in the OFF position before plugging in the tool or changing accessories.
- Use correct accessories: Only use accessories designed for this tool and suitable for the task. Ensure accessories are correctly installed and tightened.
- حد سے تجاوز نہ کریں: ہر وقت مناسب فٹنگ اور توازن برقرار رکھیں۔
- بجلی منقطع کریں: Always unplug the tool from the power source before making any adjustments, changing accessories, or performing maintenance.
- محفوظ طریقے سے ذخیرہ کریں: When not in use, store the tool and accessories in a dry, secure place out of reach of children.
3. پیکیج کے مشمولات
تصدیق کریں کہ پیک کھولنے پر تمام اشیاء موجود ہیں:
- Einhell TC-MT 150 E Grinding and Engraving Tool
- Flexible Shaft (100 cm)
- ڈیوائس اسٹینڈ
- 117-piece Accessory Kit
- آپریٹنگ دستی
4. پروڈکٹ ختمview
Familiarize yourself with the main components of your Einhell TC-MT 150 E tool.
5. سیٹ اپ
- پیک کھولنا: Carefully remove all components from the packaging. Inspect for any damage. Keep packaging materials for future storage or transport.
- Positioning the Device Stand: Place the device stand on a stable, flat workbench. The rubber feet will help prevent slipping. Alternatively, the stand can be wall-mounted using appropriate fasteners (not included) through the designated holes.
- Attaching the Flexible Shaft:
- Ensure the main tool is unplugged.
- Press and hold the spindle lock button (Figure 4).
- Unscrew the collet nut from the main tool's spindle.
- Insert the inner drive cable of the flexible shaft into the main tool's spindle.
- Screw the flexible shaft's coupling nut onto the main tool's housing until secure. Do not overtighten.
- اسپنڈل لاک بٹن کو جاری کریں۔
- لوازمات داخل کرنا:
- یقینی بنائیں کہ ٹول ان پلگ ہے۔
- سپنڈل لاک بٹن کو دبائیں اور تھامیں۔
- Unscrew the collet nut on the main tool or the flexible shaft's handpiece.
- مطلوبہ لوازمات کی پنڈلی کولیٹ میں داخل کریں۔ یقینی بنائیں کہ پنڈلی پوری طرح سے بیٹھی ہے۔
- Tighten the collet nut firmly. Release the spindle lock button.
- اہم: Always use the correct collet size for the accessory shank. The kit includes various collets.
6. آپریٹنگ ہدایات
- پاور کنکشن: Plug the tool into a suitable power outlet (230 V AC).
- پاور آن/آف: Use the ON/OFF switch located on the main unit to start or stop the tool.
- رفتار کو ایڈجسٹ کرنا: Rotate the 6-level electronic speed control dial (Figure 3) to select the desired RPM. Start with a lower speed and gradually increase it as needed for the material and application. Refer to the accessory's recommendations for optimal speed settings.
- لچکدار شافٹ کا استعمال کرتے ہوئے: When using the flexible shaft, ensure it is not kinked or sharply bent during operation, as this can cause damage. Hold the handpiece firmly and guide the accessory smoothly over the workpiece.
- عام استعمال کی تجاویز:
- Apply light, consistent pressure. Excessive force can damage the tool, accessory, or workpiece.
- Move the tool continuously to prevent overheating the workpiece or accessory.
- For best results, practice on scrap material before working on your final project.
- ورک پیس سے رابطہ کرنے سے پہلے ٹول کو پوری رفتار تک پہنچنے دیں۔
7 دیکھ بھال
باقاعدگی سے دیکھ بھال آپ کے آلے کی لمبی عمر اور بہترین کارکردگی کو یقینی بناتی ہے۔
- صفائی: After each use, unplug the tool and clean the housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Use compressed air to clear dust from ventilation openings.
- لوازمات کی دیکھ بھال: Inspect accessories before and after each use for wear or damage. Replace worn or damaged accessories immediately. Store accessories in their designated compartments in the kit to prevent damage.
- لچکدار شافٹ: Periodically check the flexible shaft for any signs of wear or damage to the outer casing or inner cable. If damage is found, discontinue use and replace the shaft.
- کیبل معائنہ: Regularly inspect the power cable for cuts, fraying, or other damage. A damaged cable must be replaced by a qualified electrician.
8 خرابیوں کا سراغ لگانا
اگر آپ کو مسائل درپیش ہیں تو درج ذیل عام مسائل اور حل کا حوالہ دیں:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ٹول شروع نہیں ہوتا ہے۔ | No power supply; ON/OFF switch is off; Faulty power cable | Check power connection; Ensure switch is ON; Inspect power cable for damage. |
| Accessory wobbles or vibrates excessively | Accessory not properly inserted or tightened; Incorrect collet size; Damaged accessory | Re-insert and tighten accessory; Use correct collet; Replace damaged accessory. |
| ٹول زیادہ گرم ہوتا ہے۔ | Excessive pressure; Blocked ventilation slots; Continuous heavy use | Reduce pressure; Clean ventilation slots; Allow tool to cool down. |
| کم کارکردگی | Worn accessory; Incorrect speed setting; Motor issue | Replace accessory; Adjust speed; If problem persists, contact customer support. |
If you cannot resolve the issue using this guide, please contact Einhell customer support.
9. وضاحتیں
Technical data for the Einhell TC-MT 150 E Grinding and Engraving Tool:
| فیچر | تفصیلات |
|---|---|
| ماڈل نمبر | 4419380 |
| پاور ان پٹ | 150 ڈبلیو |
| والیومtage | 230 وولٹ (AC) |
| Max. No-Load Speed | 35,000 آر پی ایم |
| Min. No-Load Speed | 10,000 آر پی ایم |
| سپیڈ کنٹرول | 6-level electronic variator |
| لچکدار شافٹ کی لمبائی | 100 سینٹی میٹر |
| طول و عرض (L x W x H) | 30.1 x 22.7 x 13.4 سینٹی میٹر |
| وزن | 560 گرام |
| لوازمات شامل ہیں۔ | 117 ٹکڑوں کی کٹ |
| اصل ملک | چین |
10. وارنٹی اور سپورٹ
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact information can typically be found in the original packaging or on the Einhell brand webسائٹ
EU Spare Parts Availability: 1 سال