Ehaho Texas Flags for Whip Lights and Poles Instruction Manual

تعارف

This instruction manual provides essential information for the proper installation, use, and maintenance of your Ehaho Double Sided Texas Flags. These flags are designed for attachment to whip lights or antenna flag poles on various off-road vehicles such as UTVs, ATVs, Can-Am, Polaris RZR, and SXS models, as well as for marine and general outdoor use. Please read this manual thoroughly before installation and use.

مصنوعات کی خصوصیات

• پریمیم مواد: Constructed from high-quality nylon fabric for durability.
• Three-Layer Design: Features a three-layer fabric construction for enhanced strength and tear resistance.
• Double-Stitched Hem: Edges are double-stitched to prevent fraying and tearing, especially in strong winds.
• Strong Brass Grommets: Equipped with durable brass grommets for secure attachment.
• دو طرفہ پرنٹنگ: The Texas flag design is visible and correct from both sides.

Image: Illustration of the flag's three-layer design, emphasizing its strength.

Image: Detail of the double-stitched hem for enhanced durability.

Image: Close-up of a strong brass grommet for easy hanging.

پیکیج کے مشمولات

آپ کے پیکیج میں درج ذیل اشیاء ہونی چاہئیں:

• 2 x Ehaho Double Sided Texas Flags (16.7" x 12")

سیٹ اپ اور انسٹالیشن

The Ehaho Texas Flags are designed for easy attachment to whip lights or antenna flag poles. Follow these steps for installation:

1. Identify the desired mounting location on your whip light or antenna flag pole.
2. Align the flag's brass grommets with the attachment points on your whip light or pole.
3. Securely fasten the flag using appropriate clips, zip ties, or other mounting hardware (not included) through the grommets. Ensure the flag is taut but not overly stretched to allow for natural movement in the wind.
4. Verify that the flag is securely attached and will not detach during vehicle operation or exposure to wind.

Image: Two Texas flags attached to whip lights, illustrating how they connect.

تصویر: سابقample of flags installed on a UTV with whip lights.

تصویر: سابقample of a flag installed on a boat.

آپریٹنگ ہدایات

Once installed, your Ehaho Texas Flags are ready for use. They are suitable for a variety of environments and applications:

• Off-Road Vehicles: Ideal for UTVs, ATVs, Can-Am, Polaris RZR, and SXS vehicles to enhance visibility and display state pride.
• Marine Use: Can be used on boats and other marine vessels.
• General Outdoor/Indoor Display: Suitable for displaying in outdoor settings or even indoors where appropriate.

دیکھ بھال اور دیکھ بھال

To ensure the longevity and appearance of your Ehaho Texas Flags, follow these care guidelines:

• صفائی: ہلکے صابن اور ٹھنڈے پانی سے ہاتھ دھوئے۔ سخت صابن یا بلیچ سے پرہیز کریں۔
• خشک کرنا: Air dry completely. Do not machine dry or wring out the flag.
• ذخیرہ: When not in use, store the flags in a clean, dry place away from direct sunlight to prevent fading.
• معائنہ: Periodically inspect the flag for any signs of wear, tear, or damage to the grommets. Replace if significant damage is observed.

وضاحتیں

Image: Dimensions of the Texas flag.

خرابی کا سراغ لگانا

If you encounter any issues with your Ehaho Texas Flags, consider the following:

• Flag Tearing: Ensure the flag is not excessively taut when installed. High winds can cause wear; consider removing flags in extreme weather conditions.
• دھندلاہٹ: Prolonged exposure to direct sunlight can cause colors to fade over time. Store flags indoors when not in use to minimize exposure.
• ڈھیلا اٹیچمنٹ: Regularly check the grommets and mounting hardware to ensure the flag remains securely fastened.

وارنٹی اور سپورٹ

For any questions, concerns, or support regarding your Ehaho Texas Flags, please contact the manufacturer directly through the retailer's platform or the official Ehaho website. Please retain your purchase receipt for warranty purposes, if applicable.