MOUNTUP Dual Monitor Arm MU8012-W-07 Instruction Manual

1. تعارف

Thank you for choosing the MOUNTUP Dual Monitor Arm MU8012-W-07. This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

حفاظتی احتیاطی تدابیر

اس بات کو یقینی بنائیں کہ اسمبلی سے پہلے تمام اجزاء موجود ہیں اور بغیر کسی نقصان کے ہیں۔ اگر کوئی پرزہ غائب یا خراب ہو تو استعمال نہ کریں۔
Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitors.
Do not exceed the maximum weight capacity of 10kg (22 lbs) per arm.
Always follow the installation steps carefully. Improper installation may result in product damage or personal injury.
Keep children away from the product during assembly. Small parts may be a choking hazard.

MOUNTUP Dual Monitor Arm supporting two monitors on a desk, illustrating a dual monitor setup for enhanced productivity. — MOUNTUP Dual Monitor Arm in a typical dual monitor setup, enhancing workspace efficiency.

2. پیکیج کے مشمولات

براہ کرم چیک کریں کہ آپ کے پیکیج میں درج ذیل تمام اجزاء شامل ہیں:

Monitor Arm Assembly (x1)
VESA پلیٹ (x2)
ڈیسک کل۔amp بیس (x1)
گرومیٹ بیس (x1)
Mounting Hardware Kit (screws, washers, spacers)
Hex Wrenches (various sizes)
ہدایت نامہ (x1)

3. وضاحتیں

فیچر	تفصیلات
ماڈل	MU8012-W-07
مواد	مرکب سٹیل
رنگ	سفید
اسکرین کے سائز کی مطابقت	13 - 32 انچ
وزن کی صلاحیت (فی بازو)	2 - 10 کلوگرام (4.4 - 22 پونڈ)
VESA مطابقت	75x75mm، 100x100mm
بڑھتے ہوئے اختیارات	Clamp، گرومیٹ
جھکاؤ کی حد	+85° سے -45°
کنڈا رینج	180° (monitor plate), 270° (middle joint), 360° (base)
Rotation (Pivot)	360°
زیادہ سے زیادہ اونچائی ایڈجسٹمنٹ	44 سینٹی میٹر (17.3 انچ)
زیادہ سے زیادہ بازو توسیع	50 سینٹی میٹر (19.7 انچ)
پروڈکٹ کا وزن	3.1 کلوگرام (6.8 پونڈ)

Diagram showing monitor compatibility requirements: 13-32 inch screen size, 2-10kg weight capacity, and VESA 75x75mm or 100x100mm mounting patterns. — Ensure your monitors meet the size, weight, and VESA compatibility requirements.

4. سیٹ اپ اور انسٹالیشن

مرحلہ 1: اپنے چڑھنے کا طریقہ منتخب کریں۔

The MOUNTUP Dual Monitor Arm supports two installation methods: Clamp Mount and Grommet Mount. Choose the method that best suits your desk.

Comparison image showing two installation methods: clamp mounting on the right and grommet mounting on the left, with desk thickness requirements. — Two common installation methods: Clamp (right) and Grommet (left).

Clamp ماؤنٹ انسٹالیشن

cl منسلک کریںamp base to the main pole of the monitor arm.
cl رکھیںamp onto the edge of your desk. Ensure the desk thickness is between 10-70mm (0.4-2.7 inches).
cl کو سخت کریں۔amp screw until the arm is securely fastened to the desk. Ensure it is stable and does not wobble.

Detailed illustrations of clamp installation, showing compatibility with different desk edge types (with bottom frame, side panel, back panel) and required dimensions. — Clamp installation details for various desk configurations.

گرومیٹ ماؤنٹ کی تنصیب

If your desk has a grommet hole, ensure its diameter is between 10-60mm (0.4-2.4 inches) and the desk thickness is between 10-70mm (0.4-2.7 inches).
Attach the grommet base to the main pole.
میز کے سوراخ سے گرومیٹ بولٹ داخل کریں اور اسے فراہم کردہ پلیٹ اور نٹ کے ساتھ نیچے سے محفوظ کریں۔
Tighten the nut until the arm is firmly attached to the desk.

مرحلہ 2: VESA پلیٹوں کو مانیٹر سے منسلک کریں۔

Carefully lay your monitor face down on a soft, clean surface.
VESA پلیٹ کو اپنے مانیٹر کی پشت پر بڑھتے ہوئے سوراخوں کے ساتھ سیدھ میں رکھیں۔
Use the appropriate screws (M4 or M5) and washers from the hardware kit to secure the VESA plate to the monitor. Do not overtighten.

Step 3: Mount Monitors to Arms

Slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm.
Ensure the monitor clicks into place or is securely fastened by the quick-release mechanism.
دوسرے مانیٹر کے لیے دہرائیں۔

Image showing the quick-release VESA plate mechanism for easy attachment and detachment of monitors. — Quick-release VESA plate for easy monitor attachment and detachment.

مرحلہ 4: کیبل مینجمنٹ

Route your monitor cables through the integrated cable management clips on the underside of the arms. This helps maintain a tidy workspace.

پیچھے view of the monitor arm with cables neatly routed through integrated cable management clips and a compartment for hex wrench storage. — Integrated cable management keeps your workspace organized. Hex wrenches can be stored in the arm base.

5. آپریٹنگ اور ایڈجسٹمنٹ

The MOUNTUP Dual Monitor Arm offers flexible adjustments to optimize your viewتجربہ ہے.

Four panels demonstrating various monitor adjustments: 180-degree left/right swivel, 130-440mm height adjustment, +85 to -45 degree tilt, and 360-degree rotation (pivot). — ختمview of the monitor arm's extensive adjustment capabilities.

Adjusting Arm Tension (Gas Spring)

The gas spring mechanism allows for smooth height adjustments. If your monitor sags or is difficult to move, you may need to adjust the tension.

Instructions for adjusting the gas spring tension for both tilt and arm height, with diagrams showing clockwise for increasing tension and counter-clockwise for decreasing تناؤ — Adjusting gas spring tension for optimal monitor positioning.

To increase tension (if monitor sags): Use the provided hex wrench to turn the adjustment screw clockwise.
To decrease tension (if arm is too stiff): Turn the adjustment screw counter-clockwise.
Always adjust tension with the arm held horizontally. Test the movement after each small adjustment until the monitor holds its position freely.

ایڈجسٹمنٹ کی نگرانی کریں۔

اونچائی ایڈجسٹمنٹ: Gently push or pull the monitor up or down to your desired height. The gas spring will assist in holding the position. Max height is 44cm (17.3 inches).
جھکاؤ ایڈجسٹمنٹ: Tilt the monitor screen up to +85° or down to -45° to reduce glare and optimize viewing angles. Loosen the tilt bolt, adjust, then re-tighten.
کنڈا ایڈجسٹمنٹ: The arm allows for 180° swivel at the monitor plate, 270° at the middle joint, and 360° at the base, providing wide range of motion.
Rotation (Pivot): لینڈ سکیپ اور پورٹریٹ اورینٹیشن کے درمیان سوئچ کرنے کے لیے اپنے مانیٹر کو 360° گھمائیں۔

Diagram illustrating the multi-angle adjustment capabilities of the monitor arm, including 180-degree swivel at the monitor, 270-degree swivel at the middle joint, and 360-degree swivel at the base. — Detailed swivel capabilities of the monitor arm joints.

طرف view of the MOUNTUP monitor arm showing maximum height adjustment of 44cm and maximum extension of 50cm. — Maximum height and extension capabilities of the monitor arm.

6 دیکھ بھال

صفائی: مانیٹر بازو کو نرم سے صاف کریں، ڈیamp کپڑا کھرچنے والے کلینر یا سالوینٹس سے پرہیز کریں جو ختم کو نقصان پہنچا سکتے ہیں۔
متواتر جانچ پڑتال: وقتاً فوقتاً تمام پیچ اور کنکشن چیک کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ سخت اور محفوظ رہیں۔ اگر ضروری ہو تو دوبارہ سخت کریں۔
Gas Spring Longevity: The high-quality gas spring is tested for over 20,000 cycles. Proper tension adjustment will help maintain its performance over time.

Close-up of the high-quality gas spring mechanism within the monitor arm, highlighting its durability with a '20,000 cycle test' label. — The durable gas spring is designed for long-lasting performance.

7 خرابیوں کا سراغ لگانا

Monitor Sags or Won't Stay Up: The gas spring tension is too low. Refer to the "Adjusting Arm Tension" section and turn the adjustment screw clockwise to increase tension.
Arm is Too Stiff or Difficult to Move: The gas spring tension is too high. Refer to the "Adjusting Arm Tension" section and turn the adjustment screw counter-clockwise to decrease tension.
مانیٹر Wobbles: Ensure all mounting screws (VESA plate to monitor, arm to desk) are securely tightened. Check that the desk clamp or grommet mount is firm.
Monitor Tilt Angle Won't Hold: The tilt bolt may be loose. Tighten the tilt bolt on the VESA head.

8. وارنٹی اور سپورٹ

MOUNTUP provides a 2 سال کی کوالٹی گارنٹی from the date of purchase for this product. This warranty covers manufacturing defects and issues arising from normal use.

If you encounter any problems with your MOUNTUP Dual Monitor Arm, or if you have questions regarding installation or operation, please contact our customer support. You can typically find seller contact information through your purchase history on the platform where you bought the product (e.g., Amazon order details).

Please have your model number (MU8012-W-07) and purchase date ready when contacting support to ensure a swift resolution.

MOUNTUP MU8012-W-07