Saooer Solar Charge Controller 12V/24V 30A User Manual

1. تعارف

This manual provides essential instructions for the safe and efficient operation of your Saooer Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring optimal charging and protecting your battery from overcharge and over-discharge. It is compatible with both 12V and 24V solar systems and features a 30A discharge current capacity.

2. حفاظتی ہدایات

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may cause personal injury.

• بیٹری والیوم کو یقینی بنائیںtage is sufficient for the controller to recognize the battery type before the first installation.
• The charge controller is suitable for lead-acid batteries (OPEN, AGM, GEL) and lithium-ion batteries. Do not use it for other battery types.
• Install the charge controller indoors, away from direct sunlight, high temperatures, and humid environments.
• The controller will heat up during operation; ensure good ventilation.
• The controller's positive and negative terminals should be connected correctly. Reverse connection may damage the device.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

3. مصنوعات کی خصوصیات

• نظام جلد۔tagای مطابقت: Automatically detects 12V or 24V systems.
• ڈسچارج کرنٹ: 30A صلاحیت۔
• Integrated Micro Controller: Manages solar panel and battery operation efficiently.
• دوہری USB پورٹس: Supports mobile phone charging (5V/2A output).
• جامع تحفظ: Includes short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection to enhance system efficiency and battery lifespan.
• LCD ڈسپلے: Provides clear indication of status and data, allowing for convenient mode switching and parameter configuration.
• سایڈست پیرامیٹرز: User-configurable settings for various battery types and operational needs.
• ٹائمر بلٹ ان: For load control.

4. پیکیج کے مشمولات

• 1x Saooer Solar Charge Controller (30A)

5. سیٹ اپ اور انسٹالیشن

Follow these steps for proper installation of the solar charge controller. Incorrect connection order can damage the controller.

1. بیٹری کو جوڑیں: Connect the battery to the charge regulator first. Ensure correct polarity (positive to positive, negative to negative). This allows the controller to recognize the battery voltage.
2. سولر پینل کو جوڑیں: Connect the solar panel to the solar charge controller. Ensure correct polarity.
3. لوڈ کو جوڑیں: Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

Important Disconnection Note:

When disconnecting the system, always remove the solar panel connection first, then the load connection, and finally the battery connection. This prevents potential damage to the controller.

6. آپریٹنگ ہدایات

The controller features an LCD display and three buttons for operation: مینو, UP، اور نیچے.

6.1. LCD ڈسپلے

The LCD display shows real-time system status and data, including battery voltage, charging current, discharging current, and various parameter settings.

6.2. بٹن کے افعال

• مینو بٹن: Press to cycle through different display modes and enter parameter setting mode. Long press to exit setting mode.
• یو پی بٹن: In setting mode, press to increase the parameter value.
• نیچے بٹن: In setting mode, press to decrease the parameter value.

6.3. پیرامیٹر کی ترتیبات

To adjust parameters (e.g., battery type, charge/discharge voltage limits, load timer settings):

1. دبائیں مینو button until the desired parameter display appears.
2. دیر تک دبائیں مینو بٹن جب تک ظاہر ہونے والی قیمت چمکنا شروع نہ کرے۔
3. استعمال کریں۔ UP اور نیچے قدر کو ایڈجسٹ کرنے کے لیے بٹن۔
4. Once the desired value is set, long press the مینو سیٹنگ کو بچانے کے لیے دوبارہ بٹن دبائیں اور چمکتی ہوئی حالت سے باہر نکلیں۔

Refer to the specific icons on the LCD for detailed parameter identification.

7 دیکھ بھال

باقاعدگی سے دیکھ بھال آپ کے سولر چارج کنٹرولر کی لمبی عمر اور بہترین کارکردگی کو یقینی بناتی ہے۔

• صفائی: کنٹرولر کو صاف اور دھول اور ملبے سے پاک رکھیں۔ صفائی کے لیے خشک کپڑا استعمال کریں۔
• رابطے: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause power loss and overheating.
• وینٹیلیشن: Ensure the installation area has adequate ventilation to prevent overheating of the controller.
• معائنہ: Inspect the controller for any signs of physical damage or unusual operation.

8 خرابیوں کا سراغ لگانا

If you encounter issues with your solar charge controller, consider the following common troubleshooting steps:

• کوئی ڈسپلے/کوئی پاور نہیں: بیٹری کے کنکشن چیک کریں اور یقینی بنائیں کہ بیٹری میں کافی والیوم ہے۔tage. Verify all wiring is correct and secure.
• بیٹری چارج نہیں ہو رہی: Check solar panel connections and ensure the panel is receiving adequate sunlight. Verify solar panel voltage and current. Ensure the controller's charging parameters are correctly set for your battery type.
• لوڈ کام نہیں کر رہا: Check load connections. Ensure the load is not exceeding the controller's rated current. Check the load timer settings if applicable. The controller may have entered protection mode due to over-discharge or over-load; check the display for error codes or indicators.
• اوور والیمtagای/انڈر والیومtage Alarms: بیٹری والیوم چیک کریں۔tage. Ensure solar panel open-circuit voltage کنٹرولر کے زیادہ سے زیادہ ان پٹ والیوم سے زیادہ نہیں ہے۔tage.

If the problem persists after performing these checks, please contact customer support.

9. وضاحتیں

10. وارنٹی اور سپورٹ

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please contact Saooer customer service through their official channels.