VCELINK KJ31-C7-2P

VCELINK CAT7 RJ45 Tool-Free Connector Instruction Manual

Model: KJ31-C7-2P | Brand: VCELINK

1. تعارف

Thank you for choosing the VCELINK CAT7 RJ45 Tool-Free Connector. This product is designed for easy and reliable termination of CAT7 Ethernet cables, supporting high-speed data transmission up to 10 Gbps. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your connectors.

2. مصنوعات کی خصوصیات

  • آسان تنصیب: Tool-free design allows for simple installation and removal without crimping tools. Only basic cutting and stripping tools are required. Ideal for beginners or small-scale projects.
  • Ultra-High Speed Performance: Supports 10 Gbps data transmission at 600 MHz bandwidth, suitable for professional wiring.
  • وسیع مطابقت: Compatible with 22-24 AWG Ethernet cables (maximum outer diameter 8.5 mm). Works with CAT7 and RJ45 devices such as tablets, laptops, switches, and routers.
  • Stable and Durable Design: Zinc alloy housing provides superior shielding, reducing electromagnetic interference (EMI), near-end crosstalk (NEXT), and axial crosstalk (AXT).
  • Enhanced Cable Protection: A metal strain relief boot protects the cable from bending damage and improves overall shielding performance.
  • محفوظ کنکشن: Plastic cable holder prevents accidental cable disconnection. Special IDC design penetrates insulation for secure wire fixation.
  • Wiring Standards: The load bar supports both T568A and T568B wiring standards.

3. پیکیج کے مشمولات

پیکیج میں درج ذیل اشیاء شامل ہیں:

  • VCELINK CAT7 Tool-Free RJ45 Connector (2 units)
  • ہدایت نامہ (1 یونٹ)

4. وضاحتیں

فیچرتفصیلات
پروڈکٹ کی قسمCAT7 Tool-Free Plug
رنگچاندی
وزن15 گرام
طول و عرض45.50 ملی میٹر × 14.40 ملی میٹر × 18.00 ملی میٹر
Metal Shell Material & ProcessingZinc alloy, nickel plating, die-cast (forged)
پن کا موادPhosphor bronze, gold plating
IDC (Insulation Displacement Contact) MaterialPhosphor bronze, nickel plating
تائید شدہ ڈیٹا کی شرح10 جی بی پی ایس
تائید شدہ بینڈوتھ600MHz
شیلڈ کی قسمڈھال
Supported Wire Gauge (AWG)22 AWG - 24 AWG
بیرونی قطر کیبل7.00 ملی میٹر - 8.5 ملی میٹر
Single Core (Insulated) Diameter1.10 ملی میٹر - 1.18 ملی میٹر
Single Core (Non-Insulated) Diameter0.511 ملی میٹر - 0.643 ملی میٹر
Wiring StandardT568A/T568B
RJ45 Port Lifespan800+ سائیکل
IDC Connection Lifespan100+ سائیکل
اسٹوریج کا درجہ حرارت-40°C - 70°C
آپریٹنگ درجہ حرارت-10°C - 60°C
Table of specifications for VCELINK CAT7 RJ45 connector

Image: Detailed specifications of the VCELINK CAT7 RJ45 Tool-Free Connector.

5. سیٹ اپ اور انسٹالیشن

Follow these steps to properly install the VCELINK CAT7 RJ45 Tool-Free Connector onto your Ethernet cable.

  1. کیبل تیار کریں:
    Pass the Ethernet cable through the metal nut and the plastic cable holder. Ensure the components are oriented correctly for assembly.
    Step 1: Prepare the cable by threading it through the metal nut and plastic holder.

    Image: Cable prepared with metal nut and plastic holder.

  2. کیبل جیکٹ اتاریں:
    Carefully strip approximately 2 cm (0.8 inches) of the outer cable jacket. Exercise caution to avoid damaging the inner insulated wires.
    Step 2: Strip approximately 2 cm of the cable jacket.

    Image: Cable jacket stripped to expose inner wires.

  3. Arrange the Shielding Layer:
    If using a shielded cable, use a copper sticker or similar method to wrap the braided shield and foil shield around the cable jacket. This ensures proper grounding and shielding.
    Step 3: Arrange the shielding layer around the cable jacket.

    Image: Shielding layer arranged and secured.

  4. Align and Insert Wires:
    Untwist the 4 wire pairs and carefully pass all 8 individual wires through the wire holder. Insert each wire into its corresponding color-coded slot on the load bar, following either the T568A or T568B wiring standard. Ensure wires are fully seated.
    Step 4: Untwist and align wires into the load bar according to T568A or T568B standard.

    Image: Wires aligned in the load bar for T568A and T568B standards.

  5. تاروں کو محفوظ کریں:
    Align the wire holder with the terminal blade/notch inside the connector. Close the metal housing firmly. This action will secure the wires into the Insulation Displacement Contact (IDC) terminals, establishing a reliable connection.
    Step 5: Secure the wires by closing the connector housing.

    Image: Wires secured within the IDC terminals by closing the housing.

  6. کنیکٹر کو جمع کریں:
    Slide the plastic cable holder into its final position within the connector body. Then, tighten the metal nut securely to complete the assembly and provide strain relief.
    Step 6: Assemble the connector by sliding the holder and tightening the nut.

    Image: Final assembly of the connector with the nut tightened.

  7. کنکشن کی جانچ کریں:
    After assembly, perform a connection test using a cable tester to verify proper wiring and functionality. This ensures a reliable network connection.
    Step 7: Test the completed cable connection.

    Image: Testing the completed RJ45 connection.

6. آپریٹنگ ہدایات

Once the VCELINK CAT7 RJ45 Tool-Free Connector is properly installed on your Ethernet cable, it functions like any standard RJ45 connector.

  • کنکشن: Insert the terminated RJ45 connector into a compatible CAT7 or RJ45 port on your network device (e.g., router, switch, computer, tablet). Ensure it clicks into place to indicate a secure connection.
  • منقطع ہونا: To disconnect, gently press the release tab on the connector and pull it straight out from the port. Avoid pulling the cable directly without pressing the tab, as this can damage the connector or the device port.
  • دھول کا احاطہ: When not in use, utilize the included dust cover to protect the RJ45 contacts from dust and debris, which can affect performance.
VCELINK CAT7 RJ45 connectors connected to a network switch and wall plate.

Image: VCELINK CAT7 RJ45 connectors in use, demonstrating compact size and multiple connections.

7 دیکھ بھال

Proper maintenance ensures the longevity and optimal performance of your VCELINK CAT7 RJ45 Tool-Free Connectors.

  • صفائی: Keep the connector contacts clean and free from dust. Use a soft, dry cloth or compressed air to gently clean the contacts if necessary. Avoid using liquid cleaners.
  • ذخیرہ: When not in use, store the connectors in a clean, dry environment. Utilize the provided dust covers to protect the RJ45 pins.
  • معائنہ: Periodically inspect the connectors for any signs of physical damage, such as bent pins or cracks in the housing. Replace damaged connectors immediately.
  • دوبارہ قابل استعمال: The tool-free design allows for re-termination if needed. If a connection issue arises, you can open the connector, re-align the wires, and re-secure them.

8 خرابیوں کا سراغ لگانا

If you encounter issues with your VCELINK CAT7 RJ45 Tool-Free Connector, refer to the following troubleshooting tips:

مسئلہممکنہ وجہحل
کوئی نیٹ ورک کنکشن نہیں ہے۔Incorrect wiring (T568A/B mismatch)
Wires not fully seated in IDC terminals
خراب شدہ کیبل یا کنیکٹر
Device port issue
Verify wiring standard (T568A or T568B) on both ends.
Re-open connector and ensure all 8 wires are fully inserted and secured.
Inspect cable for breaks; inspect connector for bent pins or damage. Replace if necessary.
Test with another device or port.
سست نیٹ ورک کی رفتار۔Poor connection/partial contact
Cable length exceeds maximum for CAT7
Interference (EMI/NEXT/AXT)
Re-terminate the connector, ensuring all wires make proper contact.
Ensure cable length is within CAT7 specifications.
Verify proper shielding termination. Ensure no strong electromagnetic sources are nearby.
Connector does not fit into portIncorrect connector type
Physical obstruction or damage
Ensure you are using an RJ45 port. This connector is not compatible with RJ11.
Check for debris in the port or damage to the connector.
Cable pulls out easilyRelease tab not engaging
Metal nut not tightened
Ensure the connector is fully inserted until the tab clicks.
Tighten the metal nut on the connector to secure the cable.

9. وارنٹی اور سپورٹ

VCELINK is committed to providing high-quality products and excellent customer service.

  • وارنٹی: This product comes with a standard manufacturer's warranty. Please refer to the product packaging or our official webمخصوص وارنٹی شرائط و ضوابط کے لیے سائٹ۔
  • کسٹمر سپورٹ: If you encounter any product defects, have questions regarding installation, or require technical assistance, please do not hesitate to contact our customer support team. We aim to provide an appropriate solution within 24 hours.
  • رابطہ کی معلومات: For support, please visit the VCELINK store on Amazon or our official webسائٹ

© 2026 VCELINK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.