1. تعارف
This manual provides detailed instructions for the installation, operation, and maintenance of your FACULX W3103 Digital High-Power Temperature Controller. Please read this manual thoroughly before use to ensure proper functionality and safety.
The FACULX W3103 is a versatile digital thermostat designed for precise temperature control in high-power heating applications. It features a wide temperature measurement range, multiple control functions, and flexible power input options.
2. حفاظتی معلومات
انتباہ: یہ آلہ ہائی والیوم کے ساتھ کام کرتا ہے۔tage (AC220V) and high power (5000W). Improper installation or use can result in electric shock, fire, or personal injury. Always follow safety guidelines and consult a qualified electrician if unsure.
- Ensure the power supply is disconnected before any installation, wiring, or maintenance.
- آلے کو گیلے یا ڈی میں نہ چلائیں۔amp ماحولیات
- تصدیق کریں کہ وائرنگ ڈایاگرام کے مطابق تمام وائرنگ کنکشن محفوظ اور درست ہیں۔
- 30A کی زیادہ سے زیادہ موجودہ درجہ بندی سے تجاوز نہ کریں۔
- آلے کو آتش گیر مواد سے دور رکھیں۔
- یہ پروڈکٹ کھلونا نہیں ہے۔ بچوں کی پہنچ سے دور رکھیں۔
3. پروڈکٹ ختمview
The FACULX W3103 Digital Temperature Controller features a clear digital display, control buttons, and a remote temperature sensor for accurate readings.
تصویر 3.1: سامنے والا view of the FACULX W3103 Digital Temperature Controller with its wired temperature sensor.
کلیدی اجزاء:
- ڈیجیٹل ڈسپلے: Shows current temperature, set points, and operational status.
- "Start Setting" Buttons (Up/Down Arrows): Adjust the start temperature.
- "Stop Setting" Buttons (Up/Down Arrows): Adjust the stop temperature.
- "SET" Button: Enters setting mode and confirms selections.
- درجہ حرارت سینسر: External probe for accurate temperature measurement.
- وائرنگ ٹرمینلز: For power input and load output connections.
4. وضاحتیں
Refer to the table below for detailed technical specifications of the FACULX W3103 (AC220V 5000W) model.
تصویر 4.1: Physical dimensions of the temperature controller (96mm x 70mm x 46mm).
| فیچر | تفصیلات |
|---|---|
| پروڈکٹ کا نام | ڈیجیٹل درجہ حرارت کنٹرولر |
| ماڈل | ڈبلیو3103 |
| ان پٹ جلدtage (Current Model) | AC 220V |
| Output Power (Current Model) | 5000W (Max 30A) |
| فنکشن کی قسم | درجہ حرارت کنٹرول |
| آؤٹ پٹ کی قسم | والیومtagای آؤٹ پٹ |
| کنٹرول کی قسم | پوزیشن کنٹرول |
| پیمائش کا ان پٹ | NTC10K / B3435 / L = 1 meter |
| درجہ حرارت کی پیمائش کی حد | -50 °C سے 110 °C |
| درجہ حرارت کنٹرول رینج | -19 °C سے 99 °C |
| درجہ حرارت کی پیمائش کی درستگی | ± 0.2 °C |
| کنٹرول کی درستگی | 1 °C |
| طول و عرض (L x W x H) | 96 ملی میٹر x 70 ملی میٹر x 46 ملی میٹر |
| مواد | پلاسٹک، دھات |
5. سیٹ اپ اور انسٹالیشن
Careful installation is crucial for the safe and effective operation of the temperature controller. Ensure power is disconnected before proceeding.
تصویر 5.1: تفصیلی view of the controller's wiring terminals and display interface.
وائرنگ کی ہدایات:
- پاور سپلائی کنکشن: Connect the AC 220V power supply to the designated input terminals. Refer to the diagram on the device for correct polarity and terminal identification.
- لوڈ کنکشن: Connect your heating device (load) to the output terminals. Ensure the load's power consumption does not exceed 5000W or 30A.
- سینسر کنکشن: Plug the NTC temperature sensor into its dedicated port. The sensor cable length is 1 meter. Position the sensor in the area where temperature needs to be measured and controlled.
- چڑھنا: Mount the controller in a suitable, dry location, away from direct heat sources or excessive moisture. Ensure adequate ventilation.
IMPORTANT: Double-check all wiring before applying power. Incorrect wiring can damage the device or connected equipment and poses a safety risk.
6. آپریٹنگ ہدایات
Once installed and powered on, the controller will display the current temperature. Follow these steps to set your desired temperature range.
تصویر 6.1: Controller display indicating AC220V power input and temperature readings.
درجہ حرارت کے پیرامیٹرز کی ترتیب:
- پاور آن: Connect the device to the AC 220V power supply. The display will show the current temperature measured by the sensor.
- Set Start Temperature:
- Press the "SET" button once. The "Start Setting" value will flash.
- Use the "Start Setting" Up/Down arrow buttons to adjust the desired temperature at which the heating should activate.
- Press "SET" again to confirm and move to the Stop Temperature setting, or wait a few seconds for it to auto-save.
- Set Stop Temperature:
- After setting the Start Temperature, the "Stop Setting" value will flash.
- Use the "Stop Setting" Up/Down arrow buttons to adjust the desired temperature at which the heating should deactivate.
- Press "SET" again to confirm and exit setting mode, or wait a few seconds for it to auto-save.
The controller will now maintain the temperature within the set range. If the current temperature falls below the "Start Setting", the heating element will activate. If it rises above the "Stop Setting", the heating element will deactivate.
Advanced Functions (Intermittent Operation, Timed On/Off):
This model supports advanced functions like intermittent operation and timed on/off settings. Specific instructions for these modes are typically accessed by pressing and holding the "SET" button for several seconds to enter a parameter menu. Refer to the on-screen codes and a more detailed functional diagram (if available with the product packaging) for precise configuration of these advanced features.
7 دیکھ بھال
The FACULX W3103 is designed for reliable operation with minimal maintenance. Regular checks can help ensure its longevity and performance.
- صفائی: Periodically wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- رابطے: Annually inspect all wiring connections to ensure they are tight and free from corrosion.
- سینسر: Ensure the temperature sensor is clean and free from debris that could affect its accuracy. Do not bend or damage the sensor cable.
- وینٹیلیشن: Ensure the controller's ventilation openings are not obstructed to prevent overheating.
کسی بھی دیکھ بھال کو انجام دینے سے پہلے ہمیشہ بجلی منقطع کریں۔
8 خرابیوں کا سراغ لگانا
اگر آپ کو اپنے درجہ حرارت کنٹرولر کے ساتھ مسائل کا سامنا کرنا پڑتا ہے، تو درج ذیل عام مسائل اور حل دیکھیں:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ڈسپلے آف ہے۔ | بجلی کی فراہمی نہیں؛ غلط وائرنگ؛ اڑا ہوا فیوز | Check power connections; verify wiring; check circuit breaker/fuse. |
| درجہ حرارت پڑھنا غلط ہے۔ | Sensor damaged or improperly placed; sensor cable faulty. | Inspect sensor and cable for damage; reposition sensor; replace sensor if damaged. |
| حرارتی آلہ آن/آف نہیں ہو رہا ہے۔ | Incorrect temperature settings; faulty wiring to load; load malfunction. | Verify Start/Stop temperature settings; check load wiring; test heating device independently. |
| Controller displays "HHH" or "LLL" | Temperature sensor open circuit (LLL) or short circuit (HHH); temperature out of range. | Check sensor connection; replace sensor if faulty; ensure operating within specified temperature range. |
اگر ان حلوں کو آزمانے کے بعد بھی مسئلہ برقرار رہتا ہے، تو براہ کرم کسٹمر سپورٹ سے رابطہ کریں۔
9. وارنٹی اور سپورٹ
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product model information handy when contacting support.
مینوفیکچرر: FACULX
ماڈل نمبر: W3103 (AC220V 5000W)