Procolored F13 Panda DTF Printer User Manual

1. تعارف

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Procolored F13 Panda DTF Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.

Figure 1: Procolored F13 Panda DTF Printer.

2. حفاظتی معلومات

پرنٹر کو چوٹ یا نقصان سے بچنے کے لیے ہمیشہ درج ذیل حفاظتی احتیاطی تدابیر پر عمل کریں:

• یقینی بنائیں کہ پرنٹر ایک مستحکم، سطحی سطح پر رکھا گیا ہے۔
• Connect the printer to a grounded power outlet with the correct voltage (AC 100-230V)۔
• پرنٹر کو پانی یا ضرورت سے زیادہ نمی کے سامنے نہ رکھیں۔
• آپریشن کے دوران ہاتھوں کو حرکت پذیر حصوں سے صاف رکھیں۔
• Use only recommended inks and cleaning solutions.
• بچوں کی پہنچ سے دور رکھیں۔

3. پیکیج کے مشمولات

تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:

• Procolored F13 DTF Printer
• Roll Film 13"
• DTF Ink Set (CMYK+WW)
• Nozzle Protection Fluid
• DTF Powder
• پلاسٹک کی حمایت
• Data Cable (USB)
• پاور کیبل
• Moisturizing Device
• کچرے کی بوتل
• کارتوس
• Spare Ink Tube
• رولر بریکٹ
• انک پیڈ
• وائپر
• کٹر بلیڈ
• USB ڈونگل
• سرنج
• سکریو ڈرایور
• رولر بار
• ایکسٹینشن ٹیوب
• Needle Hub
• بہار
• جھاڑو

Figure 2: Included accessories for the Procolored F13 DTF Printer.

4. سیٹ اپ گائیڈ

4.1 ان باکسنگ اور ابتدائی جگہ کا تعین

Carefully remove the printer and all components from the packaging. Place the printer on a sturdy, level surface in a well-ventilated area.

4.2 Film Roll Installation

Install the 13-inch DTF film roll onto the designated holder at the rear of the printer. Ensure the film feeds smoothly into the printer mechanism.

4.3 Ink System Setup

Fill the ink tanks with the corresponding DTF pigment inks (Cyan, Magenta, Yellow, Black, White, Light Cyan). Ensure the white ink circulation system is properly connected and functioning to prevent clogging.

Figure 3: Illustration of the advanced white ink system, showing circulation, siphon effect, and automatic cleaning.

4.4 Power Connection and Software Installation

Connect the power cable to the printer and a suitable power outlet. Install the Procolored RIP software (compatible with Windows 7/10/11) on your computer. Follow the on-screen instructions for software installation and driver setup.

شکل 4: ختمview of the Procolored RIP software interface and available tutorials.

5. آپریٹنگ ہدایات

5.1 Preparing for Print

1. Power on the printer using the main switch.
2. Ensure the DTF film is correctly loaded and aligned.
3. Open the Procolored RIP software on your computer.
4. Import your design and adjust settings such as size, resolution (up to 1440x1440dpi), and color profile.

5.2 پرنٹنگ کا عمل

Initiate the print job from the software. The printer will feed the film and apply ink. The built-in cutter will automatically trim the film after printing, optimizing material usage.

5.3 Post-Printing

After printing, apply DTF powder to the wet ink and cure it using a DTF oven or heat press. Once cured, the design is ready for transfer to textiles.

شکل 5: سابقamples of versatile applications for DTF prints, including shirts, flags, tote bags, and caps.

6 دیکھ بھال

6.1 خودکار صفائی کا نظام

The F13 Panda DTF Printer features an automatic cleaning system that operates even when the printer is powered on. This system helps prevent print head clogs and ensures consistent print quality. Regular use of this feature is recommended.

6.2 White Ink Circulation

The printer includes a white ink circulation system with a siphon filtration diaphragm pump. This system minimizes blockages and maintains the quality of white ink. Ensure the system is always active during operation.

6.3 عمومی صفائی

وقتا فوقتا پرنٹر کے بیرونی حصے کو نرم سے صاف کریں، ڈیamp cloth. Refer to the software's maintenance section for specific print head cleaning procedures if needed.

7 خرابیوں کا سراغ لگانا

اگر آپ کو اپنے پرنٹر کے ساتھ مسائل کا سامنا ہے، تو درج ذیل عام حل پر غور کریں:

• پرنٹ کوالٹی کے مسائل: Perform a nozzle check and head cleaning through the software. Ensure ink levels are sufficient.
• Film Feeding Problems: Check for obstructions in the film path and ensure the film roll is correctly installed and aligned.
• سافٹ ویئر کی خرابیاں: Restart the software and the printer. Ensure your software and drivers are up to date.
• رابطے کے مسائل: Verify USB cable connection and ensure the printer is powered on.

For persistent issues, contact Procolored customer service.

8. وضاحتیں

9. وارنٹی اور سپورٹ

Your Procolored F13 Panda DTF Printer comes with a comprehensive warranty:

• Print Head and Related Components: Six-month warranty.
• دیگر لوازمات: ایک سال کی ضمانت

Our dedicated customer service team is available 24/6 to address any queries or technical issues you may encounter. Please refer to your purchase documentation for specific contact details.