1. تعارف
The CADDXFPV Eclipse Thermal Camera is an advanced thermal imaging solution designed for various applications, including FPV (First Person View) drones. This manual provides essential information for the proper setup, operation, and maintenance of your thermal camera system. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2. حفاظتی معلومات
- Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
- آلے کو گرانے یا اسے سخت اثرات کے تابع کرنے سے گریز کریں۔
- درست والیوم کو یقینی بنائیںtage is supplied to the device as specified in the 'Specifications' section. Incorrect voltage can cause permanent damage.
- آلے کو پانی اور نمی سے دور رکھیں۔
- Do not attempt to disassemble or modify the camera system. This will void the warranty and may cause damage.
- Use only original or approved accessories.
3. اجزاء ختمview
The CADDXFPV Eclipse Thermal Camera system typically includes the following main components:
- Thermal Camera Module: The primary unit responsible for capturing thermal images.
- Main Processing Unit: Handles video processing, power management, and interfaces.
- اینٹینا: For video transmission (if applicable to your specific variant).
- منسلک کیبلز: For power, video, and data transmission between modules.
4. وضاحتیں
The following specifications apply to the Eclipse Camera-640HD model. Specifications may vary slightly for other variants (384, 256).
| فیچر | تفصیل |
|---|---|
| ڈیٹیکٹر کی قسم | بغیر ٹھنڈا وینیڈیم آکسائیڈ |
| قرارداد | 256x192@12µm |
| طول موج کی حد | 8 ~ 14µm |
| NETD | ≤40mk @ F1 25°C |
| لینس | F1.0/4mm/50°(H)*37.2°(V)*62.3°(D) |
| فریم ریٹ | 50 ایف پی ایس |
| بجلی کی کھپت | <1.5w |
| آؤٹ پٹ | پال |
| سپلائی جلدtage | 5v~20v |
| لینس | 4 ملی میٹر |
| آپریٹنگ درجہ حرارت | -20°C~60°C |
| ینالاگ انٹرفیس | سی وی بی ایس |
| ایچ ڈی انٹرفیس | MIPI-CSI/Walksnail Avatar |
| تاخیر | اوسط لیٹنسی 20ms |
| تصویری معیار | AI امیج میں اضافہ |
| مواد | سٹینلیس سٹیل |
| قابل کنٹرول فاصلہ | 200~800 (units not specified, typically meters for FPV) |
5. سیٹ اپ اور وائرنگ
Carefully follow the wiring diagrams below to connect your CADDXFPV Eclipse Thermal Camera system. Incorrect wiring can damage the device and connected components.
5.1 UART کنکشن
This connection is typically used for data communication, such as OSD (On-Screen Display) control or flight controller integration.
| پن | فنکشن |
|---|---|
| TX2 | UART Transmit 2 |
| RX2 | UART Receive 2 |
| جی این ڈی | گراؤنڈ |
| 5V0 | 5V پاور آؤٹ پٹ |
5.2 Main Power and Video Output
This connection provides power to the unit and outputs the video signal. Ensure the power supply is within the specified voltagای رینج (9V-26V)۔
| پن | فنکشن |
|---|---|
| سی وی بی ایس | اینالاگ ویڈیو آؤٹ پٹ |
| Power 9V-26V | Main Power Input (9V to 26V) |
| جی این ڈی | گراؤنڈ |
| او ایس ڈی | آن اسکرین ڈسپلے کنٹرول |
| وی بی یو ایس | والیومtage Bus (Power Output) |
نوٹ: Always double-check your wiring before applying power to prevent damage to the camera or other electronic components.
6. آپریٹنگ ہدایات
6.1 پاور آن
Once correctly wired, apply power within the specified voltage range (5V-20V for the camera module, 9V-26V for the main unit). The system should initialize, and thermal video output will be available via the CVBS (Analog) or MIPI-CSI/Walksnail Avatar (HD) interfaces.
6.2 ویڈیو آؤٹ پٹ۔
The camera outputs a PAL video signal. Ensure your display device or video receiver is compatible with PAL format. The HD interface supports MIPI-CSI and Walksnail Avatar systems for high-definition thermal video.
6.3 Thermal Imaging
The camera utilizes an uncooled vanadium oxide detector to capture thermal radiation. The AI Image Enhancement feature helps improve the clarity and detail of the thermal feed. The latency is approximately 20ms, providing a responsive experience for FPV applications.
7 دیکھ بھال
- صفائی: Gently clean the camera lens and housing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- ذخیرہ: کیمرہ کو ٹھنڈی، خشک جگہ پر، براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور رکھیں۔
- معائنہ: پہننے یا نقصان کے کسی بھی نشان کے لیے کیبلز اور کنیکٹرز کا باقاعدگی سے معائنہ کریں۔
8 خرابیوں کا سراغ لگانا
- کوئی طاقت نہیں: Check all power connections and ensure the supply voltage is within the specified range (9V-26V for the main unit). Verify that the power source is functioning correctly.
- کوئی ویڈیو آؤٹ پٹ نہیں: Confirm that the video output cable (CVBS or HD interface) is securely connected to your display device or video receiver. Ensure your display is set to the correct input and supports PAL format for analog output.
- خراب تصویری معیار: Check for any obstructions on the camera lens. Ensure the camera is operating within its specified temperature range (-20°C to 60°C).
- وقفے وقفے سے سگنل: Inspect antenna connections for tightness and ensure they are not damaged. Check for potential interference sources in your operating environment.
9۔ صارف کی تجاویز
- For optimal thermal performance, allow the camera a few moments to stabilize after powering on, especially in varying ambient temperatures.
- Experiment with different mounting positions on your drone or platform to find the best field of view and minimize vibrations.
- Keep the lens clean to ensure clear thermal imagery. Dust or smudges can significantly degrade performance.
- When using the HD interface, ensure your digital FPV system (e.g., Walksnail Avatar) is updated to the latest firmware for best compatibility and features.
10. وارنٹی اور سپورٹ
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the CADDXFPV customer service channels.
11. رابطہ کی معلومات
For further assistance or inquiries, please contact CADDXFPV customer support through their official webسائٹ یا مجاز تقسیم کار۔
