1. تعارف
The SINOTIMER CN101S is a reliable 1-second interval digital LCD timer switch designed for automatic control of various electrical equipment. This programmable time relay allows you to set precise ON/OFF schedules over a 7-day weekly cycle, with a minimum interval of 1 second. It is ideal for applications such as controlling streetlights, neon signs, lamps, water heaters, air conditioners, billboards, electric cookers, boosters, sprayers, bottlers, preheaters, agriculture facilities, and broadcasting equipment.
Equipped with a built-in battery, the CN101S retains its programmed settings even during power failures, ensuring continuous operation. Its design features low power consumption, a high-accuracy CMOS chip, and strong anti-jamming capabilities, making it simple and easy to set up and use.
2. کلیدی خصوصیات
- قابل پروگرام کنٹرول: 24 hours / 7 days a week programming with 1-second interval.
- اعلی صلاحیت: Rated for 3500 Watts / 16 Amps.
- میموری بیک اپ: 1.2V built-in battery saves programs during power outages
- درستگی: Auto time error correction of +/- 30 seconds weekly.
- ان پٹ/آؤٹ پٹ والیومtage: 200-250VAC، 50/60Hz۔
- آؤٹ پٹ کی تشکیل: 1 Normally Open (NO) contact.
- مواد: Durable ABS + electronic components.
- کومپیکٹ ڈیزائن: Easy to integrate into various setups.
3. تکنیکی تفصیلات
| پیرامیٹر | قدر |
|---|---|
| ماڈل | CN101S۔ |
| ان پٹ جلدtage | 200-250VAC، 50/60Hz |
| آؤٹ پٹ والیمtage | 200-250VAC |
| زیادہ سے زیادہ لوڈ موجودہ | 16 Amps |
| زیادہ سے زیادہ لوڈ پاور | 3500 واٹ |
| پروگرامیبلٹی | 24 hours / 7 days weekly |
| کم از کم وقفہ | 1 سیکنڈ |
| Time Error Correction | +/- 30 seconds weekly (Auto) |
| میموری بیک اپ۔ | 1.2V Built-in Battery |
| مواد | ABS + الیکٹرانک اجزاء |
| طول و عرض (L x W x H) | 7.0 سینٹی میٹر x 7.0 سینٹی میٹر x 4.0 سینٹی میٹر |
4. سیٹ اپ اور وائرنگ
اہم حفاظتی نوٹس: Installation should be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected before attempting any wiring.
4.1 وائرنگ ڈایاگرام
Refer to the diagram below for proper wiring connections. The timer features 5 terminals on the back for input power and load connection.
- Terminal 1 (LINE INPUT): Connect the Live (L) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 2 (NEUT INPUT): Connect the Neutral (N) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 3 (NEUT POWER OUTPUT): Connect the Neutral (N) wire of your electrical load to this terminal. This provides the neutral path for the load.
- Terminal 4 (LOAD POWER OUTPUT): Connect the Live (L) wire of your electrical load to this terminal. This is the switched Live output (Normally Open contact) that the timer will control.
- Terminal 5 (LOAD POWER OUTPUT): This terminal is also labeled "LOAD". Given the specification of "1NO" (one Normally Open contact), Terminal 4 is the primary switched output. Terminal 5 may be an alternative connection point for the switched load or for specific dual-load configurations not typically used with a single NO relay. For standard operation, use Terminal 4 for the switched live to your load.
یقینی بنائیں کہ تمام کنکشن محفوظ اور موصل ہیں۔
4.2 Initial Power-Up and Display Overview
Once wired, apply power. The LCD display will illuminate. If the display is blank or dim, allow the internal battery to charge for a few minutes. The built-in 1.2V battery ensures that your programmed settings are retained even if the main power is interrupted.
سامنے والے پینل میں شامل ہیں:
- LCD ڈسپلے: Shows current time, day, ON/OFF status, and programming modes.
- دستی بٹن: For manual override of the timer's output.
- پی (پروگرام) بٹن: Enters and navigates programming mode.
- D+ (Day) Button: Adjusts the day of the week or selects days in program mode.
- H+ (Hour) Button: Adjusts the hour.
- M+ (Minute) Button: Adjusts the minute.
- Clock Icon Button: Used in conjunction with D+, H+, M+ to set the current time.
- R (ری سیٹ) بٹن: Resets the timer to factory defaults (clears all programs and current time).
5. آپریٹنگ ہدایات
5.1 موجودہ وقت اور دن کی ترتیب
- دبائیں اور تھامیں۔ گھڑی کی علامت بٹن
- منعقد کرتے ہوئے گھڑی کی علامت بٹن ، دبائیں D+ ہفتے کا موجودہ دن مقرر کرنے کے لیے۔
- منعقد کرتے ہوئے گھڑی کی علامت بٹن ، دبائیں H+ موجودہ وقت مقرر کرنے کے لیے۔
- منعقد کرتے ہوئے گھڑی کی علامت بٹن ، دبائیں M+ موجودہ منٹ سیٹ کرنے کے لیے۔
- جاری کریں۔ گھڑی کی علامت بٹن موجودہ وقت اور دن اب مقرر ہیں۔
5.2 Programming ON/OFF Schedules
The CN101S allows for multiple ON/OFF programs. Follow these steps to set your desired schedules:
- دبائیں P (Program) button once to enter program setting mode. The display will show "1 ON".
- دبائیں D+ to select the day(s) for this program. You can choose individual days, weekdays, weekends, or all 7 days.
- دبائیں H+ to set the desired ON hour.
- دبائیں M+ to set the desired ON minute.
- دبائیں P (Program) button again. The display will show "1 OFF".
- دبائیں D+ to select the day(s) for this OFF program (usually the same as the ON program).
- دبائیں H+ to set the desired OFF hour.
- دبائیں M+ to set the desired OFF minute.
- To set additional programs, press P (Program) again to cycle through "2 ON", "2 OFF", and so on. Repeat steps 2-8 for each program.
- Once all programs are set, press the گھڑی کی علامت button to exit programming mode and return to the current time display.
The timer supports 1-second intervals, meaning you can set very precise ON/OFF durations. If a program is not needed, simply skip setting its ON/OFF times, or ensure the ON and OFF times are identical to effectively disable it.
5.3 دستی اوور رائڈ
دی دستی button allows you to temporarily override the programmed schedule. Pressing this button will cycle through different modes:
- آن: The output is continuously ON, ignoring programs.
- آٹو: The timer operates according to the programmed schedules.
- بند: The output is continuously OFF, ignoring programs.
Select "AUTO" for the timer to follow your programmed schedules.
5.4 Resetting the Timer
To clear all programs and reset the current time to factory defaults, press the small R (Reset) button using a pointed object (like a pen tip). After resetting, you will need to set the current time and reprogram all schedules.
6 دیکھ بھال
- صفائی: Wipe the timer's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- بیٹری: The CN101S has a built-in 1.2V battery for memory backup. This battery is not user-replaceable. If the timer consistently loses settings after power outages, the battery may need servicing by a professional.
- ماحولیات: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
7 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ڈسپلے خالی یا مدھم ہے۔ | No power supply or internal battery discharged. | Check power connections. Allow timer to charge for a few minutes after initial power-up. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings, manual override active, or incorrect current time. |
|
| Programs are lost after a power outage. | Internal backup battery is depleted or faulty. | The battery is not user-replaceable. If this issue persists, consider professional servicing or replacement. |
| بٹن غیر جوابی ہیں۔ | سافٹ ویئر کی عارضی خرابی یا جسمانی نقصان۔ | Try pressing the R (Reset) button. If unresponsive, disconnect power for a few minutes and reconnect. If problem persists, contact support. |
8۔ صارف کی تجاویز
- For critical applications, always double-check your programmed schedules after setting them.
- Consider using the manual override function for temporary changes without altering your main programs.
- When setting programs, ensure the ON time is before the OFF time within a 24-hour cycle, or that the OFF time is on the subsequent day if the cycle spans midnight.
9. وارنٹی اور سپورٹ
For technical assistance, warranty information, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.