CLAGE M3/SMB چھوٹا فوری واٹر ہیٹر صارف دستی

1. اہم حفاظتی ہدایات

Please read these instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.

• This appliance must be installed by a qualified electrician and plumber in accordance with all local and national regulations.
• Ensure the electrical supply matches the specifications of the appliance (230 V, 3.5 kW).
• Do not operate the appliance if it is damaged or not functioning correctly.
• Do not block the water outlet or tampایر پریشر ریلیف والو کے ساتھ۔
• This unit is designed for pressureless operation. Only use the special mixer tap supplied with the unit.
• آپریشن کے دوران بچوں کو آلات سے دور رکھیں۔
• کوئی بھی دیکھ بھال یا صفائی کرنے سے پہلے بجلی کی فراہمی منقطع کر دیں۔

2. پروڈکٹ ختمview

The CLAGE M3/SMB is a compact, hydraulically controlled small instantaneous water heater designed for over-sink installation. It provides hot water instantly for a single tap, making it ideal for hand washing or small dishwashing tasks. The unit features an effective bare-wire heating system (IES®) and comes with a special mixer tap for wall connection.

This image displays the CLAGE M3/SMB small instantaneous water heater unit mounted above a chrome-finished mixer tap. The water heater unit is a compact, rectangular, silver-colored device designed for over-sink installation. The mixer tap features two control knobs and a curved spout.

3. تکنیکی تفصیلات

4. تنصیب (سیٹ اپ)

تنصیب ایک قابل پیشہ ور کی طرف سے انجام دیا جانا چاہئے.

4.1 پیک کھولنا

1. پیکیجنگ سے تمام اجزاء کو احتیاط سے ہٹا دیں۔
2. Check for any visible damage. Do not install if damaged.
3. Ensure all parts listed in the packing contents are present.

4.2 یونٹ لگانا

1. Select a suitable wall location directly above the sink, ensuring sufficient space for maintenance and operation.
2. Use the variable metal wall bracket to mark drilling points.
3. سوراخ ڈرل کریں اور مناسب وال پلگ ڈالیں۔
4. Securely fasten the wall bracket to the wall.
5. Mount the water heater unit onto the bracket.

4.3 پانی کا کنکشن

1. Connect the cold water supply to the designated inlet on the mixer tap (usually marked blue).
2. Connect the hot water outlet from the unit to the designated inlet on the mixer tap (usually marked red).
3. Ensure all connections are tight to prevent leaks. Use appropriate sealing materials.
4. Open the main water supply and check for leaks.
5. Before electrical connection, flush the unit by opening the tap until water flows freely and air is expelled.

4.4 الیکٹریکل کنکشن

1. Ensure the main power supply is switched off at the circuit breaker.
2. Connect the appliance to a dedicated 230 V, 3.5 kW electrical circuit. The unit is plug-ready.
3. مناسب بنیاد کی تصدیق کریں۔
4. Once connections are secure, switch on the main power supply.

5. آپریشن

5.1 پہلا استعمال

1. After installation and electrical connection, ensure the unit is completely filled with water by opening the cold water tap until water flows steadily.
2. Turn the hot water knob on the mixer tap. The heating element will activate, and hot water will begin to flow after a short delay.
3. Adjust the water temperature by mixing hot and cold water using the mixer tap controls.

5.2 روزانہ استعمال

• To obtain hot water, turn the hot water knob on the mixer tap. The unit will heat water as it flows through.
• To obtain cold water, turn the cold water knob.
• Adjust the flow rate and temperature as desired using the tap controls.
• The unit is designed for continuous flow within its specified capacity.

6 دیکھ بھال

Regular maintenance ensures optimal performance and longevity of your CLAGE M3/SMB water heater.

• باہر کی صفائی: یونٹ کے بیرونی حصے کو نرم، ڈی سے صاف کریں۔amp کپڑا کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• ڈیسکلنگ: Depending on water hardness, limescale can build up in the heating system. If you notice a decrease in hot water flow or temperature, the unit may need descaling. This procedure should be performed by a qualified technician.
• رابطوں کی جانچ کرنا: Periodically inspect water and electrical connections for any signs of leaks or wear.
• Mixer Tap Maintenance: Clean the aerator of the mixer tap regularly to remove any debris or limescale buildup that might restrict water flow.

7 خرابیوں کا سراغ لگانا

کسٹمر سپورٹ سے رابطہ کرنے سے پہلے، براہ کرم درج ذیل ٹربل شوٹنگ گائیڈ سے رجوع کریں:

If the problem persists after attempting these solutions, please contact a qualified technician or CLAGE customer support.

8. وارنٹی اور سپورٹ

For warranty information, technical support, or spare parts, please refer to the official CLAGE website or contact your local CLAGE dealer. Keep your purchase receipt as proof of purchase.