1. تعارف
دی Amprobe LAN-1 LAN Cable Tester is a diagnostic tool designed to identify and trace data cables and connectors. It helps detect common wiring issues such as shorts, miswirings, and open circuits in various cable types. This manual provides detailed instructions for the proper use, setup, and maintenance of your LAN-1 tester.
The LAN-1 evaluates most common cable types, including 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, as well as RJ45 and BNC connectors. It can test cables up to 300 meters long and uses LED indicators and an audible buzzer to signal cable status and errors.
2. حفاظتی معلومات
براہ کرم آپریٹنگ کرنے سے پہلے تمام حفاظتی ہدایات کو پڑھیں اور سمجھیں۔ Amprobe LAN-1 LAN Cable Tester. Failure to follow these instructions may result in injury or damage to the device.
- اگر آلہ خراب ہو یا صحیح طریقے سے کام نہ کر رہا ہو تو اسے استعمال نہ کریں۔
- Ensure the correct battery type and polarity are used during installation.
- ڈیوائس کو انتہائی درجہ حرارت، نمی، یا براہ راست سورج کی روشنی کے سامنے لانے سے گریز کریں۔
- Do not attempt to repair or modify the device yourself. Refer all servicing to qualified personnel.
- Always disconnect the cable tester from any active network or power source before performing maintenance or battery replacement.
3. پیکیج کے مشمولات
تصدیق کریں کہ نیچے دی گئی تمام اشیاء آپ کے پیکج میں موجود ہیں:
- LAN-1 LAN Cable Tester
- (1) Remote terminator
- (1) RJ45 to female BNC cable
- (1) RJ45 to male BNC cable
- (1) RJ45 to RJ45 cable
- (1) Female BNC to female BNC cable
- (1) 9V battery (installed)
- ہدایات (یہ دستی)
4. پروڈکٹ ختمview
دی Amprobe LAN-1 features a compact design with intuitive controls and clear LED indicators for efficient cable testing.
4.1 کلیدی خصوصیات
- کیبل ٹیسٹنگ: Locates and traces data cables and connectors to identify shorts, miswiring, and opens.
- ورسٹائل مطابقت: Evaluates 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, along with RJ45 and BNC connectors.
- غلطی کا اشارہ: An audible buzzer indicates an error condition in the cable.
- توسیعی رینج: Tests cables up to 300 meters long.
- صاف ڈسپلے: Eighteen red and green LEDs indicate the source or test results.
- ٹیسٹ کے طریقوں: Supports Loopback Test and Remote Test functions.
- حفاظت کی تعمیل: CE - EMC certified.
4.2 اجزاء کی شناخت
تصویر 1: سامنے والا view کی Amprobe LAN-1 LAN Cable Tester. This image displays the main unit with its LED pin-out indicator, battery status light, and control buttons including AUTO, MAN, HOLD, TEST, BATT, and the power button.
تصویر 2: Amprobe LAN-1 LAN Cable Tester showing the main unit and the remote terminator module. This view highlights how the remote unit connects to the main tester for comprehensive cable testing.
- PIN-OUT INDICATOR LEDs: Displays the wiring status for each pin (1-8) and ground (G).
- BATT LED: بیٹری کی حیثیت کی نشاندہی کرتا ہے۔
- آٹو بٹن: Initiates automatic scanning of cable pins.
- MAN Button: Allows manual step-through of cable pins.
- ہولڈ بٹن: Pauses the current test result display.
- ٹیسٹ بٹن: Starts a test cycle.
- POWER Button (Yellow): ڈیوائس کو آن اور آف کرتا ہے۔
- RJ45 پورٹ: For connecting RJ45 cables.
- BNC Port: For connecting BNC cables.
- Remote Terminator: A separate module used for testing installed cables or long runs.
5. سیٹ اپ
5.1 بیٹری کی تنصیب
The LAN-1 tester is powered by one 9V battery, which is typically pre-installed. If replacement is needed:
- یقینی بنائیں کہ آلہ بند ہے۔
- Locate the battery compartment cover on the back of the main unit.
- Remove the screw(s) securing the cover and carefully open it.
- Remove the old 9V battery and disconnect it from the terminals.
- Connect a new 9V battery, ensuring correct polarity (+ to + and - to -).
- بیٹری کو کمپارٹمنٹ میں رکھیں اور کور کو تبدیل کریں، اسے سکرو سے محفوظ کریں۔
The battery provides power for up to 20 hours of testing.
5.2 Connecting Cables for Testing
Before testing, ensure the cable is disconnected from any active network equipment.
- For patch cables (short cables not installed in walls): Connect one end of the cable to the RJ45 or BNC port on the main unit and the other end to the corresponding port on the remote terminator.
- For installed cables (e.g., wall plates, patch panels): Connect one end of the cable to the RJ45 or BNC port on the main unit. Connect the remote terminator to the other end of the installed cable (e.g., at the wall plate in another room).
6. آپریٹنگ ہدایات
6.1 پاور آن/آف۔
پیلے رنگ کو دبائیں۔ پاور button to turn the device on. Press it again to turn the device off.
6.2 ٹیسٹ کرنا
Once the cable is connected, you can perform a test:
- دبائیں ٹیسٹ button to initiate a cable test.
- Automatic Scan (AUTO mode): دبائیں آٹو button. The tester will automatically scan through each pin (1-8 and G) and display the results sequentially. This is suitable for quick checks.
- Manual Scan (MAN mode): دبائیں آدمی button. Each press of the آدمی button will advance the test to the next pin, allowing for a detailed examination of each connection.
- ہولڈ فنکشن: دبائیں پکڑو button to pause the current display of the pin-out indicator. Press it again to resume scanning.
6.3 Interpreting LED Indicators
The 18 red and green LEDs on the PIN-OUT INDICATOR provide visual feedback on the cable's status:
- گرین ایل ای ڈی: Indicates a correct connection for the corresponding pin.
- ریڈ یلئڈی: Indicates an error for the corresponding pin (e.g., open circuit, short circuit, miswiring).
- کوئی ایل ای ڈی نہیں: May indicate an open circuit or a broken wire for that pin.
- بجر: An audible buzzer will sound when an error condition is detected, providing an additional alert.
The LEDs on the remote module will mirror the main unit's display for the corresponding pins, allowing for verification of end-to-end continuity.
6.4 بیٹری سٹیٹس چیک کریں۔
دبائیں بیٹ button to check the battery level. The BATT LED will illuminate if the battery has sufficient power. If the BATT LED does not light up or is dim, replace the 9V battery.
7 دیکھ بھال
7.1 صفائی
To ensure the longevity and proper functioning of your LAN-1 tester, keep it clean and free from dust and debris.
- آلے کے بیرونی حصے کو نرم سے صاف کریں، ڈیamp کپڑا کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
- Ensure no moisture enters the ports or battery compartment.
7.2 بیٹری کی تبدیلی
Replace the 9V battery when the BATT LED indicates low power or if the device fails to power on. Refer to Section 5.1 for detailed battery installation instructions.
استعمال شدہ بیٹریوں کو ہمیشہ مقامی ضابطوں کے مطابق ٹھکانے لگائیں۔
8 خرابیوں کا سراغ لگانا
اگر آپ کو اپنے ساتھ مسائل کا سامنا کرنا پڑتا ہے۔ Amprobe LAN-1 LAN Cable Tester, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ڈیوائس آن نہیں ہوتی ہے۔ | کم یا مردہ بیٹری؛ غلط بیٹری کی تنصیب. | درست قطبیت کو یقینی بناتے ہوئے 9V بیٹری کو تبدیل کریں۔ |
| No LED activity during test. | Cable not properly connected; faulty cable; remote terminator not connected. | Ensure cables are securely connected to both the main unit and remote terminator. Test with a known good cable. |
| Buzzer sounds continuously or unexpectedly. | Short circuit or severe miswiring detected. | Examine the cable for physical damage or incorrect wiring. Check connectors for bent pins. |
| Inconsistent test results. | Loose connections; intermittent cable fault; low battery. | Ensure all connections are tight. Replace battery. Try wiggling the cable during test to identify intermittent faults. |
9. وضاحتیں
| ماڈل | LAN-1 |
| بجلی کی فراہمی | (1) 9V battery |
| بیٹری کی زندگی | Up to 20 hours of tests |
| کیبل کی اقسام کا تجربہ کیا گیا۔ | 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, Token Ring cables |
| Cable Connector Types | RJ45 and BNC |
| زیادہ سے زیادہ لائن کی لمبائی | 300m |
| وزن | 0.6 lb. / 0.27 kg (approx. 9.5 ounces) |
| طول و عرض (H x W x D) | 5.1 x 2.2 x 1.5 in. / 130 x 56 x 38mm |
| ڈسپلے | 18 LEDs (9 Red and 9 Green), 9 LEDs on Remote module |
| حفاظتی تعمیل | CE - EMC |
10. وارنٹی کی معلومات
دی Amprobe LAN-1 LAN Cable Tester comes with a ایک سال کی محدود وارنٹی. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, neglect, or unauthorized repair.
For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Amprobe customer support.
11. کسٹمر سپورٹ
If you have any questions, require technical assistance, or need to report a problem with your Amprobe LAN-1 LAN Cable Tester, please contact Amprobe customer support.
برائے مہربانی آفیشل سے ملیں۔ Ampلباس webتازہ ترین رابطے کی معلومات اور معاون وسائل کے لیے سائٹ۔
آن لائن وسائل: www.amprobe.com
