Lithonia Lighting Fluorescent Troffer Instruction Manual

تعارف

This manual provides essential instructions for the safe installation, operation, and maintenance of your Lithonia Lighting 2GT8 2 U316 A12 MVOLT GEB10IS Fluorescent Troffer. Please read all instructions carefully before proceeding with installation or use. Retain this manual for future reference.

حفاظتی معلومات

• فکسچر کو انسٹال کرنے، سروس کرنے یا صاف کرنے سے پہلے ہمیشہ سرکٹ بریکر سے بجلی منقطع کریں۔
• Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• یقینی بنائیں کہ بجلی کے ممکنہ جھٹکے سے بچنے کے لیے فکسچر مناسب طریقے سے گراؤنڈ کیا گیا ہے۔
• آتش گیر مواد کے قریب انسٹال نہ کریں۔
• تنصیب اور دیکھ بھال کے دوران مناسب ذاتی حفاظتی سامان (PPE) پہنیں۔

سیٹ اپ

تنصیب

The Lithonia Lighting 2GT8 troffer is designed for recessed installation in grid ceilings. Follow these general steps:

1. چھت کھولنے کی تیاری کریں: Ensure the ceiling grid opening matches the fixture dimensions (24 x 24 inches).
2. وائرنگ: Route electrical supply wires to the fixture location. Connect the fixture's wiring to the building's electrical system according to local codes. Ensure proper grounding.
3. چڑھنا: Carefully lift the troffer into the ceiling grid opening. The fixture is designed for lay-in grid installation. Secure the fixture to the grid using appropriate clips or hangers as required by local codes.
4. بلب کی تنصیب: Install two (2) U31W T8 fluorescent bulbs (not included) into the fixture's sockets. Ensure bulbs are seated correctly.
5. لینس کی تنصیب: Close and secure the hinged steel door with the acrylic patterned lens.

Refer to the mounting data and dimensions diagram below for detailed measurements and installation guidance.

Image: A technical diagram illustrating the mounting data and dimensions of the Lithonia Lighting 2GT8 troffer. It shows various measurements in inches and millimeters for the fixture's depth, width, and mounting points, along with a small diagram of a lay-in grid installation.

آپریٹنگ

بنیادی آپریشن

Once installed and wired correctly, the Lithonia Lighting 2GT8 troffer operates by a standard wall switch connected to the electrical circuit. Ensure the correct T8 fluorescent bulbs are installed before restoring power.

بلب کی تبدیلی

بلب تبدیل کرنے کے لیے:

1. پاور منقطع کریں: سرکٹ بریکر پر فکسچر کی بجلی بند کر دیں۔
2. Open Lens: Unlatch and open the hinged steel door to access the bulbs.
3. پرانے بلب کو ہٹا دیں: Carefully twist and remove the old T8 fluorescent bulbs.
4. Install New Bulbs: Insert new U31W T8 fluorescent bulbs, ensuring they are securely seated in the sockets.
5. Close Lens: Close and secure the hinged steel door.
6. بجلی کی بحالی: سرکٹ بریکر پر بجلی کو دوبارہ آن کریں۔

دیکھ بھال

صفائی

Regular cleaning helps maintain optimal light output and appearance.

• پاور منقطع کریں: صفائی سے پہلے ہمیشہ بجلی بند کر دیں۔
• صاف بیرونی: بیرونی سطحوں کو نرم سے صاف کریں، ڈیamp کپڑا کھرچنے والے کلینر سے پرہیز کریں۔
• صاف لینس: The acrylic patterned lens can be cleaned with a mild, non-abrasive cleaner specifically designed for plastics. Open the hinged door for easier access.
• Ensure all parts are dry before restoring power.

لینس کی تبدیلی

The hinged steel door allows for easy replacement of the acrylic patterned lens if it becomes damaged or discolored. Contact Lithonia Lighting customer support for replacement lens options.

خرابی کا سراغ لگانا

If you encounter issues with your fluorescent troffer, refer to the following common problems and solutions:

• لائٹ آن نہیں ہوتی:
  • چیک کریں کہ آیا سرکٹ بریکر پھٹ گیا ہے۔
  • Verify that bulbs are correctly installed and not faulty.
  • یقینی بنائیں کہ تمام وائرنگ کنکشن محفوظ ہیں۔
• ہلکی ہلکی پھلکی:
  • Replace old or faulty fluorescent bulbs.
  • Check for loose bulb connections.
  • A failing ballast may cause flickering; consult a qualified electrician for inspection.
• Reduced Light Output:
  • Clean the lens and bulbs to remove dust and debris.
  • Bulbs may be nearing the end of their lifespan and require replacement.

For persistent issues, contact customer support or a qualified electrician.

وضاحتیں

Key specifications for the Lithonia Lighting 2GT8 2 U316 A12 MVOLT GEB10IS Fluorescent Troffer:

For additional technical details, refer to the product datasheet below.

Image: A section of the Lithonia Lighting 2GT8 product datasheet, detailing features, specifications, and ordering information for various configurations of the 2GT8 series troffer, including the 2GT8 2 U316 A12 MVOLT GEB10IS model.

وارنٹی کی معلومات

This Lithonia Lighting product is covered by a 3 سال کی محدود وارنٹی. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official warranty documentation provided with your purchase or visit the Lithonia Lighting webسائٹ

کسٹمر سپورٹ

For technical assistance, replacement parts, or warranty claims, please contact Lithonia Lighting customer support.

• مینوفیکچرر: Acuity Brands Lighting Inc.
• آن لائن مدد: اہلکار کا دورہ کریں۔ Lithonia Lighting Store مزید معلومات اور وسائل کے لیے۔