SOLAS HR Titan 4 سٹینلیس سٹیل 4-بلیڈ پروپیلر صارف دستی

1. تعارف اور پروڈکٹ ختمview

This manual provides essential information for the proper installation, operation, and maintenance of your SOLAS HR Titan 4 Stainless Steel 4-Blade Propeller. Please read this manual thoroughly before installation and use to ensure safe and efficient performance.

This image displays the SOLAS HR Titan 4 propeller, featuring four highly polished stainless steel blades. The central hub, designed for shaft attachment, is visible with its internal splines, indicating a right-hand rotation propeller.

The SOLAS HR Titan 4 propeller is engineered for powerful thrust and smooth performance. Constructed from a high-grade stainless steel alloy with an optimal percentage of chromium, nickel, and molybdenum, it offers superior strength, corrosion resistance, and durability. Its high-rake and cupped-blade design contributes to excellent stern lift and acceleration, while also enhancing speed and fuel economy in the mid-range.

اہم خصوصیات:

• Powerful thrust and smooth performance
• Increased speed and economy in the mid-range
• Great stern lift and acceleration
• 14-1/8" Diameter, 19" Pitch
• دائیں ہاتھ کی گردش

2. حفاظتی معلومات

Always prioritize safety when handling and installing marine propellers. Failure to follow safety guidelines can result in serious injury or damage to equipment.

• انجن بند: Ensure the engine is completely off and the ignition key is removed before approaching the propeller.
• Secure Boat: Always secure the boat to prevent movement during propeller work.
• حفاظتی پوشاک: Wear appropriate protective gloves to prevent cuts from sharp propeller edges.
• صاف علاقہ: Keep hands, feet, and loose clothing clear of the propeller blades.
• پیشہ ورانہ تنصیب: If you are unsure about any step, consult a qualified marine technician.

3. سیٹ اپ اور انسٹالیشن

Proper installation is crucial for optimal performance and safety. Refer to your engine's service manual for specific torque specifications and additional instructions.

مطلوبہ اوزار:

• Propeller wrench or socket set
• Cotter pin pliers
• Grease (marine grade)
• New cotter pin (always use a new one)

تنصیب کے مراحل:

1. Ensure the engine is off and the boat is securely positioned.
2. Remove the old propeller (if applicable) by straightening and removing the cotter pin, then unscrewing the propeller nut. Carefully slide off the old propeller, thrust washer, and any other components.
3. Inspect the propeller shaft for any damage or corrosion. Clean the shaft thoroughly.
4. Apply a thin layer of marine-grade grease to the propeller shaft splines.
5. Slide the new SOLAS HR Titan 4 propeller onto the shaft, ensuring the splines align correctly.
6. Install the thrust washer, propeller nut, and any other components as per your engine manufacturer's instructions.
7. Tighten the propeller nut to the manufacturer's specified torque.
8. Insert a new cotter pin through the propeller nut and shaft hole, bending the ends to secure it. Never reuse an old cotter pin.
9. Verify that the propeller is securely fastened and rotates freely without obstruction.

4. آپریٹنگ ہدایات

The SOLAS HR Titan 4 propeller is designed for optimal performance. Observe the following guidelines during operation:

• ابتدائی ٹیسٹ: After installation, perform a cautious test run in calm waters to ensure proper function and no unusual vibrations.
• RPM رینج: Ensure your engine operates within its recommended wide-open throttle (WOT) RPM range with the new propeller. An incorrect RPM can lead to engine damage or inefficient performance.
• رکاوٹوں سے بچیں: Always be aware of your surroundings and avoid striking submerged objects, which can damage the propeller and lower unit.
• ٹرم ایڈجسٹمنٹ: Experiment with engine trim to find the optimal angle for your boat's load and water conditions, maximizing efficiency and speed.

5 دیکھ بھال

Regular maintenance extends the life and performance of your propeller.

• باقاعدہ معائنہ: Periodically inspect the propeller for nicks, bends, or cracks. Even minor damage can affect performance and fuel efficiency.
• صفائی: Clean the propeller regularly, especially after use in saltwater, to prevent corrosion and marine growth.
• Shaft Lubrication: Annually remove the propeller, clean the shaft, and reapply marine-grade grease to the splines to prevent corrosion and seizing. Always use a new cotter pin upon reinstallation.
• مرمت: If damage is found, have the propeller professionally repaired by a qualified propeller shop. Do not attempt to repair it yourself, as improper balancing can cause severe vibration and damage to your engine's lower unit.

6 خرابیوں کا سراغ لگانا

This section addresses common issues related to propeller performance.

عام مسائل اور حل:

7. وضاحتیں

8. وارنٹی اور سپورٹ

For information regarding product warranty, returns, or technical support, please contact SOLAS customer service directly or refer to the official SOLAS webسائٹ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔

While extended protection plans may be available from third-party providers, these are separate from the manufacturer's warranty.

مزید مدد کے لیے، براہ کرم ملاحظہ کریں۔ SOLAS official webسائٹ.