APC SMT2200RM2U 2200VA RM 2U LCD 120V Smart-UPS ہدایات دستی

1. تعارف

The APC SMT2200RM2U Smart-UPS is a 2200VA/1980W line-interactive uninterruptible power supply designed to provide reliable power protection for servers, storage, routers, and switches in network wiring closets and cabinets. This unit features a sine wave output, high-efficiency green mode, and includes serial and USB connectivity with a SmartSlot for accessory cards. It is designed for 2U rackmount installations.

اہم خصوصیات:

• 2U ریک ماؤنٹ ڈیزائن
• Sine Wave Output for sensitive electronics
• High-Efficiency Green Mode to save energy
• Serial & USB with SmartSlot for accessory cards
• خودکار جلدtagای ریگولیشن (اے وی آر)
• Hot-swappable batteries for easy maintenance

2. حفاظتی معلومات

Please read and understand all safety instructions before installing, operating, or maintaining the UPS. Failure to follow these instructions may result in serious injury or equipment damage.

عمومی حفاظت:

• یہ UPS صرف اندرونی استعمال کے لیے ہے۔
• UPS کو براہ راست سورج کی روشنی میں، سیالوں کے ساتھ رابطے میں، یا جہاں ضرورت سے زیادہ دھول یا نمی ہو۔
• UPS کے ارد گرد مناسب وینٹیلیشن کو یقینی بنائیں۔
• Do not open the UPS enclosure. There are no user-serviceable parts inside except for the battery.

برقی حفاظت:

• Connect the UPS power cable directly to a grounded wall outlet. Do not use extension cords or adapters.
• ان پٹ والیوم کو یقینی بنائیںtage of the UPS matches the local utility voltage (120V)۔
• Always disconnect the UPS from the utility power before performing any maintenance or service.
• Batteries can present a risk of electrical shock and high short-circuit current. Observe proper precautions.

3. جسمانی اوورview

فرنٹ پینل:

شکل 1: سامنے view of the APC SMT2200RM2U Smart-UPS. This image shows the front of the rackmount UPS unit, featuring the APC logo on the left, a ventilated grille across the center, and an LCD display panel with control buttons on the right. The display shows 'Smart-UPS 2200'.

The front panel features an LCD display that provides real-time status information and allows for configuration. Control buttons are located next to the display for navigation and selection.

ریئر پینل:

شکل 2: پیچھے view of the APC SMT2200RM2U Smart-UPS. This image displays the back of the UPS, showing various power outlets (NEMA 5-15R and NEMA 5-20R), an input power cord, communication ports (USB, Serial), and a SmartSlot for expansion cards. Overload protectors are also visible.

The rear panel includes the main power input, multiple NEMA 5-15R and NEMA 5-20R receptacles for connecting protected equipment, communication ports (USB and Serial), and a SmartSlot for network management cards or other accessories.

4. سیٹ اپ

ریک ماؤنٹنگ:

The SMT2200RM2U is designed for installation in a standard 19-inch equipment rack, occupying 2U of rack space. Ensure the rack is stable and capable of supporting the UPS's weight (approximately 110.7 pounds). Follow the rack manufacturer's instructions for proper mounting.

رابطے:

1. ان پٹ پاور کو جوڑیں: Plug the UPS's input power cord into a dedicated, grounded 120V AC outlet.
2. کنیکٹ کا سامان: Plug your critical equipment into the NEMA 5-15R and NEMA 5-20R outlets on the rear panel of the UPS. Distribute the load evenly across the available outlets.
3. مواصلاتی رابطے: Connect the provided USB or serial cable from the UPS to your server for power management software communication. Install an optional network management card into the SmartSlot for remote monitoring and control.
4. ابتدائی بیٹری چارج: Allow the UPS to charge for at least 24 hours before connecting critical loads to ensure full battery capacity.

5. آپریشن

پاور آن/آف:

• پاور آن کرنے کے لیے: سامنے والے پینل پر پاور بٹن کو دبائے رکھیں جب تک کہ LCD ڈسپلے روشن نہ ہو جائے۔
• پاور آف کرنا: Press and hold the power button until the UPS powers down. For a graceful shutdown of connected equipment, use the power management software.

LCD ڈسپلے اور کنٹرول:

The interactive LCD display provides comprehensive information about the UPS status and allows for various settings adjustments. Use the navigation buttons (up, down, enter, escape) to scroll through menus and select options.

ڈسپلے عام طور پر دکھاتا ہے:

• ان پٹ/آؤٹ پٹ والیومtage اور تعدد
• Battery Capacity and Charge State
• لوڈ فیصدtage and Power (Watts/VA)
• Estimated Runtime on Battery
• Operating Mode (On Utility, On Battery, Green Mode)
• کارکردگی
• Self-Test Results

خودکار جلدtagای ریگولیشن (اے وی آر):

UPS کی خصوصیات آٹومیٹک والیومtagای ریگولیشن (AVR) معمولی والیوم کو درست کرنے کے لیےtage fluctuations (sags and surges) without switching to battery power. This preserves battery life and ensures a stable power supply to your connected equipment.

6 دیکھ بھال

بیٹری کی تبدیلی:

The SMT2200RM2U is equipped with hot-swappable batteries, allowing for replacement without powering down connected equipment. Refer to the specific battery replacement instructions provided with your replacement battery kit (e.g., RBC133). Always use genuine APC replacement batteries.

صفائی:

وقتاً فوقتاً UPS کے بیرونی حصے کو خشک کپڑے سے صاف کریں۔ اس بات کو یقینی بنائیں کہ ہوا کے مناسب بہاؤ اور ٹھنڈک کو برقرار رکھنے کے لیے وینٹیلیشن کے دروازے دھول اور ملبے سے پاک ہوں۔

7 خرابیوں کا سراغ لگانا

If you encounter issues with your UPS, consult the LCD display for error messages or status indicators. Common issues and basic troubleshooting steps include:

• UPS not turning on: Check the input power connection and ensure the battery is properly connected and charged.
• Short runtime on battery: The battery may be old or not fully charged. Perform a battery self-test or consider battery replacement.
• اوورلوڈ الارم: Reduce the load connected to the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's capacity (1980W).
• No communication with software: Verify USB/serial cable connections and ensure the network management card (if installed) is properly configured and connected to the network.

For more detailed troubleshooting, refer to the comprehensive user manual available on the APC website or contact APC technical support.

8. وضاحتیں

9 پروڈکٹ ویڈیو ختمview

10. وارنٹی اور سپورٹ

وارنٹی کی معلومات، تکنیکی معاونت، یا سروس کے استفسارات کے لیے، براہ کرم شنائیڈر الیکٹرک کی طرف سے آفیشل اے پی سی دیکھیں website or contact their customer service department. Keep your product's model number (SMT2200RM2U) and serial number readily available when seeking support.