پروڈکٹ ختمview
The Klein Tools NCVT-2 is a dual-range non-contact voltage tester designed for automatically detecting both low voltagای اور معیاری والیومtage in electrical systems. It features visual and audible indicators to alert users to the presence of AC voltage, enhancing safety during electrical work. Its durable construction and compact design make it a reliable tool for professionals and DIY enthusiasts.
اہم خصوصیات:
- Automatic Dual-Range Detection: Automatically detects low voltage (12-48 VAC) and standard voltage (48-1000 VAC)۔
- Non-Contact Operation: محفوظ طریقے سے AC والیوم کا پتہ لگاتا ہے۔tagای کنڈکٹرز کے ساتھ براہ راست رابطے کے بغیر۔
- Visual and Audible Indicators: A bright green LED indicates the tester is operational. Flashing red LED and distinct warning tones signal voltagای کا پتہ لگانا
- Worklight Functionality: High-intensity green LED also functions as a worklight for illuminating dark areas.
- خودکار بند: Conserves and extends battery life.
- پائیدار تعمیر: Lightweight, durable polycarbonate plastic resin construction with 9.8-foot / 3 m drop protection.
- حفاظت کی درجہ بندی: CAT IV 1000V safety rating, conforms to CE requirements.
حفاظتی معلومات
انتباہ: Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- کبھی بھی یہ مت سمجھیں کہ غیر جانبدار یا زمینی تاروں کو غیر توانائی بخش دیا گیا ہے۔ ملٹی وائر برانچ سرکٹس میں نیوٹرلز منقطع ہونے پر انرجی ہو سکتے ہیں اور ہینڈلنگ سے پہلے ان کی دوبارہ جانچ کرنی چاہیے۔
- Always test on a known live circuit before and after use to ensure the tester is functioning correctly.
- Do not use if the tester appears damaged or is not operating properly.
- Adhere to all local and national safety codes.
سیٹ اپ
بیٹری کی تنصیب:
- Unscrew the cap at the rear of the tester.
- Insert two (2) 1.5V AAA Alkaline batteries, ensuring correct polarity (+/-).
- Securely screw the cap back onto the tester.
- Press the power button to confirm the green LED illuminates, indicating proper battery installation and functionality.
Figure 1: Klein Tools NCVT-2 Voltage Tester, showing the overall design and cap for battery access.
آپریٹنگ ہدایات
پاور آن/آف اور موڈ کا انتخاب:
- پاور آن کرنے کے لیے: Press and hold the power button for approximately 1 second. The green LED will illuminate, indicating the tester is ready for use in dual-range mode (12-1000 VAC).
- To Switch to Standard Voltage Only Mode: While the tester is on, press the power button briefly. The blue LED will turn off, and the green LED will remain on, indicating standard voltage detection (48-1000 VAC).
- To Switch Back to Dual-Range Mode: Press the power button briefly again. The blue LED will illuminate along with the green LED.
- پاور آف کرنا: Press and hold the power button until the LEDs turn off. The tester also features an auto power-off function after a period of inactivity to conserve battery life.
والیومtagای کا پتہ لگانا:
- Ensure the tester is powered on and the green LED is illuminated.
- Place the tip of the tester near the conductor, outlet slot, or insulated wire you wish to test.
- اگر AC والیومtage is detected, the red LED will flash, and an audible tone will sound. The frequency of the beeps and flashes increases as the tester gets closer to the voltagای ذریعہ
- کم والیوم کے لیےtage (12-48 VAC) detection, ensure the tester is in dual-range mode (green and blue LEDs illuminated).
- معیاری والیوم کے لیےtage (48-1000 VAC) detection, either dual-range mode or standard voltage only mode can be used.
Figure 2: Using the NCVT-2 to test for voltage الیکٹریکل آؤٹ لیٹ میں۔
Worklight Function:
- The high-intensity green LED at the tip of the tester can be used to illuminate the workspace, especially in dimly lit areas.
دیکھ بھال
- بیٹری کی تبدیلی: Replace batteries when the green LED fails to illuminate or the tester does not respond as expected. Refer to the 'Battery Installation' section for instructions.
- صفائی: Wipe the tester with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- ذخیرہ: ٹیسٹر کو براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور ٹھنڈی، خشک جگہ پر اسٹور کریں۔
خرابی کا سراغ لگانا
- Tester does not turn on: بیٹری کی تنصیب کو چیک کریں اور اگر ضروری ہو تو بیٹریاں تبدیل کریں۔
- متضاد ریڈنگز: Ensure the tester tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors or interference can sometimes affect readings.
وضاحتیں
| تفصیلات | قدر |
|---|---|
| برانڈ | کلین ٹولز |
| ماڈل نمبر | NCVT-2 |
| طاقت کا منبع | 2 x AAA 1.5V الکلین بیٹریاں (شامل) |
| کم از کم آپریٹنگ والیومtage | 12 وولٹ اے سی |
| زیادہ سے زیادہ آپریٹنگ والیومtage | 1000 وولٹ اے سی |
| حفاظتی درجہ بندی | کیٹ IV 1000V |
| ڈراپ پروٹیکشن | 9.8 فٹ / 3 میٹر |
| شے کا وزن | 0.8 اونس |
| مواد | Polycarbonate Plastic Resin |
| خصوصی خصوصیات | 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) |
وارنٹی اور سپورٹ
The Klein Tools NCVT-2 Voltage Tester comes with a 2 سال کی وارنٹی خریداری کی تاریخ سے.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Klein Tools webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔
Figure 3: Klein Tools NCVT-2 Voltage Tester, showcasing its dual-range capabilities and safety features.
