1. تعارف
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Hager ESC225S Silent Contactor. Please read this manual thoroughly before attempting any installation or operation. Retain this document for future reference.
2. پروڈکٹ ختمview
The Hager ESC225S is a silent contactor designed for switching electrical loads in various applications, particularly where quiet operation is desired. It features a 25 Amp current rating and two normally open (NO) contacts, operating at 230 Volts. Its compact design allows for integration into standard electrical panels.
ایک مفصل view of the Hager ESC225S Silent Contactor, showing its terminals, model number, and electrical ratings. The device is white with blue accents, indicating the Hager brand and model ESC 225, with ratings of 25A and U:250V visible on the label. Connection terminals A1, A2, 1, 2, 3, and 4 are clearly marked.
3. حفاظتی معلومات
- برقی خطرہ: تنصیب اور دیکھ بھال صرف اہل اور مجاز اہلکاروں کے ذریعہ انجام دی جانی چاہئے۔
- Always disconnect power to the circuit before installing, servicing, or removing the contactor.
- یقینی بنائیں کہ تمام وائرنگ مقامی اور قومی برقی کوڈز اور ضوابط کی تعمیل کرتی ہے۔
- آلہ کو نہ چلائیں اگر یہ خراب ہو یا نمی کے سامنے آ گیا ہو۔
- تنصیب اور دیکھ بھال کے دوران مناسب ذاتی حفاظتی سامان (PPE) استعمال کریں۔
4. انسٹالیشن اور سیٹ اپ
The Hager ESC225S Silent Contactor is designed for DIN rail mounting within an electrical enclosure.
4.1 چڑھنا
- Ensure the electrical panel is de-energized.
- Snap the contactor onto a standard 35mm DIN rail.
- Ensure it is securely fastened and does not wobble.
4.2 وائرنگ
Refer to the wiring diagram on the device and the following general guidelines:
- کنٹرول سرکٹ: کنٹرول والیوم کو مربوط کریں۔tage (230V AC) to terminals A1 and A2. A1 is typically the phase, and A2 is the neutral.
- مین سرکٹ: Connect the load circuit to the main power terminals. Terminals 1 and 3 are typically inputs, and terminals 2 and 4 are outputs for the two normally open (NO) contacts.
- اس بات کو یقینی بنائیں کہ ڈھیلے رابطوں اور زیادہ گرم ہونے سے بچنے کے لیے تمام کنکشن سخت اور محفوظ ہیں۔
- 25 کے لیے مناسب وائر گیجز کا استعمال کریں۔ Amp موجودہ درجہ بندی.
5. آپریشن
Once properly installed and wired, the Hager ESC225S Silent Contactor operates by receiving a control signal at its A1/A2 terminals. When the control voltage is applied, the internal coil is energized, closing the normally open contacts (1-2 and 3-4), thereby allowing power to flow to the connected load. When the control voltage is removed, the coil de-energizes, and the contacts open, interrupting the power to the load. The 'silent' characteristic refers to its low-noise switching operation.
6 دیکھ بھال
The Hager ESC225S Silent Contactor is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:
- بصری معائنہ: Annually inspect the contactor for any signs of physical damage, discoloration, or loose connections.
- صفائی: Ensure the device is free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- کنکشن چیک: Periodically verify that all terminal screws are tight.
کسی بھی دیکھ بھال کو انجام دینے سے پہلے ہمیشہ بجلی منقطع کریں۔
7 خرابیوں کا سراغ لگانا
If the contactor is not functioning as expected, consider the following:
| علامت | ممکنہ وجہ | ایکشن |
|---|---|---|
| Contactor does not switch on | کوئی کنٹرول والیوم نہیں۔tage to A1/A2; Incorrect wiring; Faulty control circuit; Contactor failure | کنٹرول والیوم چیک کریں۔tage supply; Verify A1/A2 wiring; Test control circuit components; Replace contactor if faulty. |
| Contactor does not switch off | کنٹرول والیومtage continuously applied; Contacts welded shut; Contactor failure | مسلسل والیوم کے لیے کنٹرول سرکٹ چیک کریں۔tage; Disconnect power and inspect contacts; Replace contactor if faulty. |
| زیادہ گرم ہونا | Overload; Loose connections; Insufficient ventilation | Reduce load; Tighten all terminal connections; Ensure adequate airflow in the enclosure. |
For issues not resolved by these steps, contact a qualified electrician or Hager technical support.
8. وضاحتیں
| فیچر | تفصیلات |
|---|---|
| ماڈل نمبر | ESC225S |
| برانڈ | ہیگر |
| Rated Current (AC Adapter Current) | 25 Amps |
| شرح شدہ جلدtage | 230 V (Control voltage on device label: 250V) |
| رابطوں کی تعداد | 2 Normally Open (2 NO) |
| مواد | کاپر ایلومینیم |
| پروڈکٹ کے طول و عرض (L x W x H) | 2.36" x 0.7" x 3.27" (60 x 17.8 x 83 ملی میٹر) |
| وزن | 3.53 اونس (تقریباً 100 گرام) |
| چڑھنے کی قسم | DIN ریل |
| ASIN | B005ZCP5RG |
9. وارنٹی اور سپورٹ
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your authorized Hager distributor. Technical support and further assistance can be obtained through the official Hager website or your local service representative.
ہیگر آفیشل Webسائٹ: www.hager.com
