Candy 92130871 Washing Machine Replacement Belt Instruction Manual

1. تعارف

This instruction manual provides essential information for the proper installation, maintenance, and troubleshooting of the Candy 92130871 washing machine replacement belt. Please read this manual thoroughly before attempting any installation or repair to ensure safe and effective operation.

2. حفاظتی معلومات

• Always disconnect the washing machine from the power supply before attempting any installation, maintenance, or repair work. Failure to do so can result in electric shock or serious injury.
• چوٹ سے بچنے کے لیے مناسب ذاتی حفاظتی سامان، جیسے دستانے پہنیں۔
• اگر آپ کو کسی بھی قدم کے بارے میں یقین نہیں ہے تو، ایک قابل ٹیکنیشن سے مشورہ کریں.
• Keep children and pets away from the appliance during repair.
• Ensure all tools are in good condition and used correctly.

3. پروڈکٹ ختمview

The Candy 92130871 is an authentic replacement drive belt designed for various Candy washing machine models. This belt is crucial for transmitting power from the motor to the drum, enabling the washing machine to operate correctly.

Image 1: The Candy 92130871 washing machine replacement belt. This image shows the black rubber belt, typically ribbed on one side for grip.

4 مطابقت

This replacement belt (Manufacturer Code: 92130871) is compatible with a wide range of Candy washing machine models. Please verify your washing machine's model number against the list below to ensure proper fitment.

ہم آہنگ ماڈلز میں شامل ہیں:

• CANDY AC16, ACTIVA50, ACTIVA51, ACTIVA60, ACTIVA61, ACTIVA64SLIM, ACTIVA66SL, ACTIVA6CI
• ALISE060, ALISE065, ALISE066, ALISE'160XT, ALISE190X, ALISE6190X0, ALISE'.610B, ALISE'65 ARG, ALISE'650, ALISE'696
• AQUAV.6, AQUAVIVA60, AQUAVIVA63, AQUAVIVA650, AQUAVIVA66
• C36ZXT, C532, C535T, C536T, C55XT (I), C564XT plata, C577T, C588XT, C58XT (I), C6077T, XT AQUAM, CM.608XT (I)
• C616XT (I), C625XT, C634XT, C634XT (CE), C634XT (NORD), C636XT, C647XT (I), C657XT (I)
• CB52T, CB52TCKD, CB53XTR, CB612XT, CB613TR, CB623XTTR HC, CB62T, CB62TR, CB633XTR, CB634XT, CB63TES, CB63TR, CB63TRCKD, CB63XTR
• CE520T, CE530, CE615, CE621T, CE623R, CE625TR, CE629T, CE637XT, CE650TR
• CG5444T, CG5544T, CG623T, CG644.3T, CG644T, CG654XT, CGAQ665XT
• CH630, CHIARA51XT, CHIARA540XTR, CHIARA552TR, CHIARA55XTR, CHIARA5XT, CHIARA5XTV, CHIARA642XTR, CHIARA65XTR, CHIARA65XT, CHIARA65XTV, CHIARA65XTR, CHIARA65X2XTR, CHIARA6XT
• CI50XTR, CI537T, CI57TR, CI589XT, CI60XTR, CI60XTR H/C, CI620TP, CI622T, CI624T, CI626XT, CI627T, CI637T, CI648XT, CI658XT
• CJ6514, CJ543T, CJ613XT, CJ643T, CJA52T
• CL66XT, CN50T, CN50T-04S, CN60T, CN63T, CN63T CI, CN63TCKD, CN63TRU-03S
• IPC 610, CR61, CS47XT (I), CSB640XTR, CSE640XTR, CSE615XT, CM.SE635XT, CSG624T, CSI615T, CSI635XTR, CSI635XTRSY, CSN62T, CSN62T-03S
• EXCL.S641XTR, EXCLUS.60, EXCLUS.6000, EXCLUS540XTR, EXCLUS65XTR
• HOL165XTR, HOL62, VACANZAS 6, HOLIDAY161, HOLIDAY60, HOLIDAY603, HOLIDAY61
• ICL60T, LADYC.623CKD, SEL.S643XTR, SELEC 0.631 XTR, SELECTA600, SELECTA60X, SELECTA61XXTR
• SL5000EXC, SL50EXCLUS., SLIM644AQUAV, SLIMMY508XT, SLIMMY634XT, SLIMMY655XT, SLIMMY6AQUAV, SLIMMYCB62XT, WM601.

5. تنصیب (سیٹ اپ)

Replacing a washing machine drive belt requires careful attention. Follow these general steps. Specific machine designs may vary, so refer to your washing machine's primary service manual if available.

1. تیاری:
   • واشنگ مشین کو مین پاور سپلائی سے منقطع کریں۔
   • مشین کو پانی کی فراہمی بند کر دیں۔
   • Pull the washing machine away from the wall to access the rear panel.
2. بیلٹ تک رسائی:
   • واشنگ مشین کے پچھلے رسائی پینل کو محفوظ کرنے والے پیچ کو تلاش کریں اور ہٹا دیں۔
   • Carefully remove the panel to expose the motor, drum pulley, and the old belt (if still present).
3. پرانی بیلٹ کو ہٹا دیں:
   • If the old belt is still partially attached, carefully pry it off the motor pulley and then the larger drum pulley. Note its orientation.
4. نیا بیلٹ انسٹال کریں:
   • First, loop the new Candy 92130871 belt around the smaller motor pulley.
   • Next, partially loop the belt around the larger drum pulley.
   • While holding the belt firmly on the motor pulley and partially on the drum pulley, slowly rotate the drum pulley by hand. The belt should gradually roll onto the drum pulley until it is fully seated. Ensure the ribbed side of the belt (if applicable) faces the pulleys correctly.
   • Check that the belt is centered on both pulleys and has proper tension. It should be snug but allow for a small amount of flex.
5. دوبارہ جوڑنا:
   • Replace the rear access panel and secure it with the screws.
   • Push the washing machine back into its position.
   • Reconnect the power supply and water supply.
6. ٹیسٹ:
   • Run a short, empty wash cycle to ensure the belt operates smoothly and quietly.

6 دیکھ بھال

Regular inspection of the drive belt can help prevent future issues and extend the life of your washing machine.

• متواتر معائنہ: Every 1-2 years, or if you notice unusual noises or performance issues, inspect the belt for signs of wear, cracking, fraying, or stretching.
• مناسب تناؤ: Ensure the belt maintains proper tension. A loose belt can slip, causing the drum to not spin or spin intermittently. An overly tight belt can put undue stress on the motor and drum bearings.
• صفائی: Keep the area around the motor and pulleys free from lint, debris, and moisture, which can affect belt performance and lifespan.

7 خرابیوں کا سراغ لگانا

اگر خرابیوں کا سراغ لگانے کے اقدامات سے مسئلہ حل نہیں ہوتا ہے، تو یہ سفارش کی جاتی ہے کہ کسی اہل آلات تکنیشین سے رابطہ کریں۔

8. وضاحتیں

• برانڈ: کینڈی
• ماڈل نمبر: 92130871
• مصنوعات کی قسم: Washing Machine Replacement Belt
• ہم آہنگ آلات: واشنگ مشین
• پیکیج کے طول و عرض: 30 x 20 x 3 سینٹی میٹر (تقریباً)
• پروڈکٹ وزن: 100 جی (تقریبا)

9. وارنٹی اور سپورٹ

For information regarding warranty coverage, technical support, or to purchase additional parts, please refer to the official Candy webسائٹ یا ان کے کسٹمر سروس ڈیپارٹمنٹ سے رابطہ کریں۔ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔

Official Candy Webسائٹ: www.candy-group.com