1. تعارف
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Legrand E14 Lamp Holder, model LEG91123. This product is designed for use with E14 screw-base bulbs, with a maximum wattage of 60W and operating at 230 Volts.
2. حفاظتی معلومات
WARNING: Risk of electric shock. Always disconnect power at the main circuit breaker before installing or servicing electrical components.
- Installation should only be performed by a qualified electrician or competent person.
- Ensure the power supply is completely off before beginning any work.
- زیادہ سے زیادہ ریٹیڈ واٹ سے تجاوز نہ کریں۔tage of 60W for the connected bulb.
- تصدیق کریں کہ تمام کنکشن محفوظ اور مناسب طریقے سے موصل ہیں۔
- This product is designed for indoor use in dry locations only.
3. مصنوعات کے اجزاء
The Legrand E14 Lamp Holder consists of several parts designed for secure and reliable bulb connection.
Figure 3.1: Complete Legrand E14 Lamp Holder. This image shows the complete Legrand E14 lamp holder, featuring the threaded body for bulb insertion and the base for electrical connection.
Figure 3.2: Legrand E14 Lamp Holder disassembled. This image illustrates the main components of the Legrand E14 lamp holder, including the outer casing, internal mechanism, and shade ring.
- بیرونی سیasing: Made of white polyamide material, providing insulation and protection.
- اندرونی میکانزم: Contains the electrical contacts and wiring terminals.
- Shade Ring: Used to secure a lampایل پر سایہamp ہولڈر
4. تنصیب کی ہدایات
Follow these steps for proper installation of the Legrand E14 Lamp ہولڈر۔
- وائرنگ تیار کریں: Ensure the power supply is disconnected. Strip approximately 8-10mm of insulation from the ends of the electrical wires.
- رسائی ٹرمینلز: Lamp holder's internal mechanism may need to be partially disassembled to access the wiring terminals. Refer to Figure 3.2 for component identification.
- تاروں کو جوڑیں: Insert the stripped wire ends into the designated terminals. The wire entry can be from the side or via a screw connection. Secure the wires firmly by tightening the terminal screws. Ensure no loose strands are present.
Figure 4.1: Internal wiring terminals. This image displays the internal wiring terminals of the Legrand E14 lamp holder, where electrical wires are connected.
- دوبارہ جوڑنا: Carefully reassemble the lamp holder components, ensuring all parts are correctly aligned and secured.
- چڑھنا: Lamp holder is designed for installation on a Ø10 male connector. Secure the lamp holder to the fixture using the appropriate mounting method.
- Attach Shade Ring (Optional): اگر al کا استعمال کریں۔ampshade, slide the shade ring over the threaded part of the lamp holder and tighten it to secure the lampسایہ
5. آپریشن
Once installed, operating the lamp holder is straightforward:
- بلب ڈالیں: Gently screw an E14 screw-base bulb into the lamp ہولڈر کو اس وقت تک رکھیں جب تک کہ یہ چپک نہ جائے۔ زیادہ تنگ نہ کریں۔
- بجلی کی بحالی: Turn on the power supply at the main circuit breaker.
- ٹیسٹ: Activate the light switch to confirm proper operation.
6 دیکھ بھال
The Legrand E14 Lamp Holder requires minimal maintenance.
- صفائی: Disconnect power before cleaning. Wipe the exterior with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- معائنہ: وقتا فوقتا ایل کا معائنہ کریں۔amp holder for any signs of damage, wear, or loose connections. If any issues are found, disconnect power and address them immediately.
- بلب کی تبدیلی: Always disconnect power before replacing a bulb. Allow the old bulb to cool completely before removal.
7 خرابیوں کا سراغ لگانا
اگر آپ کو اپنے ایل کے ساتھ مسائل کا سامنا کرنا پڑتا ہے۔amp holder, refer to the following common problems and solutions:
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| لائٹ آن نہیں ہوتی | بجلی کی فراہمی نہیں ہے۔ | سرکٹ بریکر اور وال سوئچ چیک کریں۔ |
| لائٹ آن نہیں ہوتی | ناقص بلب | Replace the bulb with a new, working E14 bulb (max 60W). |
| لائٹ آن نہیں ہوتی | ڈھیلا وائرنگ کنکشن | Disconnect power and check all wire connections within the lamp holder. Tighten if necessary. |
| چمکتی ہوئی روشنی | ڈھیلا بلب یا کنکشن | Ensure the bulb is screwed in tightly. Disconnect power and check wiring connections. |
8. تکنیکی تفصیلات
- برانڈ: Legrand
- ماڈل نمبر: ایل ای جی 91123
- بلب کی قسم: E14 Screw-base
- مواد: Polyamide-Imide
- رنگ: سفید
- والیومtage: 230 وولٹ
- زیادہ سے زیادہ طاقت: 60 واٹ
- پروڈکٹ کے طول و عرض (L x W x H): 3 x 3 x 6 سینٹی میٹر
- وزن: 50 گرام
- چڑھنے کی قسم: For Ø10 male connector
- مطابق نردجیکرن: NF
- اصل ملک: چین
9. وارنٹی اور سپورٹ
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Keep your proof of purchase for warranty claims.
