1. تعارف
This manual provides comprehensive instructions for the safe and effective use of the Freestyle Lite Blood Glucose Monitoring System. Please read this manual thoroughly before using the device for the first time and keep it for future reference. This system is designed for self-testing of blood glucose levels by people with diabetes at home.
Image 1.1: Packaging of the Freestyle Lite Blood Glucose Monitoring System, showing the meter and test strips.
2. حفاظتی معلومات
Always follow basic safety precautions when using electrical products, especially when children are present. This device is for وٹرو میں diagnostic use only. Do not use for the diagnosis of diabetes. Consult your healthcare professional for interpretation of results.
- Keep the device and all accessories out of reach of young children.
- Do not use the system if it appears damaged.
- استعمال شدہ نشتر اور ٹیسٹ سٹرپس کو تیز کنٹینر میں مناسب طریقے سے ٹھکانے لگائیں۔
- Do not share lancets or lancing devices.
3. پیکیج کے مشمولات
Verify that all items are present in your Freestyle Lite Blood Glucose Monitoring System package:
- Freestyle Lite Blood Glucose Meter
- Freestyle Lite Test Strips (quantity as per package)
- لینسنگ ڈیوائس
- Lancets (quantity as per package)
- Control Solution (optional, may be sold separately)
- کیرینگ کیس
- مالک کا دستورالعمل (یہ دستاویز)
- فوری حوالہ گائیڈ
4. سیٹ اپ
4.1. بیٹریاں نصب کرنا
The Freestyle Lite meter uses two 3-volt lithium button cell batteries (CR2032). To install or replace batteries:
- میٹر کے پچھلے حصے میں بیٹری کے کمپارٹمنٹ کور کو تلاش کریں۔
- Use a small coin to open the battery cover by turning it counter-clockwise.
- Insert the batteries with the positive (+) side facing up.
- Replace the battery cover and turn clockwise to secure.
4.2 تاریخ اور وقت کی ترتیب
It is important to set the correct date and time for accurate record-keeping. Refer to the Quick Reference Guide or the meter's on-screen prompts for detailed instructions on setting these parameters.
4.3. Preparing the Lancing Device
- لانسنگ ڈیوائس کیپ کو کھولیں۔
- لینسیٹ ہولڈر میں مضبوطی سے نیا لینسیٹ داخل کریں۔
- لینسیٹ کی حفاظتی ٹوپی کو موڑ دیں۔
- لانسنگ ڈیوائس کیپ کو تبدیل کریں۔
- Adjust the penetration depth setting on the lancing device (start with a lower setting and adjust as needed).
- Pull back the cocking mechanism until it clicks. The device is now ready to use.
5. آپریٹنگ ہدایات
5.1. Performing a Blood Glucose Test
Follow these steps to perform a blood glucose test:
- Wash your hands with soap and warm water, then dry them thoroughly.
- Remove a Freestyle Lite Test Strip from its vial and immediately close the vial cap tightly.
- Insert the test strip into the meter's test strip port. The meter will turn on automatically.
- When the blood drop symbol appears on the display, use the prepared lancing device to prick the side of your fingertip.
- خون کا ایک چھوٹا قطرہ بنانے کے لیے اپنی انگلی کو آہستہ سے نچوڑیں۔
- Touch the tip of the test strip to the blood drop. The blood will be drawn into the strip.
- Hold the strip to the blood drop until the meter beeps and the countdown begins.
- Your blood glucose result will appear on the display in approximately 5 seconds.
- Remove the used test strip from the meter and dispose of it properly.
- Dispose of the used lancet in a sharps container.
5.2. کنٹرول حل ٹیسٹنگ
Control solution testing verifies that the meter and test strips are working correctly. Perform a control solution test when:
- آپ ٹیسٹ سٹرپس کی ایک نئی شیشی کھولتے ہیں۔
- You suspect the meter or test strips are not working correctly.
- You have dropped the meter.
- Your test results do not match how you feel.
Refer to the control solution instructions for specific procedures and acceptable ranges.
6 دیکھ بھال
6.1 میٹر کی صفائی
Clean the exterior of the meter regularly with a soft, damp cloth. Do not immerse the meter in water or use harsh cleaning agents. Ensure no liquid enters the test strip port.
6.2. ذخیرہ
Store the Freestyle Lite meter and test strips in a cool, dry place, away from direct sunlight and extreme temperatures. Keep test strips in their original vial with the cap tightly closed. Do not refrigerate.
7 خرابیوں کا سراغ لگانا
If you encounter issues with your Freestyle Lite Blood Glucose Monitoring System, refer to the table below for common problems and solutions.
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| میٹر آن نہیں ہوتا۔ | Dead batteries or incorrect battery insertion. | درست قطبیت کو یقینی بناتے ہوئے بیٹریاں تبدیل کریں۔ |
| خرابی کا پیغام ظاہر ہوا۔ | Improper test strip insertion, insufficient blood sample, or damaged strip. | Refer to the meter's manual for specific error codes. Re-insert strip correctly, apply sufficient blood, or use a new strip. |
| نتائج غلط معلوم ہوتے ہیں۔ | Expired test strips, improper storage, or control solution needed. | Check strip expiry date. Ensure proper storage. Perform a control solution test. Consult healthcare professional. |
مزید مدد کے لیے، کسٹمر سپورٹ سے رابطہ کریں۔
8. وضاحتیں
- پیمائش کی حد: 20-500 mg/dL (1.1-27.8 mmol/L)
- Sampلی سائز: 0.3 microliters
- ٹیسٹ کا وقت: تقریباً 5 سیکنڈ
- یادداشت: Stores up to 400 results with date and time
- بیٹری کی قسم: Two 3-volt lithium button cell batteries (CR2032)
- بیٹری کی زندگی: تقریباً 1000 ٹیسٹ
- آپریٹنگ درجہ حرارت: 50°F سے 104°F (10°C سے 40°C)
- آپریٹنگ نمی: 10% سے 90% (غیر گاڑھا)
- طول و عرض: (Refer to product packaging for exact dimensions, typically compact)
- وزن: (Refer to product packaging for exact weight, typically light)
نوٹ: وضاحتیں بغیر اطلاع کے تبدیل کی جاسکتی ہیں۔
9. وارنٹی اور سپورٹ
The Freestyle Lite Blood Glucose Monitoring System typically comes with a limited warranty. Please refer to the warranty card included in your product package for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase.
کسٹمر سپورٹ:
For technical assistance, product inquiries, or to report any issues, please contact Freestyle customer support:
- Webسائٹ: www.freestyle.com (This is a placeholder, actual URL مختلف ہو سکتے ہیں)
- فون: 1-800-XXX-XXXX (This is a placeholder, actual number may vary)
Please have your meter's serial number ready when contacting support.
