WFLY X9 RC Car Radio Instruction Manual

1. تعارف

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. پروڈکٹ ختمview

2.1 کلیدی خصوصیات

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 باکس میں کیا ہے۔

• WFLY X9 Transmitter
• RG206S Receiver

2.3 پروڈکٹ کے اجزاء

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

شکل 2: تفصیلی view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltagای، خارجی جلدtage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. سیٹ اپ

3.1 ٹرانسمیٹر بیٹری کی تنصیب

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. بیٹری کے ٹوکری کا احاطہ کھولیں۔
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔

Note: The transmitter supports a working voltagای رینج 3.5V سے 6.0V تک۔

3.2 وصول کنندہ کنکشن

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltagای رینج 3.5V سے 9.0V تک۔

3.3 پابند کرنے کا طریقہ کار

To establish communication between the transmitter and receiver, a binding process is required:

1. ٹرانسمیٹر اور رسیور دونوں کو بند کر دیں۔
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Initiate the binding process from the transmitter.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. آپریشن

4.1 بنیادی کنٹرولز

• سٹیئرنگ وہیل: Controls the left/right direction of your RC vehicle.
• تھروٹل ٹرگر: آگے کو تیز کرنے کے لیے کھینچیں، بریک یا ریورس کرنے کے لیے دھکیلیں۔
• ٹرم: Adjust the neutral position of steering and throttle channels for fine-tuning.
• D/R (Dual Rate): Adjusts the maximum throw of steering or other channels.

4.2 ٹچ اسکرین نیویگیشن

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• اصل پردہ: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• مینو بٹن: مین ترتیبات کے مینو تک رسائی حاصل کرتا ہے۔
• صارف مینو: Customizable shortcuts for frequently used functions.
• ماڈل کا انتخاب: Select from up to 40 stored models, each with its own unique settings.

4.3 اعلی درجے کے افعال

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• صوتی نشریات: Enable voice prompts for telemetry data or system alerts.
• GPS Support: When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Channel Limit: Protect your servos and mechanical components by setting maximum travel limits for each channel.

5 دیکھ بھال

5.1 ٹرانسمیٹر چارج کرنا

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 صفائی ستھرائی اور ذخیرہ

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Remove batteries from the transmitter if storing for extended periods to prevent leakage.

5.3 فرم ویئر اپ گریڈ

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6 خرابیوں کا سراغ لگانا

6.1 عام مسائل

7. وضاحتیں

7.1 Transmitter (WFLY X9)

• کام کرنے والی جلدtage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• موجودہ کام: 260~400mA
• تعدد ہاپنگ: ایف ایچ ایس ایس۔
• ماڈیولیشن: لورا
• درخواست: RC cars, boats, tanks, robots, etc.
• قرارداد: 4096
• تعدد بینڈ: 2.4GHz (دو طرفہ)
• ٹرانسمیشن پاور: ≤100 میگاواٹ
• حد: >600m (ideal conditions)
• آپریٹنگ درجہ حرارت: -10℃ سے +60℃
• Simulator Interface: 3.5mm (PPM)
• ذخیرہ: 40 ماڈل میموری
• Program Mix: 5 ماڈل
• صوتی نشریات: حمایت
• چارج کرنا: Support 1S LiPo battery (Type C)
• زبان: انگریزی
• اپ گریڈ کریں: USB online upgrade
• امدادی: حمایت
• ڈسپلے: 3.5” 480*320 capacitive touch screen
• طول و عرض: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• وزن: 318 گرام

7.2 Receiver (RG206S)

• ماڈل کا نام: RG206S
• چینلز: 6 channels (PWM)
• موجودہ کام: 95mA
• تعدد بینڈ: 2.4GHz (two-way transmission)
• کام کرنے والی جلدtage: 3.5V~9.0V
• ماڈیولیشن: لورا
• GPS: Support speed detection
• درخواست: RC cars, boats, tanks, robots, etc.
• قرارداد: Full channel 4096
• آپریٹنگ درجہ حرارت: -10℃ سے +60℃
• بیرونی جلد۔tagای کا پتہ لگانا: DC 1~36V
• پی پی ایم: Support 180/270°
• W.BUS: Support S.BUS
• اپ گریڈ کریں: USB online upgrade
• طول و عرض: 33.6 x 22.3 x 12.3 ملی میٹر
• وزن: 7.6 گرام

7.3 جسمانی طول و عرض

• Product Dimensions (Transmitter): 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• شے کا وزن (کل): 1.54 پاؤنڈ

8. وارنٹی اور سپورٹ

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's webوارنٹی تفصیلات کے لئے سائٹ.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.