1. تعارف
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. حفاظتی معلومات
- پاور اڈاپٹر: A 12V DC power adapter is شامل نہیں and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- واٹtage: کل واٹtage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- حرارت: The LED strip operates at an extremely low heat, making it safe to touch.
- پانی کی مزاحمت: یہ پروڈکٹ ہے۔ غیر پنروک and intended for indoor use only. Avoid exposure to water or high humidity.
- ہینڈلنگ: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- کاٹنا: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. پیکیج کے مشمولات
تصدیق کریں کہ آپ کے پیکیج میں تمام اجزاء موجود ہیں:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. وضاحتیں
| فیچر | تفصیل |
|---|---|
| ماڈل نمبر | 4100057-WW |
| ہلکی قسم | LED Strip Light (SMD 2835) |
| لمبائی | 16.4 فٹ (5 میٹر) |
| ہلکا رنگ | گرم سفید |
| رنگین درجہ حرارت | 3000 کیلون |
| والیومtage | ڈی سی 12V |
| واٹtage | 18 واٹ |
| برائٹ فلوکس | 1200 Lumens |
| ایل ای ڈی کی تعداد | 300 |
| dimmable | No (Not Dimmable) |
| انڈور / آؤٹ ڈور استعمال | صرف انڈور |
| مواد | سلیکون |
| شے کا وزن | 60 گرام (2.12 اونس) |
توانائی کی کارکردگی
Figure 4.1: Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/1056793.
5. سیٹ اپ ہدایات
5.1 اجزاء ختمview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 تنصیب کے مراحل
- سطح تیار کریں: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- پیمائش اور کٹ (اختیاری): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- پٹی لگائیں: Peel off the protective backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- پاور سے رابطہ کریں: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. آپریٹنگ ہدایات
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is dimmable نہیں and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Product in Use
شکل 6.1: سابقample of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 ویڈیو ڈیموسٹریشن
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7 دیکھ بھال
- صفائی: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- ہینڈلنگ: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- ذخیرہ: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8 خرابیوں کا سراغ لگانا
| مسئلہ | ممکنہ وجہ | حل |
|---|---|---|
| ایل ای ڈی کی پٹی روشن نہیں ہوتی ہے۔ | کوئی طاقت نہیں، غلط والیومtage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| Adhesive is not holding the strip. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. وارنٹی اور سپورٹ
9.1 وارنٹی کی معلومات
This Lepro LED Strip Light comes with a 2 سال کی وارنٹی from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 کسٹمر سپورٹ
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro webرابطے کی معلومات کے لیے سائٹ۔
