BEMKO A31-BL01A-MID A30-BM030-L 3-فیز 5(80)ایک الیکٹرک میٹر صارف دستی

1. تعارف

This manual provides detailed instructions for the safe and efficient use of the BEMKO A31-BL01A-MID A30-BM030-L 3-Phase 5(80)A Electric Meter. This device is designed for measuring active energy consumption in three-phase electrical systems. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

The BEMKO A30-BM030-L is a certified (CE) energy monitor suitable for DIN rail mounting, offering reliable measurement with a clear LCD display.

2. اہم حفاظتی معلومات

• برقی خطرہ: Installation and maintenance should only be performed by qualified personnel. Ensure power is disconnected before any work on the meter or associated wiring.
• مناسب استعمال: Use this device only for its intended purpose of measuring electrical energy. Do not use it for purposes other than specified.
• ماحولیاتی حالات: Do not expose the meter to extreme temperatures, humidity, or corrosive environments beyond its specified operating range (-10 °C to +45 °C, IP20).
• نقصان: Do not install or operate the meter if it appears damaged. Contact the supplier for assistance.
• ترامیم: Do not attempt to open, modify, or repair the meter. This will void the warranty and may pose a safety risk.

3. پروڈکٹ ختمview

The BEMKO A30-BM030-L is a compact 3-phase electric meter designed for easy integration into electrical panels. It features a digital LCD display for energy readings and is built for durability and accuracy.

شکل 3.1: سامنے view of the BEMKO A30-BM030-L 3-Phase Electric Meter, showing the LCD display and branding.

3.1 کلیدی اجزاء

• LCD ڈسپلے: Shows energy consumption in kWh (6+2 digits).
• Pulse Output Indicator: An LED that flashes to indicate energy pulses (1000 imp/kWh).
• ٹرمینلز: Input (IN) and Output (OUT) terminals for connecting the three phases (L1, L2, L3) and neutral (N).
• DIN Rail Clip: For secure mounting on a 35mm DIN rail.

4. تکنیکی تفصیلات

Figure 4.1: Dimensional drawing of the BEMKO A30-BM030-L electric meter, showing length (116.5 mm), width (76.0 mm), and depth (65 mm).

شکل 4.2: سائیڈ پروfile of the BEMKO A30-BM030-L electric meter, highlighting the DIN rail mounting mechanism and a depth of 36.0 mm from the mounting surface.

5. تنصیب کی ہدایات

The BEMKO A30-BM030-L electric meter is designed for installation on a standard 35mm DIN rail. Ensure all safety precautions are followed before beginning installation.

5.1 چڑھنا

1. پاور منقطع کریں: Ensure the main power supply to the installation area is completely disconnected and locked out.
2. مقام منتخب کریں: Choose a dry, well-ventilated location within the specified operating temperature range (-10 °C to +45 °C) and IP20 protection.
3. Mount on DIN Rail: Clip the meter onto a standard 35mm DIN rail. Ensure it is securely fastened.

5.2 وائرنگ

Refer to the wiring diagram below for correct connection of the three-phase and neutral lines. Incorrect wiring can damage the meter or pose a safety hazard.

Figure 5.1: Wiring diagram for the BEMKO A30-BM030-L 3-Phase Electric Meter. Terminals 1, 3, 5, 7 are for input (IN) L1, L2, L3, N respectively. Terminals 2, 4, 6, 8 are for output (OUT) L1, L2, L3, N respectively.

تصویر 5.2: کلوز اپ view of the terminal blocks on the BEMKO A30-BM030-L electric meter, showing connections for phases and neutral.

1. Connect the incoming Phase 1 (L1) to terminal 1.
2. Connect the outgoing Phase 1 (L1) to terminal 2.
3. Connect the incoming Phase 2 (L2) to terminal 3.
4. Connect the outgoing Phase 2 (L2) to terminal 4.
5. Connect the incoming Phase 3 (L3) to terminal 5.
6. Connect the outgoing Phase 3 (L3) to terminal 6.
7. Connect the incoming Neutral (N) to terminal 7.
8. Connect the outgoing Neutral (N) to terminal 8.
9. اس بات کو یقینی بنائیں کہ ڈھیلے رابطوں اور زیادہ گرم ہونے سے بچنے کے لیے تمام کنکشن سخت اور محفوظ ہیں۔
10. After wiring, double-check all connections against the diagram before restoring power.

6. آپریٹنگ ہدایات

Once properly installed and powered, the BEMKO A30-BM030-L electric meter will automatically begin measuring energy consumption.

Figure 6.1: Close-up of the BEMKO A30-BM030-L LCD display, showing the 6+2 digit energy reading in kWh.

6.1 ڈسپلے کو پڑھنا

• The LCD displays the total active energy consumed in kilowatt-hours (kWh).
• The display format is 6+2 digits, meaning six digits for whole kWh and two digits for decimal kWh (e.g., 000000.01 kWh).

6.2 پلس آؤٹ پٹ

• The meter features an LED indicator that flashes at a rate of 1000 pulses per kWh (1000 imp/kWh). This provides a visual indication of energy consumption.
• The pulse output is inactive, meaning it is for visual indication only and not for external connection to other systems.

7 دیکھ بھال

The BEMKO A30-BM030-L electric meter is designed for maintenance-free operation. No internal user-serviceable parts are present.

• صفائی: If necessary, gently wipe the exterior of the meter with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids directly on the device.
• معائنہ: Periodically inspect the wiring connections to ensure they remain secure.
• ماحولیاتی: Ensure the operating environment remains within the specified temperature and humidity limits.

8 خرابیوں کا سراغ لگانا

If you encounter issues with your BEMKO A30-BM030-L electric meter, refer to the following common troubleshooting steps:

If the problem persists after following these steps, please contact your supplier or a qualified electrician.

9. وارنٹی اور سپورٹ

Specific warranty details for the BEMKO A31-BL01A-MID A30-BM030-L electric meter are not provided within this document. For warranty claims or technical support, please refer to the purchase documentation or contact your point of sale or the manufacturer, BEMKO SP. Z O.O., directly.

When contacting support, please have your product model number (A30-BM030-L) and purchase date available.