Defiant 270 Degree Black Replacement Outdoor Motion Sensor Instruction Manual

1. پروڈکٹ ختمview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. حفاظتی معلومات

براہ کرم اس پروڈکٹ کو انسٹال کرنے یا چلانے سے پہلے تمام ہدایات کو پڑھیں اور سمجھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں برقی جھٹکا، آگ، یا دیگر خطرات ہو سکتے ہیں جو املاک کو نقصان یا ذاتی چوٹ کا سبب بن سکتے ہیں۔

• انتباہ: الیکٹرک شاک کا خطرہ۔ تنصیب یا سروسنگ سے پہلے سرکٹ بریکر یا فیوز باکس سے بجلی منقطع کریں۔
• یقینی بنائیں کہ تمام برقی کنکشن مقامی کوڈز اور آرڈیننس کے مطابق بنائے گئے ہیں۔
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• پیکیجنگ مواد کو بچوں سے دور رکھیں۔

3. پیکیج کے مشمولات

تنصیب شروع کرنے سے پہلے تصدیق کریں کہ تمام اجزاء موجود ہیں:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• ہدایات دستی (یہ دستاویز)

4. وضاحتیں

5. تنصیب

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. پاور آف کریں: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltagای ٹیسٹر
2. پرانے سینسر کو ہٹا دیں: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. نیا سینسر تیار کریں: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. وائر کنکشن:
   • مربوط کریں۔ سیاہ تار from the sensor to the سیاہ (گرم) تار بجلی کی فراہمی سے.
   • مربوط کریں۔ سرخ تار from the sensor to the black (load) wire لائٹ فکسچر کا۔
   • مربوط کریں۔ سفید تار from the sensor to the سفید (غیر جانبدار) تار from the power supply and the light fixture.
   • مربوط کریں۔ زمینی تار (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   تار گری دار میوے اور برقی ٹیپ کے ساتھ تمام کنکشن کو محفوظ کریں.

5. ماؤنٹ سینسر: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. سیل کنکشن: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. بجلی کی بحالی: سرکٹ بریکر پر پاور کو دوبارہ آن کریں۔

6. سیٹ اپ اور ایڈجسٹمنٹ

After installation, adjust the sensor's settings for optimal performance.

• ٹیسٹ موڈ: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• حساسیت ایڈجسٹمنٹ: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• وقت کی ایڈجسٹمنٹ: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. آپریٹنگ ہدایات

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8 دیکھ بھال

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• صفائی: وقتا فوقتا سینسر لینس کو نرم سے صاف کریں، ڈیamp cloth to remove dust, dirt, or debris that may obstruct its view. کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
• معائنہ: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• رکاوٹیں: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9 خرابیوں کا سراغ لگانا

If your motion sensor is not functioning as expected, try the following steps:

10. وارنٹی اور سپورٹ

This Defiant motion sensor comes with a 1 سال کی محدود وارنٹی خریداری کی تاریخ سے. یہ وارنٹی عام استعمال کے تحت مواد اور کاریگری میں نقائص کا احاطہ کرتی ہے۔

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webسائٹ