Lepro 12V LED Strip Light User Manual

1. پروڈکٹ ختمview

The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.

پیکیج کے مشمولات

• 2 x Lepro 12V LED Strip Lights (32.8 ft each)
• صارف دستی

Note: A 12V power adapter is not included and must be purchased separately.

Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.

2. حفاظتی رہنما خطوط

براہ کرم تنصیب اور استعمال سے پہلے تمام حفاظتی ہدایات کو پڑھیں اور سمجھیں۔ ان ہدایات پر عمل کرنے میں ناکامی کے نتیجے میں برقی جھٹکا، آگ، یا دیگر خطرات ہو سکتے ہیں۔

• بجلی کی فراہمی: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattage of the LED strip lights does not exceed the maximum wattage of your power adapter.
• صرف اندرونی استعمال: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
• تنصیب کی سطح: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
• کاٹنا: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
• حرارت: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
• بچے: ورکنگ والیومtage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.

3. سیٹ اپ اور انسٹالیشن

3.1 انسٹال کرنے سے پہلے

1. اپنے لے آؤٹ کی منصوبہ بندی کریں: Determine the desired path for your LED strip. Measure the length required.
2. سطح صاف کریں: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
3. Test the Strip: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.

3.2 Connecting the Strip Light

The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.

1. Locate the DC input connector on the LED strip.
2. Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
3. پاور اڈاپٹر کو ایک معیاری وال آؤٹ لیٹ میں لگائیں۔

Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.

3.3 Mounting the Strip Light

The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.

1. Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
2. پٹی لگائیں: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
3. کاٹنا (اگر ضروری ہو تو): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
4. Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.

Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.

4. آپریٹنگ ہدایات

Operating the Lepro 12V LED Strip Light is straightforward once installed:

• پاور آن/آف: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
• چمک: This specific model of LED strip light is dimmable نہیں. It operates at a fixed brightness when powered on.

5. دیکھ بھال اور دیکھ بھال

Proper care ensures the longevity and performance of your LED strip lights:

• صفائی: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• ذخیرہ: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
• تیز جھکنے سے گریز کریں: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.

6 خرابیوں کا سراغ لگانا

If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:

7. مصنوعات کی تفصیلات

8. وارنٹی اور کسٹمر سپورٹ

Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.

You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: Lepro Amazon Store.