Extech MF100 AC/DC Magnetic Field Meter

تعارف

The Extech MF100 is a versatile AC/DC Magnetic Field Meter designed for accurate measurement of magnetic fields. It incorporates a Hall effect sensor with automatic temperature compensation, ensuring reliable readings across various environmental conditions. This device is suitable for a range of applications requiring precise magnetic field analysis.

Figure 1: The Extech MF100 AC/DC Magnetic Field Meter, showing the main unit connected to its uniaxial magnetic probe sensor.

خصوصیات

• Utilizes Hall effect sensor with Automatic Temperature Compensation (ATC)
• N pole/S pole indicator for magnetic field direction
• Zero button for accurate DC measurement
• ریڈنگ کو منجمد کرنے کے لیے ڈیٹا ہولڈ فنکشن
• Min/Max recording for capturing extreme values
• Auto power off with disable feature to conserve battery life

پیکیج کے مشمولات

پیکج کو کھولنے پر، براہ کرم تصدیق کریں کہ تمام اشیاء موجود ہیں اور بغیر کسی نقصان کے:

• Extech MF100 AC/DC Magnetic Field Meter
• Uniaxial Magnetic Probe Sensor
• Protective Cover for the probe
• 9V بیٹری (شامل)
• سخت کیرینگ کیس

حفاظتی معلومات

Please read and understand all safety precautions before operating the Extech MF100. Failure to follow these instructions may result in injury or damage to the device.

• Do not attempt to open the meter casing. Servicing should only be performed by qualified personnel.
• Keep the device away from strong electromagnetic fields that are not being measured, as this may affect accuracy.
• اس بات کو یقینی بنائیں کہ استعمال کرنے سے پہلے بیٹری کا ڈبہ محفوظ طریقے سے بند ہے۔
• مقامی قواعد کے مطابق بیٹریاں ڈسپوز کریں۔
• Avoid dropping the meter or subjecting it to severe impact.

سیٹ اپ

1. بیٹری کی تنصیب: Open the battery compartment cover on the back of the meter. Insert the included 9V battery, observing the correct polarity. Close the cover securely.
2. تحقیقات کنکشن: Connect the uniaxial magnetic probe sensor cable to the input jack located at the top of the MF100 meter. Ensure the connection is firm.
3. حفاظتی کور: Place the protective cover over the probe tip when not in use to prevent damage.

آپریٹنگ ہدایات

This section details the basic operation of the Extech MF100.

1. پاور آن/آف: دبائیں پاور button to turn the meter on or off. The display will illuminate.
2. Selecting AC/DC Mode: دبائیں MODE DC/AC button to toggle between AC (alternating current) and DC (direct current) magnetic field measurement modes. The selected mode will be indicated on the display.
3. Zeroing for DC Measurement: Before taking DC measurements, press the صفر button to calibrate the meter and eliminate any residual magnetic fields. This ensures accurate DC readings.
4. پیمائش کرنا: Position the tip of the uniaxial magnetic probe sensor in the magnetic field you wish to measure. The reading will be displayed on the LCD. The N pole/S pole indicator will show the direction of the magnetic field.
5. ڈیٹا ہولڈ: دبائیں پکڑو ڈسپلے پر موجودہ پڑھنے کو منجمد کرنے کے لئے بٹن۔ جاری کرنے کے لیے دوبارہ دبائیں۔
6. Min/Max Recording: دبائیں آر ای سی button once to enter Min/Max recording mode. The meter will continuously record the minimum and maximum values. Press آر ای سی again to cycle through Min, Max, and current readings. Press and hold آر ای سی to exit Min/Max mode.
7. آٹو پاور آف: The meter will automatically power off after a period of inactivity to conserve battery. To disable this feature, refer to the full manual for specific button sequences during power-on.

Figure 2: The Extech MF100 being used by a technician to measure a magnetic field in a laboratory environment.

Figure 3: The Extech MF100 in use outdoors, demonstrating its portability and application in various field conditions.

دیکھ بھال

• صفائی: Wipe the meter and probe with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• بیٹری کی تبدیلی: When the low battery indicator appears on the display, replace the 9V battery promptly to ensure accurate operation.
• ذخیرہ: Store the meter in its hard carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی اور سپورٹ

Warranty information for the Extech MF100 is typically provided with the product packaging or can be found on the official Extech website. For technical support, service, or to inquire about replacement parts, please visit the Extech Store on Amazon یا کارخانہ دار کا اہلکار webسائٹ