Displays2go IPDLMCSV360 iPad Table Clamp ہدایت نامہ

1. تعارف

The Displays2go IPDLMCSV360 iPad Table Clamp is a versatile holder designed to securely mount various tablet devices to tabletops or countertops. This unit is compatible with iPad 1-4, iPad Air, iPad Air 2, and a range of 7-inch and 10-inch Android tablets. Its adjustable design allows for 360-degree rotation, 180-degree tilt, and 90-degree swivel, providing optimal viewing and presentation angles. The clamp mechanism can attach to surfaces up to 3.5 inches thick.

اہم خصوصیات:

• Universal compatibility with iPad 1-4, iPad Air, iPad Air 2, and various 7" and 10" Android tablets.
• Adjustable design for 360-degree rotation, 180-degree tilt, and 90-degree swivel.
• محفوظ سی ایلamp mechanism for tabletops or countertops up to 3.5 inches thick.
• Designed to keep the tablet's home button exposed and accessible.
• Constructed from durable steel and aluminum components with some plastic parts.

شکل 1: ختمview of the Displays2go IPDLMCSV360 iPad Table Clamp with a tablet inserted.

2. پیکیج کے مشمولات

Please verify that all components are present before proceeding with assembly.

• Adjustable Tablet Holder
• آرٹیکلیوٹنگ آرم اسمبلی
• ٹیبل Clamp بیس

Figure 2: The tablet clamp components, including the holder, arm, and base.

3. سیٹ اپ اور انسٹالیشن

3.1 CL کو منسلک کرناamp Base to a Surface

1. Identify a suitable tabletop or countertop edge. The surface thickness must not exceed 3.5 inches.
2. میز کی پوزیشن clamp base (Figure 3) onto the edge of the surface.
3. Tighten the screw mechanism on the underside of the clamp until it is firmly secured to the surface. Ensure the clamp مستحکم ہے اور ہلتا ​​نہیں ہے.

شکل 3: clamp base attached to a table edge.

Figure 4: Detail of the clamp screw mechanism for securing the unit.

3.2 Assembling the Arm and Holder

1. Insert the articulating arm assembly into the designated slot on the secured clamp base. Ensure it clicks or locks into place if applicable.
2. Attach the adjustable tablet holder to the end of the articulating arm. Secure any locking rings or screws to ensure a firm connection.

4. آپریٹنگ ہدایات

4.1 Inserting a Tablet

1. Gently pull apart the spring-loaded grips of the tablet holder (Figure 5).
2. Carefully place your tablet into the holder, ensuring it is centered and securely gripped by both sides.
3. Verify that the tablet's home button remains exposed and accessible for full functionality.

Figure 5: Opening the tablet holder grips to insert a device.

4.2 ایڈجسٹ کرنا Viewآئی اینگل

The IPDLMCSV360 offers multiple adjustment points for optimal positioning:

• گردش: The tablet holder can rotate 360 degrees, allowing for portrait or landscape orientation.
• جھکاؤ: The holder can tilt 180 degrees to adjust the vertical viewING زاویہ
• کنڈا: The arm assembly allows for 90-degree swivel, enabling lateral adjustments.

Loosen any adjustment knobs or levers on the articulating arm and holder, position the tablet as desired, and then re-tighten to secure the angle.

Figure 6: Tablet holder tilted to an ergonomic viewING زاویہ

Figure 7: Tablet holder swiveled for flexible positioning.

5 دیکھ بھال

To ensure the longevity and proper function of your Displays2go iPad Table Clampان دیکھ بھال کے رہنما خطوط پر عمل کریں:

• صفائی: Wipe the metal and plastic surfaces with a soft, damp کپڑا کھرچنے والے کلینر یا سالوینٹس سے پرہیز کریں جو ختم کو نقصان پہنچا سکتے ہیں۔
• معائنہ: Periodically check all screws and connection points to ensure they remain tight. Re-tighten if necessary to maintain stability.
• ذخیرہ: If storing the unit for an extended period, ensure it is clean and kept in a dry environment.

6 خرابیوں کا سراغ لگانا

• Issue: The clamp feels unstable on the table.

  حل: ٹیبل cl کو یقینی بنائیںamp screw is fully tightened. Verify that the tabletop thickness is within the 3.5-inch limit. Reposition the clamp if the surface edge is uneven.

• Issue: The tablet is not held securely.

  حل: Confirm that the tablet is properly centered within the spring-loaded grips. Ensure the tablet's dimensions are compatible with the holder (iPad 1-4, iPad Air, iPad Air 2, 7" and 10" Android tablets).
• Issue: The arm or holder does not stay in the desired position.

  حل: Check and tighten all adjustment knobs or locking rings on the articulating arm and tablet holder. Over time, these may loosen with frequent adjustments.

7. وضاحتیں

8. وارنٹی اور سپورٹ

For warranty information or technical support regarding your Displays2go IPDLMCSV360 iPad Table Clamp, please contact Displays2go customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can typically find support information on the official Displays2go webسائٹ یا خوردہ فروش کے ذریعے جہاں پروڈکٹ خریدی گئی تھی۔