La Crosse Technology WS9162IT-SIL Wireless Temperature Station User Manual

1. تعارف

Thank you for choosing the La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This device provides accurate indoor and outdoor temperature readings, featuring a quartz clock and 24-hour time format. It utilizes 868 MHz IT+ technology for reliable wireless transmission up to 100 meters in open fields. This manual will guide you through the setup, operation, and maintenance of your temperature station.

2. حفاظتی معلومات

• ڈیوائس کو چلانے سے پہلے تمام ہدایات پڑھیں۔
• مرکزی یونٹ کو انتہائی درجہ حرارت، براہ راست سورج کی روشنی، یا نمی کے سامنے نہ رکھیں۔
• The outdoor sensor is designed for outdoor use but should be protected from direct rain and snow for extended longevity.
• Use only the specified battery type (AA LR6). Do not mix old and new batteries or different battery types.
• استعمال شدہ بیٹریوں کو مقامی ضابطوں کے مطابق ذمہ داری سے ٹھکانے لگائیں۔
• ڈیوائس کو بچوں کی پہنچ سے دور رکھیں۔

3. پیکیج کے مشمولات

• La Crosse Technology WS9162IT-SIL Main Temperature Station Unit
• وائرلیس آؤٹ ڈور ٹمپریچر سینسر
• ہدایت نامہ

4. پروڈکٹ ختمview

The La Crosse Technology WS9162IT-SIL consists of a main display unit and a wireless outdoor sensor. The main unit features an LCD screen displaying indoor and outdoor temperatures, as well as the current time. It can be mounted on a wall or placed on a tabletop. The outdoor sensor transmits temperature data wirelessly to the main unit.

Image 1: La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This image shows the main display unit and the accompanying wireless outdoor sensor, both in a silver finish. The main unit has an LCD screen for displaying temperature and time information.

5. سیٹ اپ

5.1 بیٹری کی تنصیب

1. وائرلیس آؤٹ ڈور سینسر کے لیے: Open the battery compartment on the back of the outdoor sensor. Insert the required batteries (typically 2 x AA LR6, not included) according to the polarity markings (+/-). Close the compartment securely.
2. For the Main Temperature Station Unit: Open the battery compartment on the back of the main unit. Insert 2 x AA LR6 batteries (not included) according to the polarity markings (+/-). Close the compartment securely.

اہم: Always insert batteries into the outdoor sensor پہلے inserting them into the main unit to ensure proper synchronization.

5.2 سینسر کی جگہ کا تعین

• آؤٹ ڈور سینسر کو سایہ دار جگہ پر رکھیں، براہ راست سورج کی روشنی اور گرمی کے ذرائع سے دور، درجہ حرارت کی درست ریڈنگ کو یقینی بنانے کے لیے۔
• Ensure the sensor is protected from direct rain and snow.
• Position the sensor within 100 meters (328 feet) of the main unit, ensuring there are minimal obstructions (e.g., thick walls, metal objects) that could interfere with the 868 MHz wireless signal.

5.3 ابتدائی ہم آہنگی۔

After inserting batteries into both units, the main station will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature will appear on the main unit's display. If the outdoor temperature does not appear, refer to the Troubleshooting section.

6. آپریٹنگ ہدایات

6.1 معلومات دکھائیں

LCD ڈسپلے مندرجہ ذیل معلومات کو ظاہر کرتا ہے:

• موجودہ وقت: Displayed in 24-hour format.
• اندرونی درجہ حرارت: The temperature measured by the main unit.
• بیرونی درجہ حرارت: The temperature transmitted from the wireless sensor.
• کم بیٹری کے اشارے: Icons will appear to indicate low battery for either the main unit or the outdoor sensor.

6.2 درجہ حرارت یونٹ کا انتخاب (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F button (usually on the back or side of the main unit) and press it. The display will update to the selected unit.

6.3 Minimum/Maximum Temperature Display

The station records the minimum (MIN) and maximum (MAX) indoor and outdoor temperatures. Press the 'MIN/MAX' button (or similar, refer to specific button labels on your unit) to cycle through the current, minimum, and maximum temperature readings. To reset the MIN/MAX records, press and hold the 'MIN/MAX' button for a few seconds.

6.4 وقت کی ترتیب

The time is typically set automatically via a quartz clock. If manual adjustment is needed, refer to the buttons on the back of the unit (e.g., 'SET', 'MODE', '+', '-') to enter time setting mode and adjust the hours and minutes. The time format is 24-hour.

7 دیکھ بھال

7.1 بیٹری کی تبدیلی

When the low battery indicator appears on the display, replace the batteries in the respective unit (main station or outdoor sensor). Always replace all batteries in a unit at the same time with new, fresh batteries of the specified type (AA LR6). Follow the battery installation steps in Section 5.1.

7.2 صفائی

ڈسپلے کو صاف کریں اور casing of the main unit and sensor with a soft, damp کپڑا کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں، کیونکہ یہ آلہ کو نقصان پہنچا سکتے ہیں۔

8 خرابیوں کا سراغ لگانا

9. وضاحتیں

• ماڈل: WS9162IT-SIL
• وقت: Quartz clock, 24-hour format
• اندرونی درجہ حرارت کی حد: -9.9°C سے +59.9°C (14.2°F سے 139.8°F)
• بیرونی درجہ حرارت کی حد: -39.9°C سے +59.9°C (-39.8°F سے 139.8°F)
• درجہ حرارت کی قرارداد: 0.1°C (0.2°F)
• Indoor Temperature Reading Interval: ہر 15 سیکنڈ میں
• تعدد: 868 میگاہرٹز
• ٹرانسمیشن رینج: Up to 100 meters (328 feet) in open field
• ٹیکنالوجی: IT+
• ڈسپلے کی قسم: LCD
• Power Source (Main Station): 2 x AA LR6 batteries (not included)
• پاور ماخذ (بیرونی سینسر): Batteries (type not specified, typically 2 x AA LR6, not included)
• کم بیٹری اشارے: جی ہاں
• ماؤنٹنگ کے اختیارات: Wall mountable or tabletop placement
• اسٹیشن کے طول و عرض: 80 x 150 x 29.4 ملی میٹر (3.15 x 5.91 x 1.16 انچ)
• پروڈکٹ وزن: 260 گرام (0.57 پونڈ)

10. وارنٹی اور سپورٹ

La Crosse Technology products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official La Crosse Technology website. For technical support or further assistance, please contact La Crosse Technology customer service through their official channels.