Finder Series 27 Type 270182300000 Electromechanical Pulse Relay User Manual

1. تعارف

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2. حفاظتی معلومات

انتباہ: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power before installing, servicing, or removing the relay.
• بجلی کے جھٹکے سے بچنے کے لیے مناسب گراؤنڈنگ کو یقینی بنائیں۔
• تصدیق کریں کہ سپلائی والیومtage and current ratings match the relay's specifications.
• ریلے کو اس کے مخصوص درجہ حرارت یا نمی کی حد سے زیادہ ماحول میں نہ چلائیں۔
• Avoid exposing the relay to moisture or corrosive substances.

3. پروڈکٹ ختمview

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• پینل ماؤنٹ: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• اعلی طاقت کی صلاحیت: 10 کے لیے درجہ بندی کی گئی۔ Amps and 2400 Watts at 230 Volts.

تصویر 3.1: سامنے والا view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing and terminal connections.

4. سیٹ اپ اور انسٹالیشن

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. بجلی کا کنکشن: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. چڑھنا: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. وائرنگ کنکشن:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage 230 وولٹ کا AC ہے۔
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • اس بات کو یقینی بنائیں کہ ڈھیلے رابطوں اور زیادہ گرم ہونے سے بچنے کے لیے تمام کنکشن سخت اور محفوظ ہیں۔
4. تصدیق: Double-check all wiring against the electrical diagram for your specific application.
5. بجلی کی بحالی: ایک بار جب انسٹالیشن مکمل ہو جائے اور تصدیق ہو جائے، سرکٹ میں بجلی بحال کریں۔

تصویر 4.1: تفصیلی view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. آپریٹنگ ہدایات

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

تصویر 5.1: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

تصویر 5.2: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6 دیکھ بھال

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• بصری معائنہ: جسمانی نقصان، رنگت، یا ڈھیلے کنکشن کی علامات کے لیے وقتاً فوقتاً ریلے کا معائنہ کریں۔
• صفائی: اگر ضروری ہو تو، ریلے کے بیرونی حصے کو خشک، نرم کپڑے سے آہستہ سے صاف کریں۔ سالوینٹس یا کھرچنے والے کلینر کا استعمال نہ کریں۔
• کنکشن چیک: Ensure all wiring connections remain tight and secure.
• ماحولیاتی حالات: اس بات کی تصدیق کریں کہ آپریٹنگ ماحول مخصوص درجہ حرارت اور نمی کی حدود میں رہتا ہے۔

نوٹ: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7 خرابیوں کا سراغ لگانا

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage matches the relay's coil voltage (230V AC)۔
  • Inspect control circuit wiring for breaks or loose connections.
• لوڈ نہیں سوئچنگ:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • Verify that the load current does not exceed the relay's 10 Amp درجہ بندی
  • Confirm that the load itself is functional.
• Relay Overheating:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • تصدیق کریں کہ محیطی درجہ حرارت مخصوص آپریٹنگ رینج کے اندر ہے۔

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. وضاحتیں

9. وارنٹی اور سپورٹ

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official webسائٹ یا مجاز تقسیم کار۔ خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید اپنے پاس رکھیں۔

مینوفیکچرر: تلاش کریں

حصہ نمبر: 27.01.8.230.0000