FORA Painless Design Adjustable Lancing Device

FORA Painless Design Adjustable Lancing Device User Manual

Model: Painless Design Adjustable Lancing Device

1. تعارف

Thank you for choosing the FORA Painless Design Adjustable Lancing Device. This device is designed to assist in obtaining blood samples for glucose monitoring with enhanced comfort and safety. Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

اہم خصوصیات:

2. حفاظتی معلومات

Always follow basic safety precautions when using this lancing device to reduce the risk of injury or infection.

3. پروڈکٹ ختمview

Familiarize yourself with the components of your FORA Lancing Device:

Diagram of FORA Lancing Device components: Cap, Depth indicator, Ejector, Release Button.

تصویر 3.1: Components of the FORA Lancing Device. This diagram illustrates the main parts: the protective cap, the depth indicator for setting penetration level, the ejector mechanism for safe lancet removal, and the release button to activate the lancing action.

4. سیٹ اپ

4.1 Inserting a Lancet

  1. Unscrew the cap from the lancing device.
  2. Insert a new, sterile lancet firmly into the lancet holder.
  3. Twist off the protective cap from the lancet. Retain this cap for safe disposal later.
  4. Replace the lancing device cap by screwing it back on.

4.2 Adjusting Penetration Depth

The lancing device features 6 adjustable depth settings. Rotate the cap to select the desired depth. A higher number indicates a deeper penetration.

Three-step illustration for collecting blood samples: 1. Select desired depth, 2. Pull cocking control back, 3. Lance the finger.

تصویر 4.1: Steps for preparing and using the lancing device. This image demonstrates selecting the penetration depth, cocking the device, and performing a finger prick.

5. آپریٹنگ ہدایات

5.1 Performing a Blood Sample (Fingerstick)

  1. Wash your hands thoroughly with soap and warm water, then dry them completely.
  2. Ensure a new lancet is inserted and the depth setting is appropriate for your skin type (refer to Section 4.2).
  3. Pull the cocking control back until it clicks. The device is now armed.
  4. لانسنگ ڈیوائس کو مضبوطی سے اپنی انگلی کی نوک کی طرف رکھیں۔
  5. Press the release button to activate the lancet.
  6. Gently massage your finger from the base towards the tip to form a blood drop. Do not squeeze excessively.
  7. Apply the blood drop to your glucose meter test strip as instructed by your meter's manual.

5.2 Alternative Site Testing (AST)

The FORA Lancing Device includes a clear alternate site end cap for testing on areas other than the fingertip, such as the forearm or palm. Consult your healthcare professional before performing AST, as results from alternative sites may differ from fingertip results, especially during periods of rapid glucose change.

  1. Remove the standard cap and replace it with the clear AST cap.
  2. Select a suitable depth setting (AST generally requires a deeper setting due to thicker skin).
  3. Pull the cocking control back until it clicks.
  4. Press the clear AST cap firmly against the chosen alternative site (e.g., forearm or palm) and hold for a few seconds to create a vacuum.
  5. رہائی کا بٹن دبائیں۔
  6. Gently massage the area to form a blood drop.
  7. Apply the blood drop to your glucose meter test strip.

5.3 Safely Disposing of a Used Lancet

Proper disposal of used lancets is crucial to prevent accidental needle sticks and the spread of infection.

Two-step illustration for safely disposing of a used lancet: 1. Safely dispose by pushing the exposed tip into a protective disk, 2. Slide the ejector forward to remove the used lancet.

تصویر 5.1: Steps for safe lancet disposal. This image shows how to cap the lancet and then use the ejector mechanism to remove it from the device.

  1. لانسنگ ڈیوائس کیپ کو کھولیں۔
  2. Carefully place the protective cap (removed in Section 4.1) back onto the used lancet, ensuring the needle is fully covered. Alternatively, if your lancets come with a protective disk, push the exposed tip into the disk on a hard surface.
  3. Slide the ejector forward to release the capped lancet into an approved sharps container.
  4. لانسنگ ڈیوائس کیپ کو تبدیل کریں۔

6 دیکھ بھال

6.1 Cleaning the Lancing Device

6.2 اسٹوریج

7 خرابیوں کا سراغ لگانا

If you encounter issues with your lancing device, refer to the table below for common problems and solutions.

مسئلہممکنہ وجہحل
Device does not cock or fire.Device not fully cocked; lancet not inserted correctly; device malfunction.Ensure the cocking control is pulled back until it clicks. Re-insert lancet. If problem persists, contact customer support.
ناکافی خون sampleDepth setting too shallow; insufficient blood flow; cold hands.Increase depth setting. Warm hands before testing. Gently massage the lanced area.
Pain during lancing.Depth setting too deep; reused lancet; lancing on calloused area.Decrease depth setting. Always use a new lancet. Choose a different lancing site.
Lancet cannot be ejected.Lancet stuck; ejector mechanism obstructed.Ensure the cap is removed. Gently try to slide the ejector. If stuck, carefully remove with tweezers and dispose of safely.

8. وضاحتیں

فیچرتفصیل
ماڈلPainless Design Adjustable Lancing Device
گہرائی کی ترتیبات6 سایڈست سطحوں
Lancet CompatibilityMost standard lancets (28-33 gauge)
طول و عرضتقریباً 6.1 x 3.2 x 1 انچ
وزنتقریباً 1.6 اونس
کارخانہ دارForaCare Inc.
ASINB01INS8T5I

9. وارنٹی اور سپورٹ

For warranty information, technical support, or to purchase accessories, please contact FORA customer service or visit the official FORA webسائٹ

You can find more information about FORA products and support at the FORA Store on Amazon.

متعلقہ دستاویزات - Painless Design Adjustable Lancing Device

پریview FORA 6 بلڈ گلوکوز ٹیسٹ سٹرپ صارف کی معلومات اور درستگی کا ڈیٹا
FORA 6 بلڈ گلوکوز ٹیسٹ سٹرپس کے لیے جامع گائیڈ، انتباہات، مطلوبہ استعمال، حدود، ہینڈلنگ، جانچ کے طریقہ کار، نتائج کی تشریح، کوالٹی کنٹرول، کیمیائی ساخت، درستگی کے اعداد و شمار، اور صارف کی کارکردگی کے مطالعے کا احاطہ کرتا ہے۔ صحت کی دیکھ بھال کرنے والے پیشہ ور افراد اور خود جانچ کے لیے معلومات شامل ہیں۔
پریview FORA Diamond MINI بلڈ گلوکوز میٹر صارف گائیڈ
خود جانچ کے لیے FORA Diamond MINI بلڈ گلوکوز میٹر استعمال کرنے کے لیے ایک مختصر گائیڈ۔ مرحلہ وار ہدایات کے ساتھ خون میں گلوکوز کی سطح کو درست اور محفوظ طریقے سے ماپنے کا طریقہ سیکھیں۔
پریview FORA Diamond GD50 بلڈ گلوکوز میٹر: انسٹرکشن گائیڈ
یہ گائیڈ FORA Diamond GD50 بلڈ گلوکوز میٹر کو خود جانچ کے لیے استعمال کرنے کے لیے مرحلہ وار ہدایات فراہم کرتا ہے۔ ڈیوائس کو تیار کرنے، اپنے خون میں گلوکوز کی جانچ کرنے اور استعمال شدہ مواد کو محفوظ طریقے سے ٹھکانے لگانے کا طریقہ سیکھیں۔
پریview FORA 6 بلڈ گلوکوز ٹیسٹ سٹرپس - صارف گائیڈ اور تفصیلات
یہ دستاویز FORA 6 بلڈ گلوکوز ٹیسٹ سٹرپس کے بارے میں جامع معلومات فراہم کرتی ہے، بشمول مطلوبہ استعمال، حدود، اسٹوریج، ہینڈلنگ، جانچ کے طریقہ کار، اور درستگی کے نتائج۔ یہ صحت کی دیکھ بھال کرنے والے پیشہ ور افراد اور ذیابیطس کا انتظام کرنے والے افراد دونوں کے لیے ڈیزائن کیا گیا ہے۔
پریview FORA 6 کنیکٹ بلڈ گلوکوز میٹر صارف گائیڈ
FORA 6 Connect خون کے گلوکوز میٹر کو استعمال کرنے کے لیے ایک مختصر گائیڈ، جس میں سیٹ اپ، آپریشن، اور ایپ کنیکٹیویٹی شامل ہے۔
پریview FORA 6 ٹیسٹ سٹرپ ہدایات، وضاحتیں، اور درستگی کا ڈیٹا
FORA 6 بلڈ گلوکوز، ہیماٹوکریٹ، اور ہیموگلوبن ٹیسٹ سٹرپس کے لیے جامع گائیڈ، جس میں مطلوبہ استعمال، انتباہات، حدود، اسٹوریج، جانچ کے طریقہ کار، درستگی کے نتائج، اور حوالہ جاتی اقدار شامل ہیں۔