تعارف
This manual provides comprehensive instructions for the safe and effective use of the Proster RZMT-10 MD Digital Wood Moisture Meter. This device is designed to measure the moisture content of wood, paper, and cardboard using electrical resistance. Please read this manual thoroughly before operation to ensure accurate measurements and to prevent damage to the device or injury.
حفاظتی معلومات
انتباہ: The electrode pins are sharp. Exercise caution when handling this instrument. Do not point the probe pins towards humans or animals to avoid injury. Keep the device out of reach of children.
پروڈکٹ ختمview
The Proster RZMT-10 MD Digital Wood Moisture Meter is a handheld device featuring an HD LCD for clear readings. It includes integrated electrode pins for measurement and a protective cap for safety.
اہم خصوصیات:
- Displays wood moisture content on an LCD screen.
- Suitable for wood, paper, and cardboard.
- Measurement principle: Electrical resistance.
- Memory for 4 wood groups with calibrations for approximately 50 species.
- Impact-proof housing for durability.
- Automatic power-off function to conserve battery.
- Data hold function for stable readings.
- Built-in battery check and low battery indicator.
- Comes with a protective cap.
اجزاء کی شناخت:
سیٹ اپ
بیٹری کی تنصیب:
- ڈیوائس کے پچھلے حصے میں بیٹری کے ٹوکرے کا پتہ لگائیں۔
- بیٹری کے ٹوکری کا احاطہ کھولیں۔
- درست قطبیت (+/-) کو یقینی بناتے ہوئے ایک 9V بیٹری ڈالیں۔
- بیٹری کے کمپارٹمنٹ کور کو محفوظ طریقے سے بند کریں۔
- ڈیوائس اب استعمال کے لیے تیار ہے۔
نوٹ: A 9V battery is included with the product.
آپریٹنگ ہدایات
Follow these steps to accurately measure moisture content:
- Step 1: Remove Protection Cap and Power On
Carefully remove the protective cap from the measurement pins. Press the "پاور" button to turn on the device. - Step 2: Select Wood Group
دبائیں"موڈ" button to cycle through the available wood groups (A, B, C, D) until the appropriate group for your material is selected. Refer to the "Wood Group Selection" section for details. - Step 3: Take Measurement
Gently push the measurement pins into the material (wood, paper, cardboard) to be tested. Ensure the pins penetrate sufficiently for a stable contact. The moisture reading will be displayed on the LCD screen. - Step 4: Hold Reading (Optional)
Once the reading stabilizes, press the "پکڑو" button to freeze the displayed value. This allows you to record the measurement after removing the pins from the material. Press "پکڑو" again to release the reading. - مرحلہ 5: پاور آف
دبائیں"پاور" button to turn off the device. The meter also features an automatic power-off function after approximately 15 minutes of inactivity to conserve battery life.
Wood Group Selection
The meter has four pre-programmed wood groups (A, B, C, D) to provide accurate readings for approximately 50 different wood species. Select the group that best matches the material you are testing.
| گروپ | لکڑی کی انواع |
|---|---|
| A | Teak, Walnut, Afromosia, Rubber tree |
| B | Keruing, White poplar, Beech, Cedar, Tola |
| C | Lauan, Ash, Elm, Fir, Maple, Padauk, Tola |
| D | Basswood, Larch, Pine, Birch |
دیکھ بھال
صفائی:
- Wipe the meter's housing with a soft, dry cloth.
- کھرچنے والے کلینر یا سالوینٹس کا استعمال نہ کریں۔
- Ensure the measurement pins are clean and free of debris for accurate readings.
ذخیرہ:
- Always replace the protective cap over the measurement pins when not in use to prevent damage and injury.
- آلے کو ٹھنڈی، خشک جگہ پر، براہ راست سورج کی روشنی اور انتہائی درجہ حرارت سے دور رکھیں۔
- اگر لمبے عرصے تک ذخیرہ کر رہے ہیں، تو رساو کو روکنے کے لیے 9V بیٹری کو ہٹا دیں۔
خرابی کا سراغ لگانا
عام مسائل اور حل:
- No Display / Device Not Turning On:
- چیک کریں کہ آیا 9V بیٹری مناسب قطبیت کے ساتھ صحیح طریقے سے انسٹال ہے۔
- اگر 9V بیٹری ختم ہو جائے تو اسے بدل دیں۔
- غلط پڑھنا:
- Ensure the measurement pins are clean and fully inserted into the material.
- Verify that the correct wood group (A, B, C, D) is selected for the material being tested.
- Ensure the material surface is free of moisture or contaminants that could affect readings.
- The device is designed for wood, paper, and cardboard. Using it on other materials may yield inaccurate results.
- "LOW BATTERY" Indicator:
- Replace the 9V battery immediately to ensure continued accurate operation.
وضاحتیں
| فیچر | تفصیل |
|---|---|
| پیمائش کا اصول | برقی مزاحمت |
| پیمائش کی حد | 0% ~ 99.9% wood |
| قرارداد | 0.1% |
| درستگی | ±0.5% |
| الیکٹروڈ لمبائی | 10mm (0.4") |
| الیکٹروڈ پن | مربوط |
| آٹو پاور آف | تقریبا After کے بعد 15 منٹ کی غیر فعالیت |
| Meter Housing Material | ABS پلاسٹک |
| آپریٹنگ درجہ حرارت | 0℃ ~ 40℃ (32°F ~ 104°F) |
| آپریٹنگ نمی | 85% Relative Humidity Maximum |
| طول و عرض (L x W x H) | 145 X 67 X 32MM (5.71 X 2.64 ایکس 1.26 انچ) |
| وزن | 140 گرام |
| رنگ | کینو |
| بجلی کی فراہمی | 1 x 9V بیٹری (شامل) |
وارنٹی کی معلومات
Specific warranty details for the Proster RZMT-10 MD Digital Wood Moisture Meter are typically provided with the product packaging or on the manufacturer's official website. Please refer to these sources for the most accurate and up-to-date warranty terms and conditions. Generally, warranties cover defects in materials and workmanship under normal use. Keep your purchase receipt as proof of purchase.
حمایت
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Proster RZMT-10 MD Digital Wood Moisture Meter, please contact Proster customer support. Contact information can usually be found on the product packaging, the official Proster webسائٹ، یا خوردہ فروش کے ذریعے جہاں پروڈکٹ خریدی گئی تھی۔
