DIRECTV RC73, 4336303112

DIRECTV RC73 IR/RF ریموٹ کنٹرول صارف دستی

Model: RC73, 4336303112

پروڈکٹ ختمview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

سیٹ اپ

1. بیٹری کی تنصیب

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. ریموٹ کنٹرول کے پیچھے بیٹری کے ٹوکری کا احاطہ تلاش کریں۔
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  4. بیٹری کے کمپارٹمنٹ کور کو تبدیل کریں، اسے واپس اپنی جگہ پر سلائیڈ کرتے ہوئے جب تک کہ یہ محفوظ طریقے سے کلک نہ کرے۔
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. ریموٹ کو اپنے DIRECTV ریسیور کی طرف رکھیں۔
  2. ساتھ ہی دبائیں اور دبائے رکھیں گونگا بٹن اور منتخب کریں۔ button on the remote for approximately 5 seconds.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. دبائیں چینل اپ ایک بار بٹن.
  6. دبائیں داخل کریں۔ button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. دبائیں منتخب کریں۔ (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. دبائیں مینو button on your DIRECTV remote.
  2. Navigate down using the چینل ڈاؤن button to find and select ترتیبات.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select ریموٹ کنٹرول.
  4. From the Remote Control Setup menu, select جوڑا / پروگرام ریموٹ.
  5. منتخب کریں۔ Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the پاور button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

آپریٹنگ ہدایات

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

کلیدی بٹن کے افعال۔
بٹنفنکشن
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
گائیڈPress once for On-Screen Guide. Press twice for programming grouped into categories.
مینوAccesses the main menu for settings, recordings, and more.
فہرستDisplays the LIST of your recorded programs.
باہر نکلیںExits the current menu and returns to the previous channel viewایڈ
منتخب کریں۔Selects the item highlighted on screen.
INFODisplays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL (جلد)Adjusts the volume of your TV or audio device (if programmed).
CH (چینل)چینل کو اوپر یا نیچے تبدیل کرتا ہے۔
PREVReturns to the PREVIOUS channel viewایڈ
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
گونگاآواز کو خاموش کرتا ہے۔
دوبارہ چلائیں۔Replays the previous six seconds.
ریوائنڈ کریں۔Rewinds at increasing speeds—press up to four times.
چلائیں/روکیں۔Plays the current program. Press once while the program is playing to PAUSE.
ڈیش (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
ایڈوانسAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
فاسٹ فارورڈFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

دیکھ بھال

بیٹری کی تبدیلی

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. پرانی بیٹریاں ہٹا دیں۔
  3. Insert two new AA batteries, observing the correct polarity (+/-).
  4. بیٹری کے کمپارٹمنٹ کور کو تبدیل کریں۔

صفائی

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

خرابی کا سراغ لگانا

مشترکہ مسائل اور حل
مسئلہممکنہ وجہحل
Remote not responding to receiver.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.کم بیٹری پاور۔بیٹریاں فوری طور پر تبدیل کریں۔
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

وضاحتیں

وارنٹی اور سپورٹ

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV webسائٹ وارنٹی کی شرائط و ضوابط مختلف ہو سکتے ہیں۔

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

آن لائن وسائل:

متعلقہ دستاویزات - RC73, 4336303112

پریview DIRECTV جنی اور یونیورسل ریموٹ کنٹرول گائیڈ
DIRECTV جنی اور یونیورسل ریموٹ کے افعال کو سمجھنے کے لیے ایک جامع گائیڈ، بشمول بٹن کی تفصیلی وضاحت اور مختلف DIRECTV ریسیورز اور TVs کے لیے پروگرامنگ ہدایات۔
پریview DIRECTV یونیورسل ریموٹ کنٹرول گائیڈ: شروع کرنا اور پروگرامنگ کرنا
اپنے DIRECTV یونیورسل ریموٹ کنٹرول کو استعمال کرنے کا طریقہ سیکھیں، بٹن کے افعال کو سمجھیں، اور کاروباری اکاؤنٹس کے لیے اپنے RC73 ریموٹ کو پروگرام کریں۔ سیٹ اپ کی ہدایات اور خصوصیات پر مشتمل ہے۔
پریview DIRECTV وائرلیس جنی منی سیٹ اپ اور ایکٹیویشن گائیڈ
ہموار ویڈیو تفریح ​​کے لیے اپنے نئے DIRECTV Wireless Genie Mini کو مربوط کرنے، ترتیب دینے، فعال کرنے اور پروگرام کرنے کے لیے مرحلہ وار ہدایات۔
پریview DIRECTV جنی 2 سرور ایکٹیویشن اور آلات کی واپسی کی ہدایات
آپ کے متبادل DIRECTV Genie 2 سرور کو فعال کرنے اور واپس نہ کرنے کی فیس سے بچنے کے لیے اپنے پرانے آلات کو واپس کرنے کے لیے مرحلہ وار گائیڈ۔ سیٹ اپ، جوڑا بنانے اور واپسی کے طریقہ کار پر مشتمل ہے۔
پریview DIRECTV Genie 2 پروڈکٹ مینوئل - خصوصیات، وضاحتیں، اور حفاظتی معلومات
DIRECTV Genie 2 سیٹلائٹ ریسیور کے لیے جامع پروڈکٹ مینوئل، جس میں ہارڈ ویئر کی تفصیلات، خصوصیات، ٹربل شوٹنگ، LED اشارے، حفاظتی احتیاطی تدابیر اور وارنٹی کی معلومات شامل ہیں۔ سیٹ اپ اور آپریشنل رہنمائی پر مشتمل ہے۔
پریview DIRECTV Wireless Genie Mini C41W انسٹالیشن گائیڈ
بہتر گھریلو تفریح ​​کے لیے DIRECTV Wireless Genie Mini (ماڈل C41W) کو اپنے Genie HD DVR سے انسٹال کرنے اور منسلک کرنے کے لیے مرحلہ وار گائیڈ۔