پروڈکٹ ختمview
This manual provides essential information for the safe and effective handling, storage, and use of TCI America's 4-Sulfo-1,8-naphthalic Anhydride Potassium Salt (S0904-25G).
کیمیائی نام: 4-Sulfo-1,8-naphthalic Anhydride Potassium Salt
CAS نمبر: 71501-16-1
MDL نمبر: MFCD00012097
طہارت: >98.0% (HPLC)
مالیکیولر فارمولا: C12H5KO6S
سالماتی وزن: 316.32
مترادفات: 4-Sulfo-1,8-naphthalenedicarboxylic Anhydride Potassium Salt
Safety Information and Handling Precautions
This product is intended for laboratory research use only and is not for human or animal use. Always handle chemical reagents with appropriate safety measures.
- Wear appropriate Personal Protective Equipment (PPE), including safety goggles, lab coat, and chemical-resistant gloves.
- Work in a well-ventilated area or under a fume hood to minimize exposure to airborne particles.
- Avoid inhalation, ingestion, and contact with skin and eyes.
- In case of contact, immediately flush affected area with plenty of water and seek medical attention if irritation persists.
- Refer to the Safety Data Sheet (SDS) for comprehensive safety information before handling this product.
ذخیرہ اور دیکھ بھال
Proper storage is crucial to maintain the integrity and purity of the chemical.
- اسٹوریج کا درجہ حرارت: 15-25 °C (کمرے کا درجہ حرارت)۔
- Store in a tightly sealed container to prevent moisture absorption and contamination.
- Keep away from incompatible materials, direct sunlight, and heat sources.
- Ensure the storage area is dry, cool, and well-ventilated.
- Regularly inspect containers for any signs of damage or leakage.
Preparation for Use (Setup)
Before using the chemical, ensure your laboratory environment is prepared:
- Verify that all necessary PPE is available and in good condition.
- Ensure the work area is clean, organized, and free from clutter.
- Confirm that ventilation systems (e.g., fume hood) are operational.
- Have appropriate spill containment materials readily accessible.
- Label all working solutions and containers clearly.
General Usage Guidelines (Operating)
This product is a chemical reagent. Its specific application will depend on the experimental protocol. Always adhere to standard laboratory practices and the specific requirements of your experiment.
- Weigh or measure the required amount accurately using calibrated equipment.
- Dissolve or dilute the chemical in appropriate solvents as per your experimental design.
- Avoid cross-contamination by using clean glassware and dedicated tools.
- Record all experimental parameters, including quantities used, conditions, and observations.
- Do not return unused chemical to the original container to prevent contamination.
عام مسائل کا ازالہ کرنا
While the chemical itself does not "malfunction," issues can arise from improper handling or storage.
- مسئلہ: Apparent degradation or discoloration of the chemical.
قرارداد: Verify storage conditions (temperature, humidity, light exposure). Ensure the container was properly sealed. If degradation is suspected, do not use for critical experiments and consider proper disposal. - مسئلہ: Contamination of the chemical.
قرارداد: Ensure all tools and glassware used are clean and dry. Avoid returning unused chemical to the original bottle. If contamination is confirmed, dispose of the contaminated material safely. - مسئلہ: Difficulty dissolving the chemical.
قرارداد: Check the recommended solvent for your application. Ensure the solvent is fresh and of appropriate purity. Consider sonication or gentle heating if compatible with the chemical and solvent.
مصنوعات کی وضاحتیں
| وصف | قدر |
|---|---|
| کیمیائی نام | 4-Sulfo-1,8-naphthalic Anhydride Potassium Salt |
| CAS نمبر | 71501-16-1 |
| ایم ڈی ایل نمبر | MFCD00012097 |
| طہارت | >98.0% (HPLC) |
| مالیکیولر فارمولا | C12H5KO6S |
| سالماتی وزن | 316.32 |
| اسٹوریج کا درجہ حرارت | 15-25 °C |
| کارخانہ دار | ٹی سی آئی |
| پہلی تاریخ دستیاب ہے۔ | 24 اگست 2017 |
مصنوعات کی تصاویر



ضائع کرنے کی معلومات
Dispose of this chemical and any contaminated materials in accordance with all local, state, and federal regulations. Consult your institution's chemical waste management guidelines or a licensed waste disposal company.
Legal Disclaimer and Warranty
TCI امریکہ کی مصنوعات بنیادی طور پر لیبارٹری کے استعمال کے لیے ہیں اور، جب تک کہ دوسری صورت میں TCI امریکہ کے انوائس، دیگر تحریروں، یا پروڈکٹ کے لیبلز پر اشارہ نہ کیا گیا ہو، دیگر مقاصد کے لیے استعمال نہیں کیا جانا چاہیے، بشمول، انسانی یا جانوروں کے استعمال، یا کھانے، دوائی، یا طبی آلات (بشمول وٹرو ڈائیگنوسٹک، فوڈ ڈیگنوسٹک میں) ڈرگ اینڈ کاسمیٹک ایکٹ، جیسا کہ ترمیم کیا گیا ہے، اور نہ ہی کیڑے مار دوا کے طور پر جیسا کہ وفاقی کیڑے مار دوا، فنگسائڈ اور روڈینٹیسائیڈ ایکٹ میں بیان کیا گیا ہے۔ خریدار تسلیم کرتا ہے کہ اس کے تحت خریدی گئی مصنوعات کو TCI امریکہ نے خوراک، دوائی، کاسمیٹک یا کیڑے مار دوا میں حفاظت اور افادیت کے لیے نہیں جانچا ہے جب تک کہ TCI امریکہ نے خریدار کو تحریری طور پر بیان نہ کیا ہو۔ خریدار واضح طور پر TCI امریکہ کی نمائندگی کرتا ہے اور اس کی ضمانت دیتا ہے کہ خریدار TCI امریکہ سے خریدی گئی کسی بھی مصنوعات کی صحیح جانچ، استعمال، تیاری اور مارکیٹنگ کرے گا۔ مکمل دستبرداری کے لیے، TCI شرائط و ضوابط دیکھیں۔
For specific warranty information, please refer to the official TCI Terms and Conditions available on the TCI America webسائٹ یا کسٹمر سپورٹ سے رابطہ کریں۔
مینوفیکچرر سپورٹ
For technical inquiries, product information, or support, please contact TCI America directly. TCI America, a division of Tokyo Chemical Industry, offers a wide range of high-quality organic reagents for research and development.
Visit the official TCI America webرابطے کی تفصیلات اور اضافی وسائل کے لیے سائٹ: ایمیزون پر ٹی سی آئی اسٹور





