POWERTECH MP3752 12V/24V 20A سولر کنٹرولر صارف دستی

1. تعارف

The POWERTECH MP3752 is an intelligent and lightweight solar charge controller designed to manage the power flow from your solar panels to your battery bank. Utilizing Pulse Width Modulation (PWM) technology, it ensures efficient and safe battery charging. This controller offers a set-and-forget operation, providing maximum charge into your batteries without constant monitoring. It integrates essential safety features such as overload, short-circuit, over-discharge, and reverse-polarity protection. Additionally, a convenient USB port on the front panel allows for up to 1.2A charging, useful for mobile devices during power outages. The unit supports various battery types including sealed lead-acid, Gel, and flooded cells, and automatically selects the optimal charging mode (bulk, equalise, float).

2. حفاظتی معلومات

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, battery, or personal injury.

• Ensure all connections are correct and secure before applying power.
• Do not connect the solar controller to an AC power source.
• آتش گیر مواد اور براہ راست سورج کی روشنی سے دور، اچھی ہوادار جگہ پر کنٹرولر انسٹال کریں۔
• Avoid short-circuiting the battery terminals or solar panel terminals.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
• This device is not waterproof; protect it from moisture and water.
• صرف اہل افراد کو تنصیب اور دیکھ بھال کرنا چاہئے۔

3. مصنوعات کی خصوصیات

• Automatic charge mode selection (Bulk, Equalise, Float).
• Suitable for both 12V and 24V battery banks.
• Integrated USB charging port (5V, 1.2A max) on the front panel.
• Supports sealed lead-acid, Gel, and flooded battery types.
• Comprehensive protection features: overload, short-circuit, over-discharge, reverse-polarity.
• Pulse Width Modulation (PWM) charging technology.

4. پیکیج کے مشمولات

براہ کرم وصولی کے بعد پیکیج کے مواد کو چیک کریں:

• 1 x POWERTECH MP3752 Solar Controller
• 1 ایکس یوزر مینوئل (یہ دستاویز)

5. پروڈکٹ ختمview اور رابطے

شکل 1: سامنے view of the POWERTECH MP3752 Solar Controller. This image displays the PV LOAD, UVW, LVD, Load ON, Over Load, Short-Circuit indicators, the USB port, and the connection terminals for solar panels, battery, and load.

The MP3752 controller features clearly marked terminals for easy connection. Refer to Figure 1 for a visual guide to the controller's layout and indicators.

کنکشن ٹرمینلز:

• Solar Panel Input (PV): Connect your solar panel array here. Ensure correct polarity (+ and -).
• بیٹری کنکشن: Connect your 12V or 24V battery bank here. Observe correct polarity (+ and -).
• لوڈ آؤٹ پٹ: Connect your DC loads (e.g., lights, fans) here. Observe correct polarity (+ and -).
• USB پورٹ: 5V, 1.2A max output for charging small electronic devices.

6. سیٹ اپ اور انسٹالیشن

اپنے سولر چارج کنٹرولر کی مناسب تنصیب کے لیے ان اقدامات پر عمل کریں:

1. چڑھنا: Choose a dry, well-ventilated indoor location, away from direct sunlight, high temperatures, and moisture. Ensure sufficient air circulation around the controller.
2. بیٹری کنکشن:
   • Connect the positive (+) terminal of the battery to the battery positive (+) terminal on the controller.
   • Connect the negative (-) terminal of the battery to the battery negative (-) terminal on the controller.
   • The controller will automatically detect if it's a 12V or 24V system.
3. سولر پینل کنکشن:
   • Connect the positive (+) terminal of the solar panel to the solar panel positive (+) terminal on the controller.
   • Connect the negative (-) terminal of the solar panel to the solar panel negative (-) terminal on the controller.
   • Ensure the open-circuit voltage of the solar panel does not exceed the maximum input voltage of the controller (typically 50V for 12/24V systems).
4. لوڈ کنکشن:
   • Connect the positive (+) terminal of your DC load to the load positive (+) terminal on the controller.
   • Connect the negative (-) terminal of your DC load to the load negative (-) terminal on the controller.
   • Do not exceed the maximum rated current for the load output (20A).
5. کنکشنز کی تصدیق کریں: Double-check all connections for correct polarity and tightness before proceeding.

Figure 2: The POWERTECH MP3752 Solar Controller shown in its packaging, illustrating its application with solar panels. This image provides a contextual view of the product's intended use.

7. آپریٹنگ ہدایات

7.1. Automatic System Voltagای پہچان

The controller automatically detects whether the connected battery bank is 12V or 24V upon initial connection. Ensure the battery is connected first for proper voltagای کا پتہ لگانا

7.2. چارجنگ موڈز

The MP3752 employs intelligent PWM charging, automatically cycling through different stages to optimize battery health and lifespan:

• بلک چارج: Delivers maximum current to rapidly bring the battery to approximately 80% charge.
• Equalise Charge: Periodically applies a higher voltage to equalize the charge among battery cells, preventing sulfation and extending battery life (for flooded batteries).
• فلوٹ چارج: ایک چھوٹا، مستقل والیوم فراہم کرکے بیٹری کو مکمل چارج پر برقرار رکھتا ہے۔tage, compensating for self-discharge.

7.3. لوڈ کنٹرول

The load output is controlled by the controller to prevent over-discharge of the battery. When the battery voltage کم والیوم سے نیچے گرتا ہے۔tage Disconnect (LVD) threshold, the load output will be automatically disconnected. It will reconnect once the battery has recharged to the Low Voltage Reconnect (LVR) threshold.

Press the power button on the controller to manually turn the load output ON or OFF.

7.4. USB چارجنگ پورٹ۔

The 5V, 1.2A USB port can be used to charge small electronic devices like smartphones or tablets. This port is active as long as the battery has sufficient charge.

8. اشارے

The POWERTECH MP3752 features several LED indicators to provide real-time status information:

• PV LOAD (Solar Panel Indicator):
  • سبز: Solar panel is connected and generating power.
  • بند: No solar input or insufficient light.
• چارجنگ انڈیکیٹر:
  • سبز: بیٹری چارج ہو رہی ہے۔
  • بند: Battery is fully charged or not charging.
• اوور وول۔tagای اشارے:
  • سرخ: ان پٹ جلدtage from solar panel is too high, or battery voltage is overcharge protection level.
• UVW (Battery Voltagای اشارے): Multiple LEDs indicating battery charge level.
• LVD (کم والیومtage Disconnect Indicator):
  • سرخ: بیٹری جلدtage is low, load output has been disconnected.
• اشارے پر لوڈ کریں:
  • سبز: Load output is active.
• Over Load Indicator:
  • سرخ: Load current exceeds the maximum rated current. Load output may be temporarily disconnected.
• Short-Circuit Indicator:
  • سرخ: Short-circuit detected on the load output. Load output will be disconnected.

9 دیکھ بھال

To ensure optimal performance and longevity of your solar charge controller, regular maintenance is recommended:

• صفائی: Periodically clean the exterior of the controller with a dry, soft cloth. Do not use solvents or abrasive cleaners.
• رابطے: Annually check all wiring connections for tightness and corrosion. Loose connections can cause overheating and poor performance.
• وینٹیلیشن: Ensure that the ventilation openings are not blocked and that there is adequate airflow around the unit.
• معائنہ: Inspect the controller for any signs of physical damage, discoloration, or unusual odors.

10 خرابیوں کا سراغ لگانا

11. وضاحتیں

12. وارنٹی اور سپورٹ

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.

نوٹ: مصنوعات کی غیر مجاز جداگانہ یا ترمیم وارنٹی کو کالعدم کر دے گی۔