پی این آئی فنگر 300 بائیو میٹرک ایکسیس کنٹرول سسٹم یوزر مینوئل

1. تعارف

The PNI Finger 300 is a robust biometric access control system designed for secure entry management. It integrates fingerprint recognition, password entry, and electromagnetic card reading capabilities to provide flexible and reliable access solutions. This manual provides essential information for the proper installation, operation, and maintenance of your device.

2. مصنوعات کی خصوصیات

• فنگر پرنٹ ریڈر: Supports up to 3000 fingerprint templates for secure biometric identification.
• RFID Card Access: Compatible with RFID cards, supporting memory for up to 30000 cards.
• پاس ورڈ کا اندراج: Allows access using a numerical password.
• Access Control System Connection: Designed for integration with electromagnetic locks and access buttons.
• مواصلاتی انٹرفیس: Features TCP/IP and RS485 for system integration.
• پائیدار ڈیزائن: IP65 protection class for enhanced durability.

3. پیکیج کے مشمولات

تصدیق کریں کہ نیچے دی گئی تمام اشیاء آپ کے پیکج میں موجود ہیں:

• PNI Finger 300 Identification Unit
• بڑھتے ہوئے لوازمات (پیچ، وال پلگ)
• وائرنگ کنٹرول
• Proximity Card (for testing/initial setup)

Image 3.1: PNI Finger 300 components including the main unit, mounting plate, wiring harness, and an RFID card.

4. پروڈکٹ ختمview

4.1 فرنٹ پینل

تصویر 4.1: سامنے view of the PNI Finger 300 showing the keypad, fingerprint scanner, and status indicators.

The front panel features a numerical keypad for password entry, a fingerprint scanner for biometric identification, and LED indicators for status feedback (e.g., access granted/denied, power status).

4.2 Rear Panel and Wiring

تصویر 4.2: پیچھے view of the PNI Finger 300 with wiring connections and product labels.

The rear panel contains the wiring terminals for power, lock control, alarm, and communication interfaces. Refer to the detailed wiring diagram in Section 5.2 for connection instructions.

5. سیٹ اپ اور انسٹالیشن

5.1 آلہ بڑھتے ہوئے

1. Choose a suitable location for installation, ensuring it is secure and protected from extreme weather conditions if outdoors.
2. Use the provided mounting plate as a template to mark drilling points on the wall.
3. سوراخ کریں اور دیوار کے پلگ ڈالیں۔
4. پیچ کا استعمال کرتے ہوئے دیوار پر چڑھنے والی پلیٹ کو محفوظ کریں۔
5. Attach the PNI Finger 300 unit to the mounting plate.

5.2 وائرنگ ڈایاگرام اور کنکشنز

Carefully connect the wires according to the diagram on the rear panel and the following descriptions:

Ensure all connections are secure and correctly matched to avoid damage to the device or connected systems. Power should only be applied after all wiring is complete.

6. آپریٹنگ ہدایات

6.1 Initial Power-Up and Admin Setup

Upon first power-up, the system will typically be in an uninitialized state. Follow the manufacturer's specific instructions (usually involving a default admin password or a master card) to enter programming mode and set up the initial administrator.

6.2 صارف کی رجسٹریشن

To register new users, the system must be in programming mode (accessed by the administrator).

• فنگر پرنٹ رجسٹریشن: Place the user's finger on the scanner multiple times as prompted until the fingerprint is successfully enrolled.
• کارڈ رجسٹریشن: Present the RFID card to the reader when prompted.
• Password Registration: Enter the desired numerical password using the keypad and confirm.

6.3 سسٹم تک رسائی

Once users are registered, they can gain access using their assigned method:

• فنگر پرنٹ: Place a registered finger on the scanner.
• کارڈ: Present a registered RFID card to the reader.
• پاس ورڈ: Enter the registered password using the keypad, followed by the '#' key (or as specified by system configuration).

A successful access attempt will typically be indicated by a green LED and an audible signal, followed by the unlocking of the connected door.

7 دیکھ بھال

• صفائی: Regularly clean the fingerprint scanner and keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• ماحولیاتی تحفظ: Ensure the device is protected from direct water exposure and extreme temperatures, even with its IP65 rating, to prolong its lifespan.
• فرم ویئر اپ ڈیٹس: Check the PNI webبہترین کارکردگی اور سیکیورٹی کو یقینی بنانے کے لیے کسی بھی دستیاب فرم ویئر اپ ڈیٹس کے لیے وقتاً فوقتاً سائٹ۔

8 خرابیوں کا سراغ لگانا

• ڈیوائس آن نہیں ہو رہی ہے: Verify the 12V DC power supply connection and ensure the power source is active. Check wiring for shorts or disconnections.
• Access Denied (Registered User): Ensure the fingerprint is placed correctly on the scanner, the card is presented properly, or the password is entered accurately. Re-enroll the user if issues persist.
• دروازہ نہ کھولنا: Check the wiring to the electromagnetic lock. Ensure the lock itself is functioning correctly and receiving power. Verify the system's lock release settings.
• کی پیڈ غیر جوابدہ: Check for physical damage or debris. If the issue persists, a system reset or professional inspection may be required.

9. وضاحتیں

10. وارنٹی اور سپورٹ

For warranty information, technical support, or service inquiries, please refer to the official PNI website or contact your authorized dealer. You can also visit the ایمیزون پر پی این آئی اسٹور اضافی مصنوعات کی معلومات اور معاون وسائل کے لیے۔