اسمارٹ UF70 DLP پروجیکٹر صارف دستی

تعارف

This manual provides essential information for the proper setup, operation, and maintenance of your Smart UF70 DLP Projector. Please read this manual thoroughly before using the projector to ensure optimal performance and longevity.

Figure 1: Smart UF70 DLP Projector, showing its compact design and side ventilation.

سیٹ اپ

پیک کھولنا اور معائنہ

Carefully remove all components from the packaging. Verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your dealer immediately.

• Smart UF70 Projector Unit
• پاور کیبل
• ریموٹ کنٹرول
• HDMI کیبل (پیکیج کے لحاظ سے مختلف ہو سکتے ہیں)

Figure 2: Included accessories with the Smart UF70 Projector, typically including a remote control and necessary cables.

جگہ کا تعین

The Smart UF70 is an ultra-short throw projector, designed to project a large image from a very short distance. Place the projector on a stable, flat surface directly in front of the projection screen or wall. Ensure adequate ventilation around the projector.

کنکشنز

Connect your source devices (e.g., laptop, Blu-ray player) to the projector using the appropriate cables. The UF70 supports various input types.

• طاقت: Connect the power cable to the projector's AC input and then to a wall outlet.
• HDMI: For high-definition video and audio, connect an HDMI cable from your source device to the HDMI port on the projector.
• وی جی اے: For computer connections, use a VGA cable.
• آڈیو ان/آؤٹ: Use 3.5mm mini-jack cables for external audio devices.
• نیٹ ورک (RJ-45): For network control or updates.
• USB ٹائپ بی: For control or service.

Figure 3: Rear panel of the Smart UF70 Projector, illustrating the array of connectivity options including HDMI, VGA, Audio, Network, and USB ports.

آپریٹنگ ہدایات

پاورنگ آن/آف

• پاور آن: Press the power button on the projector or the remote control. The power indicator light will change.
• بجلی بند: Press the power button again. A confirmation message may appear. Press again to confirm shutdown. Allow the projector to cool down before unplugging.

ان پٹ سورس کا انتخاب

Use the "Source" or "Input" button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, Composite, etc.).

فوکس ایڈجسٹمنٹ

The UF70 features a manual focus ring. Rotate the focus ring located near the lens until the projected image is sharp and clear.

تصویر 4: اوپر view of the Smart UF70 Projector, highlighting the lens and focus adjustment mechanism.

مینو نیویگیشن

Use the menu button on the remote or projector to access settings. Navigate using arrow keys and confirm selections with the OK/Enter button. Adjust settings such as brightness, contrast, aspect ratio, and keystone correction.

دیکھ بھال

پروجیکٹر کی صفائی

• بیرونی: Use a soft, dry cloth to wipe the projector's casinجی ضدی نشانات کے لیے، تھوڑا سا ڈیampen the cloth with water. Avoid abrasive cleaners.
• لینس: Gently clean the projector lens with a lens cleaning cloth or lens paper. Do not use liquid cleaners directly on the lens.
• ایئر وینٹ: مناسب ہوا کے بہاؤ کو یقینی بنانے اور زیادہ گرمی کو روکنے کے لیے ہوا کے وینٹوں کو وقتاً فوقتاً چیک کریں اور صاف کریں۔ نرم برش یا کمپریسڈ ہوا استعمال کریں۔

Lamp زندگی اور متبادل

The Smart UF70 uses a long-life DLP lamp. Lamp life can vary based on usage and mode. When the lamp reaches the end of its life, a warning message may appear, or the projector may not power on. Refer to the full service manual or contact authorized service personnel for lamp متبادل طریقہ کار

خرابی کا سراغ لگانا

یہ سیکشن عام مسائل کو حل کرتا ہے جن کا آپ کو سامنا ہو سکتا ہے۔ مزید پیچیدہ مسائل کے لیے، مینوفیکچرر کے معاون وسائل سے مشورہ کریں۔

وضاحتیں

وارنٹی اور سپورٹ

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Smart Technologies webسائٹ وارنٹی دعووں کے لیے خریداری کے ثبوت کے طور پر اپنی خریداری کی رسید رکھیں۔

آن لائن وسائل: For the most up-to-date drivers, firmware, and detailed troubleshooting guides, please visit the manufacturer's official support page.