FSP iFP 600

FSP iFP600 Uninterruptible Power Supply (UPS) User Manual

Model: iFP 600

1. تعارف

This manual provides essential instructions for the installation, operation, and maintenance of your FSP iFP600 Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installing or operating the unit to ensure proper function and safety. The FSP iFP600 is designed to provide reliable power backup and surge protection for your electronic devices.

FSP iFP600 UPS front view LCD ڈسپلے کے ساتھ

تصویر 1.1: سامنے view of the FSP iFP600 UPS, showcasing اس کا کمپیکٹ ڈیزائن اور مربوط LCD ڈسپلے۔

2. حفاظتی ہدایات

Please adhere to these important safety guidelines during installation, operation, and maintenance of the UPS:

  • UPS نہ کھولیں casinجی اندر کوئی صارف کے قابل خدمت حصے نہیں ہیں۔ تمام سروسنگ کو اہل سروس اہلکاروں سے رجوع کریں۔
  • Do not connect appliances that could overload the UPS, such as laser printers, vacuum cleaners, or heaters.
  • Ensure the UPS is connected to a grounded AC power outlet.
  • Avoid placing the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
  • Position the UPS in a well-ventilated area to prevent overheating.
  • In case of fire, use a dry chemical extinguisher. Water can be hazardous.
  • UPS کے اندر کی بیٹری صارف کے لیے بدلنے کے قابل نہیں ہے۔ بیٹری کی تبدیلی صرف اہل اہلکاروں کے ذریعہ کی جانی چاہئے۔

3. پروڈکٹ ختمview

The FSP iFP600 UPS provides reliable power protection for your critical electronics. It features a compact design and an intuitive LCD display for monitoring status.

3.1 پیکیج کے مشمولات

پیکج کو کھولنے پر، براہ کرم تصدیق کریں کہ تمام اجزاء موجود ہیں اور بغیر کسی نقصان کے:

  • FSP iFP600 UPS Unit
  • صارف دستی (یہ دستاویز)
  • پاور کی ہڈی
  • USB کمیونیکیشن کیبل
FSP iFP600 UPS with its retail packaging

Image 3.1: The FSP iFP600 UPS shown alongside its retail packaging, illustrating the product's presentation.

3.2 ریئر پینل کے اجزاء

Familiarize yourself with the connections on the rear panel of the UPS:

Rear panel of FSP iFP600 UPS showing outlets, AC input, fuse, USB, and RJ11/RJ45 ports

تصویر 3.2: تفصیلی view of the FSP iFP600 UPS rear panel, highlighting connection points.

  1. آؤٹ لیٹس: Two SCHUKO type outlets for connecting protected equipment.
  2. AC ان پٹ: Connects the UPS to the main utility power.
  3. Fuse/Breaker: Overcurrent protection for the UPS.
  4. USB مواصلات: Port for connecting to a computer for monitoring and management.
  5. Combo RJ11/RJ45 Surge Protection: Provides surge protection for telephone/network lines.

4. سیٹ اپ اور انسٹالیشن

Follow these steps to set up your FSP iFP600 UPS:

  1. پیک کھولنا: UPS کو احتیاط سے اس کی پیکیجنگ سے ہٹا دیں۔ شپنگ کے کسی بھی نقصان کا معائنہ کریں۔
  2. جگہ کا تعین: Place the UPS on a flat, stable surface in a clean, cool, and well-ventilated area. Ensure adequate clearance around the unit for airflow.
  3. ابتدائی چارجنگ: Connect the UPS to a standard grounded AC outlet using the provided power cord. Allow the unit to charge for at least 4-6 hours before initial use to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
  4. کنیکٹنگ کا سامان: Plug your computer, monitor, and other critical electronic devices into the UPS outlets (A). Do not connect surge suppressors or power strips to the UPS outlets.
  5. USB مواصلات (اختیاری): Connect the USB cable from the UPS USB port (D) to your computer's USB port to enable power management software features (software not included, typically downloaded from manufacturer's webسائٹ)۔
  6. RJ11/RJ45 Protection (Optional): For surge protection of your telephone or network line, connect the incoming line to the 'IN' port of the Combo RJ11/RJ45 (E) and connect the 'OUT' port to your device.

5. آپریٹنگ ہدایات

5.1 پاور آن/آف۔

  • پاور آن کرنے کے لیے: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the LCD display illuminates.
  • پاور آف کرنا: Press and hold the power button for approximately 2 seconds until you hear a beep and the LCD display turns off.

5.2 LCD ڈسپلے کی معلومات

The FSP iFP600 features an LCD display that provides real-time status information. The display is touch-sensitive for navigating information.

Close-up of FSP iFP600 UPS LCD display showing '230V' and a finger touching it

Image 5.1: The LCD display of the FSP iFP600 UPS, indicating voltage output and its touch-screen functionality.

The LCD display typically shows:

  • ان پٹ جلدtage
  • آؤٹ پٹ والیمtage
  • بیٹری چارج لیول
  • لوڈ لیول
  • Operating Mode (e.g., AC mode, Battery mode)
  • Warning/Fault Indicators

5.3 بیٹری موڈ آپریشن

When the utility power fails or fluctuates outside acceptable limits, the UPS will automatically switch to battery mode. During battery mode, the UPS will provide power to connected equipment from its internal battery. An audible alarm will sound to indicate battery operation.

6 دیکھ بھال

مناسب دیکھ بھال آپ کے UPS کی لمبی عمر اور وشوسنییتا کو یقینی بناتی ہے۔

  • صفائی: Use a soft, dry cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
  • بیٹری کی دیکھ بھال: To maximize battery life, ensure the UPS is connected to AC power and fully charged. If the UPS is stored for an extended period, recharge it every three months to prevent battery degradation.
  • بیٹری کی تبدیلی: The internal battery (12V / 7Ah x1) is not user-serviceable. Battery replacement should only be performed by FSP-certified service personnel or a qualified technician. Incorrect battery replacement can pose a risk of explosion or injury.
  • ذخیرہ: Store the UPS in a cool, dry place with adequate ventilation. Ensure the battery is fully charged before storage.

7 خرابیوں کا سراغ لگانا

Refer to the following table for common issues and their solutions. If the problem persists, contact FSP support.

علامتقابل سماعت الارمممکنہ وجہحل
UPS operating on battery powerہر 10 سیکنڈ میں بیپ ہوتا ہےUtility power failure or fluctuationSave work and shut down equipment if power outage is prolonged. UPS will return to AC mode when power is restored.
کم بیٹری کی وارننگہر سیکنڈ میں بیپسبیٹری چارج انتہائی کم ہے۔Immediately save work and shut down connected equipment.
اوور لوڈ کی حالتہر 0.5 سیکنڈ میں بیپسConnected equipment exceeds UPS capacityDisconnect non-essential equipment until the alarm stops. Ensure total load is within UPS capacity.
UPS کی خرابی۔مسلسل بیپ بجانااندرونی خرابی یا خرابی۔Turn off the UPS and disconnect it from the AC outlet. Contact FSP technical support.
Specification table for FSP iFP series UPS models, including alarm indicators

Image 7.1: Excerpt from the FSP iFP series specification table, detailing alarm indicators and their meanings.

8. وضاحتیں

Detailed technical specifications for the FSP iFP600 UPS:

فیچرتفصیلات
ماڈلآئی ایف پی 600
صلاحیت600 وی اے / 360 ڈبلیو
ان پٹ جلدtage110/120 Vac or 220/230/240 Vac
ان پٹ جلدtagای رینج81-145 Vac / 140-290 Vac
ان پٹ فریکوئنسی رینج60/50 ہرٹج (آٹو سینسنگ)
آؤٹ پٹ والیمtage110/120 Vac or 220/230/240 Vac
AC جلدtagای ریگولیشن (بیٹ موڈ)±10%
Output Frequency Range (Batt. Mode)60 Hz or 50 Hz ±1 Hz
منتقلی کا وقتعام 2-6 ms
ویوفارم (بٹ. موڈ)نقلی سینی ویو
بیٹری کی قسم اور نمبر12V / 7Ah x1
عام ریچارج کا وقت4 گھنٹے تک 90% صلاحیت
اشارےLCD Display (Touch panel with digital information)
تحفظOverload, Discharge, and Overcharge Protection
شے کا وزن9.24 پاؤنڈ (4.2 کلوگرام)
پروڈکٹ کے طول و عرض (LxWxH)11.81 x 3.98 x 5.59 انچ
رنگسیاہ
مواددھات

9. وارنٹی اور سپورٹ

FSP products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official FSP website. For technical support, troubleshooting assistance, or service inquiries, please contact FSP customer service through their official channels.

آپ پر مزید معلومات اور معاون وسائل حاصل کر سکتے ہیں۔ FSP Store on Amazon.

متعلقہ دستاویزات - آئی ایف پی 600

پریview Guia do Utilizador FSP Online UPS 1K/2K/3K
Este manual fornece instruções essenciais de segurança, instalação e operação para os sistemas FSP Online UPS modelos 1K, 2K e 3K, cobrindo especificações técnicas e manutenção.
پریview Manuale Utente FSP Online UPS 1K/2K/3K: Guida Completa
Scopri come installare, configurare e utilizzare il tuo FSP Online UPS 1K, 2K o 3K con questo manuale utente dettagliato. Include precauzioni di sicurezza, specifiche tecniche e guide alla manutenzione.
پریview Manual do Utilizador FSP Online UPS 1K/2K/3K: Segurança, Instalação e Especificações
Guia completo para o FSP Online UPS 1K/2K/3K, cobrindo precauções de segurança essenciais, instruções detalhadas de instalação e configuração, orientações de uso, manutenção e especificações técnicas para garantir o desempenho ideal.
پریview FSP آن لائن UPS 1K/2K/3K Användarguide och Specifikationer
Denna guide ger detaljerade instruktioner for installation, drift och underhåll av FSP Online UPS-modelerna 1K, 2K اور 3K۔ Innehåller säkerhetsvarningar, tekniska specifikationer och felsökningsinformation.
پریview FSP آن لائن UPS 1K/2K/3K Felhasználói Kézikönyv és Útmutató
Ez a dokumentum az FSP Online UPS 1K, 2K és 3K sorozat biztonságos és hatékony üzemeltetéséhez nyújt alapvető információkat. Részletezi a fontos biztonsági óvintézkedéseket, a lépésről lépésre történő telepítési eljárásokat és a helyes használatra vonatkozó útmutatásokat. A felhasználók átfogó utasításokat találnak az UPS csatlakoztatásához, működési módjainak megértéséhez és az alapvető karbantartás elvégzéséhez. Az útmutató továbbá ismerteti a hibaelhárítási lépéseket és az FSP Online UPS modellek műszaki specifikációit.
پریview FSP Rack/Tower Online UPS 1K/1.5K/2K/3K User Manual
Comprehensive user manual for FSP Rack/Tower Online UPS models 1K, 1.5K, 2K, and 3K. This guide covers safety instructions, installation, operation, maintenance, troubleshooting, and detailed technical specifications.