Rollerhouse AC227-13 Single Radio Receiver

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Rollerhouse AC227-13 Single Radio Receiver. Designed for wall mounting, this 433MHz receiver offers reliable wireless control for garage door openers, gate systems, and other compatible devices. Please read this manual thoroughly before installation and use to ensure proper function and safety.

شکل 1: سامنے اور پیچھے view of the Rollerhouse AC227-13 Single Radio Receiver, showing its compact design and terminal block.

2. مصنوعات کی خصوصیات

• 433MHz Long-Range Signal: Provides reliable wireless control up to 500 feet in open areas, suitable for garage doors, gates, and alarm systems.
• آسان دیوار پر نصب تنصیب: Features a compact design with pre-drilled screw holes for secure and straightforward mounting.
• عالمگیر مطابقت: Designed to work with most 433MHz transmitters, including A-OK and other switch control motors.
• Simple Pairing & LED Indicator: Facilitates quick synchronization with compatible transmitters. An integrated LED confirms successful signal reception.

3. پیکیج کے مشمولات

تصدیق کریں کہ تمام اشیاء پیکیج میں موجود ہیں:

• 1x AC227-13 Radio Receiver
• 1x Quick-start guide (refer to this manual for detailed instructions)

Figure 2: The AC227-13 receiver alongside its product packaging, indicating a "Wall Type Radio Receiver".

4. وضاحتیں

شکل 3: تفصیلی view of the receiver's back panel, showing the model number, input/output specifications, and CE marking.

5. حفاظتی معلومات

آلہ کو چوٹ یا نقصان سے بچنے کے لیے براہ کرم درج ذیل حفاظتی تدابیر پر عمل کریں:

• Always disconnect power before performing any installation, wiring, or maintenance.
• Ensure all wiring is done by a qualified electrician and complies with local electrical codes.
• Do not expose the receiver to moisture, extreme temperatures, or direct sunlight.
• بچوں کی پہنچ سے دور رکھیں۔
• خود ڈیوائس کو کھولنے یا مرمت کرنے کی کوشش نہ کریں۔ تمام خدمات کو اہل اہلکاروں سے رجوع کریں۔

6. سیٹ اپ اور انسٹالیشن

6.1 وال ماونٹنگ

The AC227-13 receiver is designed for easy wall mounting. Choose a suitable location near your garage door opener or gate control system, ensuring it is protected from environmental elements and within range of your transmitter.

1. Identify a flat, stable surface for mounting.
2. Use the receiver as a template to mark the positions for the mounting screws.
3. Drill pilot holes if necessary, suitable for your mounting screws.
4. Secure the receiver to the wall using appropriate screws (not included).

6.2 وائرنگ کی ہدایات

Refer to the wiring diagram below for proper connection. Ensure power is disconnected before wiring.

Figure 4: Detailed wiring diagram illustrating connections for DC motor, 12V power, control signals (GND, STOP, DOWN, UP), AC input (L, N), and external manual switch/wind/light/rain sensors.

• AC IN (L, N): Connect your 100-240VAC power supply to these terminals.
• CONTROL (GND, STOP, DOWN, UP): These terminals are for connecting external manual switches or sensors (e.g., wind, light, rain sensors).
• DC MOTOR (M+/-, M+/-): Connect your 24V DC motor to these terminals. Ensure correct polarity.
• 12V (12V, GND): Provides a 12V DC output for powering compatible external devices or sensors.

7. آپریشن

7.1 Pairing with Transmitters

The AC227-13 receiver features a simple pairing process. Refer to your transmitter's manual for specific instructions on initiating pairing mode. Generally, you will need to press a pairing button on the receiver (often indicated by an LED) and then activate the desired button on your transmitter.

• Locate the pairing button on the receiver (often a small button near the LED indicator).
• Press and hold the pairing button until the LED indicator changes state (e.g., blinks rapidly).
• Within a few seconds, press the button on your 433MHz transmitter that you wish to pair.
• The LED on the receiver should confirm successful pairing (e.g., solid light, then off).

7.2 بنیادی کنٹرول

Once paired, the receiver will respond to signals from your transmitter. The typical functions are:

Figure 5: Front panel of the AC227-13 receiver, highlighting the UP, STOP, and DOWN control buttons and the indicator light for setting.

• یوپی: Activates the motor to move the garage door or gate upwards.
• روکیں: Halts the motor's movement.
• نیچے: Activates the motor to move the garage door or gate downwards.

8 خرابیوں کا سراغ لگانا

9 دیکھ بھال

The Rollerhouse AC227-13 receiver requires minimal maintenance:

• آلے کو صاف اور دھول اور ملبے سے پاک رکھیں۔ صفائی کے لیے نرم، خشک کپڑا استعمال کریں۔
• وقفے وقفے سے وائرنگ کنکشن چیک کریں تاکہ یہ یقینی بنایا جا سکے کہ وہ محفوظ ہیں۔
• Avoid exposing the unit to harsh chemicals or abrasive cleaners.

10. وارنٹی اور سپورٹ

Rollerhouse products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Rollerhouse webسائٹ

If you encounter any issues or have questions regarding the installation or operation of your AC227-13 receiver, please contact Rollerhouse customer support. Provide your product model number and a detailed description of the issue for faster assistance.

مزید مدد کے لیے، آپ ملاحظہ کر سکتے ہیں۔ Rollerhouse Store on Amazon.