Dr Trust USA 3-in-1 Nano Ionic Facial Steamer, Humidifier, and Towel Warmer

تعارف

The Dr Trust USA 3-in-1 Nano Ionic Facial Steamer, Humidifier, and Towel Warmer is a versatile appliance designed for personal care. It combines three functions: a facial steamer for skin rejuvenation, a room humidifier to add moisture to the air, and a towel warmer for warm, moist towels. This manual provides essential information for safe and effective use.

Figure 1: Dr Trust USA 3-in-1 Nano Ionic Facial Steamer, Humidifier, and Towel Warmer.

اہم حفاظتی ہدایات

To reduce the risk of burns, electrocution, fire, or injury, always follow these basic safety precautions:

• استعمال سے پہلے تمام ہدایات پڑھیں۔
• اگر ہڈی یا پلگ خراب ہو تو کام نہ کریں۔
• Keep the appliance away from water. Do not immerse in water or other liquids.
• استعمال میں نہ ہونے پر اور صفائی سے پہلے آؤٹ لیٹ سے ان پلگ کریں۔
• باہر استعمال نہ کریں۔
• Use only pure, filtered water in the water tank.
• بچوں کی پہنچ سے دور رکھیں۔
• Do not add essential oils or other substances directly into the water tank. Use the designated aroma tray if available.
• اس بات کو یقینی بنائیں کہ آپریشن کے دوران آلہ کو ایک مستحکم، ہموار سطح پر رکھا گیا ہے۔

مصنوعات کے اجزاء

Familiarize yourself with the parts of your Dr Trust 3-in-1 Steamer:

• Steam Spout: Directs steam.
• Water Tank (225 ml capacity): Holds water for steaming and humidifying.
• کنٹرول نوب: Selects operating modes (Off, Warm Towel, Facial Steamer, Humidifier).
• Towel Chamber: For warming small towels.
• Inner Ionization Plate: Generates nano-ionic steam.
• Auto Shut-off Sensor: Safety feature to prevent dry boiling.
• ماپنے کا کپ: درست پانی بھرنے کے لیے۔

Figure 2: Key components of the Dr Trust 3-in-1 Nano Ionic Facial Steamer.

سیٹ اپ اور پہلا استعمال

1. پیک کھولیں: پیکیجنگ سے تمام اجزاء کو احتیاط سے ہٹا دیں۔
2. صاف: یونٹ کے بیرونی حصے کو نرم سے صاف کریں، ڈیamp cloth. Ensure the water tank and steam spout are clean.
3. پانی کے ٹینک کو بھریں:
   • مرکزی یونٹ سے پانی کے ٹینک کو ہٹا دیں۔
   • Use the provided measuring cup to fill the water tank with pure, filtered water. Do not exceed the maximum fill line.
   • پانی کے ٹینک کو محفوظ طریقے سے مرکزی یونٹ میں واپس رکھیں۔
   

   Figure 3: Filling the water tank with pure, filtered water.
4. پاور سے رابطہ کریں: Plug the power cord into a suitable electrical outlet (220V, 50Hz).

آپریٹنگ ہدایات

1. Facial Steamer Mode

This mode generates nano-ionic steam to open pores, cleanse skin, and improve product absorption.

1. یقینی بنائیں کہ پانی کی ٹینک بھری ہوئی ہے۔
2. Turn the control knob to the "Facial Steamer" setting.
3. Steam will begin to generate within seconds.
4. Position your face approximately 20 cm (8 inches) from the steam spout. Close your eyes and relax.
5. The facial steaming session typically lasts 15-20 minutes. The device will automatically shut off when the water level is low.

Figure 4: Using the facial steamer for skin rejuvenation.

Fruit Sauna Facial / Aromatherapy

For an enhanced experience, you can add fruits, vegetables, or essential oils:

1. Unlock and remove the steam head.
2. Place small pieces of fruits, vegetables, or a few drops of essential oil into the designated aroma tray (if available) or a small beaker placed in the towel chamber.
3. Replace the steam head and lock it into position.
4. Proceed with facial steaming as described above.

Figure 5: The Nano Ionic Steam generation process.

2. Humidifier Mode

Use this mode to add moisture to the air in your room, helping to alleviate dry skin, irritated sinuses, and congestion.

1. یقینی بنائیں کہ پانی کی ٹینک بھری ہوئی ہے۔
2. Turn the control knob to the "Humidifier" setting.
3. The device will start humidifying the room within 30 seconds.
4. This mode can run for up to 30-40 minutes on a full tank, depending on the setting.

3. Warm Towel Mode

Quickly warm small towels or flannels for a soothing experience, ideal for relaxing tired eyes, relieving headaches, or removing makeup.

1. یقینی بنائیں کہ پانی کی ٹینک بھری ہوئی ہے۔
2. Unlock and remove the steam head.
3. Roll up a small, clean towel or flannel and place it into the towel chamber.
4. Replace the steam head and lock it into position.
5. Turn the control knob to the "Warm Towel" setting.
6. Allow a few minutes for the towel to warm and become moist.
7. Carefully remove the warm towel (it may be hot) and apply it to your face or desired area.

Figure 6: Preparing a warm towel using the towel warming function.

دیکھ بھال اور صفائی

Regular cleaning ensures optimal performance and longevity of your device.

1. ان پلگ: آلے کو ہمیشہ ان پلگ کریں اور اسے صاف کرنے سے پہلے مکمل ٹھنڈا ہونے دیں۔
2. خالی پانی کی ٹینک: پانی کی ٹینک کو ہٹا دیں اور باقی پانی کو خالی کریں۔
3. صاف پانی کا ٹینک: Rinse the water tank with clean water. For thorough cleaning, use a mild detergent and a soft brush, then rinse thoroughly.
4. Clean Steam Spout/Towel Chamber: Wipe the steam spout and towel chamber with a soft, damp cloth. If mineral deposits accumulate, use a solution of white vinegar and water (1:1 ratio) to gently clean, then rinse with clean water.
5. خشک: Ensure all parts are completely dry before reassembling or storing the device.
6. ذخیرہ: آلے کو ٹھنڈی، خشک جگہ پر، براہ راست سورج کی روشنی اور نمی سے دور رکھیں۔

خرابی کا سراغ لگانا

وضاحتیں

وارنٹی اور سپورٹ

For warranty information, product support, or service inquiries, please refer to the warranty card included with your product or visit the official Dr Trust website. Contact details for customer support are typically provided in the product packaging or on the manufacturer's webسائٹ

Manufacturer Contact: Nureca Limited, B2-166, Time Square, 7th and 8th Floor, CTS No 349 and 349-1, Western Express Highway, Andheri East, Mumbai, Mumbai City, Maharashtra, 400069, India. Tel: 7527013265.