LAUNCH CRP123I V2.0 Elite OBD2 Scanner Instruction Manual

1. تعارف

The LAUNCH CRP123I V2.0 Elite OBD2 Scanner is a professional diagnostic tool designed for personal vehicle owners and automotive enthusiasts. It provides comprehensive diagnostic functions for four main systems: Engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission. Additionally, it offers various reset services and full OBD2 modes to assist in vehicle maintenance and troubleshooting.

Figure 1: LAUNCH CRP123I V2.0 Elite OBD2 Scanner

2. باکس میں کیا ہے۔

Upon unboxing your LAUNCH CRP123I V2.0, please ensure all the following components are present:

• CRP123I V2.0 Scan Tool
• Main Cable (OBD2 connection cable)
• USB کیبل (چارج کرنے اور ڈیٹا کی منتقلی کے لیے)
• کیرینگ بیگ
• صارف دستی

شکل 2: پیکیج کے مشمولات

3. سیٹ اپ

Before initial use, it is recommended to fully charge the device and perform a software update to ensure optimal performance and compatibility with the latest vehicle models.

3.1. ڈیوائس کو چارج کرنا

The CRP123I V2.0 is equipped with a 6000mAh Lithium Ion battery. It can be charged via the provided USB cable connected to a power adapter or by plugging the main diagnostic cable into a vehicle's OBD2 port. The charging indicator light will be red when charging and turn green when fully charged.

3.2 ابتدائی پاور آن اور وائی فائی کنکشن

Upon first power-on, the device will prompt you to select your language and time zone. A Wi-Fi connection is required for initial registration and software updates. The device supports 2.4GHz Wi-Fi networks. Connect to a stable Wi-Fi network using the touchscreen interface.

3.3. سافٹ ویئر اپ ڈیٹ

The LAUNCH CRP123I V2.0 comes with lifetime free updates. After connecting to Wi-Fi, navigate to the 'Upgrade' icon on the main menu. The system will check for available updates. Select the functions you wish to update and proceed with the download and installation. It is highly recommended to update the software before performing any diagnostic operations.

Figure 3: Software Update Interface

4. آپریٹنگ ہدایات

The LAUNCH CRP123I V2.0 is designed for user-friendly operation via its 5-inch touchscreen and physical buttons. Ensure the device is connected to the vehicle's OBD2 port before starting diagnostic procedures.

4.1 گاڑی سے جڑنا

1. Locate the vehicle's 16-pin OBD2 diagnostic port (usually under the dashboard).
2. Plug the main diagnostic cable into the OBD2 port.
3. Turn the vehicle's ignition to the 'ON' position (engine can be off or running, depending on the test).
4. The scanner will power on automatically.

Figure 4: Connecting the Scanner

4.2. System Diagnostics (Engine, ABS, SRS, Transmission)

The CRP123I V2.0 can access and diagnose critical vehicle systems. From the main menu, select 'Diagnose'. The device will attempt to automatically identify the vehicle's VIN. If successful, it will proceed to the system selection. If not, you may need to manually select the vehicle make, model, and year.

Figure 5: 4-in-1 Diagnostic Scanner Overview

Once connected, you can choose to perform a 'System Scan' to check all supported systems or select individual systems (Engine, ABS, SRS, Transmission) for specific diagnostics. The scanner will read fault codes, display critical parameters, and allow you to clear codes after repairs.

Figure 6: Vehicle System Scan Capabilities

4.3. Full OBD2 Modes

The device supports all 10 OBD2 test modes, allowing for comprehensive emission-related diagnostics:

• کوڈز پڑھیں: Display Diagnostic Trouble Codes (DTCs).
• کوڈز مٹائیں: Clear DTCs and reset monitors.
• I/M تیاری: Check emission system readiness.
• لائیو ڈیٹا سٹریم: View real-time data parameters.
• منجمد ڈھانچہ: View snapshot data when a fault code is set.
• O2 سینسر ٹیسٹ: O2 سینسر مانیٹر ٹیسٹ کے نتائج بازیافت کریں۔
• آن بورڈ مانیٹر ٹیسٹ: Retrieve results for emission-related powertrain components.
• EVAP سسٹم ٹیسٹ: Initiate a test of the vehicle's EVAP system.
• گاڑی کی معلومات: Retrieve VIN, Cal ID, CVN.
• DTC تلاش: Built-in DTC library for code definitions.

Figure 7: Full OBD2 Modes

4.4 لائیو ڈیٹا اسٹریم

The Live Data Stream function allows you to view real-time data from various sensors and components. You can select specific parameters to monitor and display them in a 4-in-1 graphical format for easier analysis. This is particularly useful for identifying intermittent issues or verifying repairs.

Figure 8: Live Data Stream Interface

4.5 خدمات کو دوبارہ ترتیب دیں۔

The CRP123I V2.0 offers 7 common reset services to facilitate routine maintenance:

• آئل ری سیٹ: Resets the engine oil life system.
• SAS ری سیٹ: اسٹیئرنگ اینگل سینسر کو ری سیٹ کرتا ہے۔
• بریک ری سیٹ (EPB): Resets the Electronic Parking Brake.
• تھروٹل دوبارہ سیکھنا: تھروٹل باڈی پوزیشن کو دوبارہ سیکھتا ہے۔
• ڈی پی ایف کی تخلیق نو: Initiates Diesel Particulate Filter regeneration.
• ABS Auto Bleed: Performs automated bleeding procedure for ABS systems.
• Battery Reset (BMS): Registers new battery replacement and clears fault information.

Figure 9: Available Reset Services

4.6. Auto-VIN Scan

The Auto-VIN function allows the scanner to automatically identify the vehicle's Vehicle Identification Number (VIN) for quick and convenient vehicle selection and diagnosis. This feature streamlines the diagnostic process by eliminating manual input.

Figure 10: Auto-VIN Scan

4.7. Health Report and Sharing

The scanner can generate a comprehensive health report of the vehicle's systems. This report can be printed or shared via email when the device is connected to the internet, allowing for easy record-keeping or sharing with a mechanic.

Figure 11: Generating and Sharing Diagnostic Reports

5 دیکھ بھال

To ensure the longevity and optimal performance of your LAUNCH CRP123I V2.0 scanner, follow these maintenance guidelines:

• آلے کو صاف اور دھول اور نمی سے پاک رکھیں۔ صفائی کے لیے نرم، خشک کپڑا استعمال کریں۔
• Store the device in its carrying bag when not in use to protect it from physical damage.
• Regularly update the software via Wi-Fi to ensure compatibility with new vehicle models and to receive performance enhancements.
• طویل عرصے تک آلہ کو انتہائی درجہ حرارت یا براہ راست سورج کی روشنی کے سامنے آنے سے گریز کریں۔

6 خرابیوں کا سراغ لگانا

If you encounter issues with your LAUNCH CRP123I V2.0, consider the following common troubleshooting steps:

• ڈیوائس آن نہیں ہو رہی ہے: Ensure the device is fully charged or properly connected to the vehicle's OBD2 port with the ignition on.
• گاڑی کے ساتھ مواصلاتی خرابی: Verify that the diagnostic cable is securely connected to both the scanner and the vehicle's OBD2 port. Ensure the vehicle's ignition is in the 'ON' position. Check for any other OBD communication components installed on the vehicle and remove them if present.
• سافٹ ویئر اپ ڈیٹ کے مسائل: Ensure a stable 2.4GHz Wi-Fi connection. If updates fail, try restarting the device and your Wi-Fi router.
• غلط پڑھنا: Ensure the software is up-to-date. Verify the vehicle information (VIN, model year) is correctly identified by the scanner.

For persistent issues, please contact LAUNCH customer service at autoscope@163.com.

7. وضاحتیں

8. وارنٹی اور سپورٹ

The LAUNCH CRP123I V2.0 comes with a lifetime warranty and lifetime free updates. This ensures your device remains current with the latest vehicle technologies and diagnostic protocols without additional cost.

For any questions or technical assistance, please contact our 24/7 professional service team via email at autoscope@163.com. Please note that while the tool is compatible with many vehicle brands, vehicle logos indicate compatibility only and do not imply affiliation with automakers. For specific vehicle compatibility, it is recommended to confirm using your vehicle's year, model, and VIN before purchase.